Separate names with a comma.
I posted this on the other 318 build thread:Back in the 80's I blew up my good 340. Because I was in the points program I found a bone stock 73...
Back in the 80's I blew up my good 340. Because I was in the points program I found a bone stock 73 low compression 318 short block out of a...
I finally got the call last night that the title has been corrected. That is the first hurdle cleared. Now I have to figure out how to get it...
Years ago I took a drill and opened up the hole. Can't remember how much, but it worked
In this picture the firewall is original paint, and I had to respray the entire drivers side inner fender because of battery acid eating the...
I had the local paint supply mix up some paint for me and put it in rattle cans, and it worked out pretty well.
Adjusting his crotch strap???
This is the upper mount without any extender.[ATTACH]
I found a picture of the angle bracket only installed in the floor. It started life as a piece of gate hardware from the hardware store.[ATTACH]
I originally installed mine using the existing lower anchor point, but I didn't like the angle on the retractor or the belt. I like how the final...
Yes, those are the ones I used in the cuda. I ended up using an angle bracket on the floor that bolted through the double thickness seam in the...
Race only headers often do not have collector flanges to bolt up exhaust.
Great, how does it run?
16:1 box and fast ratio pitman arm? Where does that end up ratio wise?
Created some garage art from my wife's old plates[ATTACH]
Forgot you were running a midplate also. It's just that unlike a V8 the water pump kind of hangs out in mid air, and you're running a stick.
7 weeks without Timmies. That's un- Canadian.
I can't tell, is it supported by more than the water pump housing?
OK then, here's another angle.[ATTACH]
Couple of days late. I missed this on Saturday.[ATTACH]
Neat car. Join the group, I am still waiting to get my Charger from Ohio into Canada.[ATTACH]
That is my home track. Those stands are still the same.[ATTACH]
We used them back in the day to add low end torque, and yes I tried the paint trick. With new convertor technology I'm not sure if they add much.
I was going to weld up some trim holes on the rocker panels of the cuda. My plan was to use some common nails and weld the heads into the holes...
Nice job Jim
I did that on my 500 stroker. I pocket ported and port matched them and installed 2.14/1.81 stainless steel valves and new valve springs,...
Those are a thing of beauty
I simply measured at the wheel lip and evened up both sides. If the rear springs are slightly different it will affect the torsion bar adjustment.
Not exactly a car project, but finished a garage project today[ATTACH]
Gave away all my magazines, about 10 boxes, when we moved 2 years ago