Separate names with a comma.
They’re different. The one Brewer’s makes is a nice piece.
Lakewood scatter proof?
A833 with Hurst shifter
Trans is a later dodge truck one and shifter is a '69 which I believe is a "clip" in style. I was planning to just swap the whole shifter box
Is it possible to run a stock non-o/d hurst shifter with a truck o/d? I picked one up with a shifter but wanted to use my A-body handle.
You can use an undersized pilot bushing or Dakota 5-speed roller one. ARP has the correct bolts....
Can the earlier flange style tail shaft be converted to a slip yoke on a 4-speed? Thanks.
It's a plastic dummy of the trans main shaft used to line everything up to make it possible to put the trans in.
'71 B-body Pistol Grip....
Off a stick car. Just line its holes up and the one in the inner fender done by the factory to get the correct placement.
Should have a 3
Is anyone running a Hays clutch with a Street/Strip car?
What are y'all running with Street/Strip setups?
Looks like its a factory hump.
70 is way to big and will hit the dash. 71-74 non console is the best choice.
B-body ones fit also
Look at where the rods mount if the farthest to the front faces down its an OD one.
Bell housing forward will need swapped. If its from a B or E Body you will need to make a mount to relocate the shifter.
i dont know if i hear anything good enough i am going to have them make one for my car. By the amount of people at their booth it looks like they...
I the bell housings are engine color and trans is silver.