Separate names with a comma.
I can break it down for shipping
Big Block engine dolly. Used once. $25.00 plus freight. Located in CT for local pickup.[ATTACH][ATTACH]
Big block Oil Pan, pickup and windage tray. Perfect for swapping B or RB into A-Body.
699 pan with Mopar Performance windage tray. $125.00 plus...
Upper and lower original rear seat out of a 1972 Dart Singer. Blue cloth/vinyl combination. Springs in great shape, no rust. Located in CT....
Complete heater assembly from a 1972 Dart. Was fully functional when removed. Heater core did not leak. Includes cables. $100.00 plus shipping....
Will they work on a 1972 Swinger for wheel well patch panels? Am in Newington, CT
Best to run manual steering
i'd do a stroker kit and remove worries about rods and crank
First thing I would do is get rid of the 3:23 and get a 3:90 posi unit. All those engine mods won't do squat unless you can rev it.
48 with no heat? That's balmy for working on a car.
Sorry to jump the thread. I need schematics for my 1972 Dart with a 440 4-speed and electronic ignition
Looking for (2) BBP steel wheels. 15 inch 8-10 inches wide with a 6-7 inch backspace for mini-tub A-Body.
I used the shims supplied with my motor mounts (shumacher and no clearance problems.
Looking for (2) 10" wide BBP steel wheels with 6" of backspace minimum. Did the spring relocation and mini-tub and need wide wheels to fit....
I have a very clean one here in Newington, CT
1 Set 1972 Dart factory hood hinges. $100.00
I have (4) sbp rally wheels, located in CT.
(4) Small Bolt Pattern Rally Rims with 2 tires.Trim rings, center caps and lug nuts includedGood condition, some scratchesLots of...
I have parts left over from a 8 3/4 BBP conversion.Standard axles with newer green bearings.
Backing Plates, Drums, Wheel Cylinders and brake...
My 72 Swinger came with the cardboard headliner. It was trashed and has been removed. Any ideas/recommendations for a replacement? Currently...
Someone has been in the paint thinner again....:angry7:
If I am following this correctly you said the clutch travel has changed. 2 areas that could be the problem: #1 The flywheels bolts were not...
There's a couple for sale on the bigblockdart.com website
Anyone have a set of SS springs to fit a 72 Dart?Located in Newington, CT
What size bolt pattern?Newington, CT
Are they small or large bolt pattern?
I use Goof-Off. Spray and let it soak in then scrape. Remove the remaining stuff with wire wheel.