Separate names with a comma.
I like the cobras also
Perfect, That was just what I needed to see
Loctite 545 for the pipe fittings only, make sure the threads are still good after assembling and disassembling multiple times
sorry about the cat Rusty
I'm thinking of using epoxy in the "left" port to support the gasket
so should I continue to match? I will have to do surgery on the IM. Definitely not on my performer RPM, Glad Im just using these for practice,...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
It is left right . So the port divider is in #2 and #6 port
I'm doing My first gasket match etc. following @318willrun (great tutorial)
When I align my intake gasket to one of the heads the bolt holes are...
i think everyone has been cooped up too long
I could do that!!!!
Thanks for that info!!
I found the + retainers on crower sight 87063m 7* if they are compatible with the 2 groove locks Im in.
trying to find the # for the comp setup...
I also found some from Crower as suggested by Pishta. They are +050 7* I just have to find out if the are compatible with 2 groove...
So are you saying that I can use the springs as is with .480 lift?
The comp catalog calls out max lift as .49 If i can go to bind numbers then no problem
I found some on the crane sight. I have 2 groove valve stems, can I use single groove keepers?
Any links or P/N
Ill check those out , thank you!!
I have some 901-16 springs going into some stock 360 heads I am messing with
The springs call for a 1.65 installed height. I can only get 1.623...
Mopar GTX/Charger B Body Tailpipes - auto parts - by owner - vehicle...
Note: local only delivery to LA possibe or meet
Note: it is now disassembled
Dennys Driveshafts Dodge Plymouth Chrysler universal joints for your Mopar performance street car or truck muscle car or race car U-joints in...
Same as Kims
This is concerning the heads I have. 4343475A going 360 head going on a 360
I watched your 3 part you tube on mild home porting. 1...
Thanks Kimmer, looking forward to see how it runs
What is your CR? and how does it run?