Separate names with a comma.
V8 or /6? Plate number?
Coarse wrinkles not fine.
Paint on the inside are factory. This does have ball & trunnion doesn't it?
My understanding is that only the clutch style sure-grips require the friction modifier.
Thanks for sharing that.
When you don't have the manual foot pump washer, but have electric, then that hole is covered by a black rubber plug.
Had a castleated nut loosen on a dirt bike shock. Cleaned it up and used thread locker. Came loose again. This time- tightened the nut, drilled...
Well now I feel old! By your summer before you went in the Navy, I had been working in a Chrysler dealership for two years. I'm gunna take a nap.
Restore the old one! There are people that do that.
You are a sick man- and I like you for it.
Others can help, but usually there is a "lever" on the inside of each seat track. The drivers side lever is moved when you move your driver side...
As a buyer, I would be concerned about the complications with DMV. I know that registration of an out-of-state vehicle is extremely expensive.
Make your own or rob from another seat.
The factory put a reenforcing plate there to support the weak sheetmetal. It is roughly triangle shaped and is available new.
Why do you think the "burning smell" is coming from the tranny?
Looks like the surgery worked.
Has anyone ever thought of a modified freeze plug that had a pipe fitting in it for the sender?
If you have a barb fitting that screws directly into the carb body (I have never seen one), then you need to rob the proper fitting off a junk carb.
A temp sender in the upper hose measures the water temp in radiator not the engine.
Too general! What is "early" and what is "late"? What engine? Be more specific.
That carb fitting is part of the carb- why is yours missing?
Why aren't club members voting on it?
The 904 is a good tranny and can be raced with HD parts.
Thanks for the reminder of how to crimp these properly.
Others can help, but it seems six is too many. Upper two arrows w/ two non-original clips are for mounting washer bottle. Lower right hand corner...
You guys are lucky!
All good suggestions but I would start by confirming what size radiator you have (number of rows, condition, part number) since this is not an...
One trick to consider is to reduce tailpipe diameter along the gas tank.
Oh, the joys of boating! You know what the definition of a boat is?