Separate names with a comma.
OPThe plain black painted Doug's are $400ish when using the AutoZone 20% discount avail NOW and several times a year.
=19042"]Search Results for Query: Belt sander | For A Bodies Only Mopar Forum
I read thru the whole thing, then scanned looking for a couple things.
You've been asked time and again about engine location, you always deflect...
I've had a few valves spanked by the piston for misc. reasons.Mosta them were fine.Replace the failed part, compression test, - as mentioned,...
As mentioned, your cam timing's outta whack.The Toyota engines I race now have 20 thou shims to stack on the block when the factory turbo'd...
Explosive Decompression .
Charged garden hose.
The collar at the floor is loose, when you hammered the coupler back, the column moved rearward on the plastic slides under the dash.
I always considered the steel lines as part of the cooler, - losing heat
Rubber hoses - not so much .
Neutral and Drive share the same slot/gate.
You say "about" 2.5 inches clearance .
Did you actually measure, or just guess ?
Do you have, infact, 2.7 inches that will allow the clutch fan...
Check the clearance at the top/bottom rad tank.It likely hit there, bent the blade, causing the core damage .jmo
When the fan blades pull air back, the blades move forward, especially flex fans.
The higher the rpm, - the closer the blades move toward the rad....
Homes for sale: Here are the most affordable ZIP codes in the US
Lol, I don't think there is a quantitative way to describe "how loose" they should be.So I will say, - let fear and common sense be your...
There are probably suppliers closer to you.
There is also a roller kit available, you should prob order that too, as other stuff is going to be...
I was surprised back in 71ish, when they started dropping on my face while I was pulling the clutch pedal out to go auto for racing.(It's back...
My 69 - 340 Swinger, I've had since new, has needle brgs.
IIRC Brewers lists parts nec.
Unless you have a desire to do some mohoming, after the family is gone, I recommend the rent and run scenario.If you have ideas of using it...
If one of the kids accidentally comes in contact with that hot stove . . .
8 x 8 ?
Clean your battery terminals.
It's all been said, again and again.
Just need some action.
First engine replacement as an apprentice, started it up, hi pitched squeel, mentor walked by, squirted some oil behind balancer at crank seal,...
No, the single piston calipers don't work with anything K/Hs.The K/H are a fine brake system.
If you did the job correctly, you should not have...
Put the 780 on it right away,
you have it, - do it,
- then decide .
Power booster does not improve brakes.
It merely reduces pedal effort.
You'd still have insufficient brakes for an engine upgrade.
Disk Brake Conversion Info
My son used pre-bent u-tubes, some cutting and fitting as best poss.
As with most first attempts, he'll do a few things a little different next...