Separate names with a comma.
This ones not going in sideways[ATTACH] [ATTACH]
Thats a good idea also. Not sure it would work with the stabilizing ring
Thanks trailbeast, I will give that a try
Trailbeast have you installed one of the super servos?
I can't seem to get the seal to slide past the retaining ring groove. Without the seal it...
What is the rest of your combo.
What stall is the converter you have.
Is that their 11" converter
Welcome. Just up the road in dutchess county
A-body Grey primer with black front end .
B-body, wouldn't matter what color as long as it originally came with one of those big wings and pointy...
Those K029 were the lowest priced ones i found. $39.50. Just have to make a spacer, or put washers where the spring goes. Some of the others I was...
Here it is, came right out when I figured out the right way to turn it.
Now to find a replacement. I see there are at least 4 differtent brands....
And we have a winner. Thanks traibeast.
That servo got hammered .
Now I just have to get it past the arm. Been so long sinve I have had the...
Never mind, for some reason I was thinking mine was reversed. It's not.[ATTACH]
Is this what it should look like?
Reverse servo is the rear servo, front servo is kickdown servo?[ATTACH]
Thanks for the chart
Thanks, leads me to believe, its the converter more than anything. Fluid is clean. Filter was tight.
Should I be able to push up the piece that...
Yes, there is no junk in the pan, no burnt smell, and fluid looks normal.
I figure it might have something to do with the servo, but figured I...
My very low mileage 727 lost almost all reverse . tried to take it out of the garage on father's day. Started backing out of garage and...
What does it run
Yes, its interesting there is no visible rust in or near the cracks.rust on the frame rails farther back. This section had grease and grime over...
Did the cracks look like this?
And yes, I do realize this thread is 3 years old, but it is the most relevant to what I was searching for.[ATTACH]...
Hey that's cool. What engine is going in it?
The top was painted by the po. Apparently the new top blew off. I need to sand it all down and redo it, as the paint is over top...
How's everything going.?
Getting back working on my Dart, but now with my son. So I will be poking my head in here more and more.
Never did do anything with the 340 but put it on the engine stand.
Put a 440 in the demon
Great thread. Going to be looking at my transmission again. I rebuilt it many years ago,but it only has about 100 miles on it, maybe 200.
Thanks. I tried fastenal and they had nothing. Where did the kit come from?
Fisher, where did you get those bolts. I was looking for a set when I was moving stuff around under the car a few months back. I couldn't find any.
Ok, thanks everybody.
You know your inbox is full.
Tried to send message and couldn't.