Separate names with a comma.
do you have anymore pics of the engine after electrolysis . very impressive .
This is hands down the best but not the easiest as far as prep goes . But prep is everything with anything .
Yes We had some of them lobsters to.
Any time all you gotta do is get here I will take care of the rest .
the guy you were dealing with is probably not the guy in the picture , no doubt he hacked that guys account . sorry this happened to you .
since it is a 489 case there is a crush sleeve in there . it might be easier to take the whole center section out to work on it . or work on it...
take it back and get the guy you already paid to do the job to fix it right .
well if it is a marine Reverse rotation crank it is different than a standard rotation one . a R R crank is ground different on the rear main...
there was a batch back in the 90's with the plug in backwards , i had one it had 100 psi at idle and when i would rev it up it would balloon the...
i liked the orange best . but whatever you come up with if you have extra i would love to buy one or two if possible .
i would give it at least 2 weeks before i would jump with joy . but hopefully it's fixed .oil leaks suck i am fighting one myself .
well i have been driving old a body's for close to 40 years now with 400 to 600 hp with these old school unsafe tires . i guess i must be lucky .
if your going to spend the money to buy a new trans from the U.S. strongly consider this guy .https://www.coperacingtrans.com/
the best or my favorite converters i have purchased was an ultimate converters and turbo action and second was a Frank Lupo Dynamic converters .
my 418 small block with straight 30 has 70 psi cold , hot idle is 45 psi and hot cruse is 55 psi . i have a deep pan and regular oil pump . just...
my condolences to family and friends for such a great loss . Hang in there Paul things will slowly get better .
grounds would be my first check . bad ones can cause some weird she-ot
i am looking for the very same seat cover and color as you . with shipping , exchange rate and the tax it's works out to be 2400 bucks . i guess...
the 22-250 is an awesome gun , i love mine deadly accurate out to and past 400 yards .
nice shot by the way .
don't grind clearance on your new rockers like said it is a geometry problem .read this . B3 Racing Engines LLC - Mopar Rocker Arm Geometry Tech
anyone hear of a price on one of those babies .
Do you have the axels properly engaged ?
like kim said if you have the new style green bearings it does not matter .
Hey Jack a good balancer is good money spent you don't want this to happen again , the crank might not be as lucky next time .
we have beenwe have been asking and waiting for over 2 years now . the 20 to 1 box will sell big time .
i don't care much for shipwrecks either , 36 years in the inshore and offshore winter fishery .
RAMM is an expert and he don't blow smoke out his ass . his work is done with surgical precision and he stands by it .
built like a tank .... back when craftsmen took pride in there work .