Separate names with a comma.
Outstanding , thank you . I had the exact issue with the hangers . Called them , no help . Bent the hangers , worked fine . TTI knows this but...
I'm a little confused here . I understand the 1/2" fuel line . I don't understand why the adapter to 1/4". If you wish to retain the factor tank...
$1500 build , a.y.s.m.
I think the man goes by the name of "Imperial Motors"
I have 2 pulleys . One is 6 3/8"x 1 5/8" which is for a/c . The other is 7 1/2" x ? which i'm thinkin' is wrong offset . Sorry !
IF you are determined to install a smaller pulley first you must know the working diameter (not overall) of the pulley you have . I have some but...
20 minutes @ 2200 rpm to break in the cam . another 20 minutes @ various rpm's to seat the rings . If you pre-oiled it . change oil . hot and...
Love the car , good luck .
Anchors need to be IN the concrete . I suggest "Tap-Con". You need a hammer drill .
Jim Kramer of KRAMER automotive in Butler Pa
love it , keep it up . expand if you can
I had exactly the same issue with my '72 . Even called them . haha WOund up bending and lowering hanger by adding to it . worked pissa
Love it , love it , love it . Haven't been able to subscribe , sucky computer . good luck
make your own connectors from 2"x3"x .062"wall . cost Ya $25.00 .
Unless you are racing you won'tsee feel the benefit of the templates . Watch UTG on youtube on port cleanup . MUCH better resultes
thanks , Iwi ll
I'm looking at U.S.Radiator as well . they need to publish the overall numbers .
First of all I want to thank "512Stroker" for sharing your experience . I learned a lot . I am experiencing the same issues with my 383 scamp ....
Moroso blue and torque 8-12 ft lbs or96 in lbs . no more
The cooler in the pics is for hose fittings . IMO hose is not good enough . Have braided steel hoses made at any good hydraulic shop a little...
The reason I upgraded to poly bushings is : My car is only used in good weather . I needed bushings that didn't need to be replaced as often ....
If you use solid lifter pushrods with hydraulic lifters the pushrods are too short and all kinds of negative stuff happens .
The front ends were redesigned in '73-'76 . The '67-'72 were (as far as I know) were all 22" except for /6 , which (as far as I know) were 16...
/6 has a 1 1/2" bottom hose connectionwhich is n.g. . Compare prices with a h.d. stock replacement vs. champion
TSR racing or A&A transmissions have the parts you need . Do not cheap out here . Good luck
IMO leave the interior until later to prevent damage . As was said , put dash in b4 windshield. Hang & fit sheet metal . weathershield next
welcome from NEW Hampshire Stay safe
problem getting on website