Separate names with a comma.
On my 71' grill I had to repaint the Black as it was severely weathered. Cleaned it up and shot the Black first then the Silver and then clear...
I can't remember where I got this bracket/bushing kit, but it's a little different than what's been show in this thread.[ATTACH]
Here you go![ATTACH]
I thought about replacing the 24:1 box on my dart with the PST 16:1 box, does anyone have a working promo code for PST?
Can the box be removed...
Grant version of the Tuff Wheel.[ATTACH]
I like the idea, never dealt with any 3D printed items, but it looks like clean up would be a chore on this.
Now what about the older 67-71 dash...
I only mentioned that because mine leaked and ruined the new paint on my inner fender.
Northern Radiator is what I run with my 383 and it keeps it cool with a 22" wide Radiator.
Looks good, but I hope your running the newer brake fluid that doesn't eat paint as those cast iron master cylinders tend to leak!
Great story! I'm glad you shared this experience with the previous owner, your one classy Mopar enthusiast!
What would be the "ideal stall range" for my set up? I have ordered the parts, but they can be returned.
I was interested in hearing what PTC had to offer, but all they did was send me a reply saying they had a TC for my set up. I e-mailed them back...
The previous trans was a stock rebuild/stock TC, with no shift kit so I will have now have the chance to see for my self the difference between...
Agreed Rusty, I have always gotten great advice and tips here.
After 3 nights of banging my head on the keyboard searching for a converter, I finally just decided to go all TCI to try and preserve any hope of...
I filled out their online spec sheet, but i'm not looking to spend over $250 on a TC and I doubt theirs will be in that range.
I found this chart on the webFactory ConvertersEngine ................ Diameter ............. Stall-Rate
* 225 ...................... 10.75"...
Here's my brackets and how I have them mounted.[ATTACH]
That car has been on ebay for several months, no takers yet!
PM me with your prices, I just need one.
Looking a complete automatic carburetor linkage stud for a 4 barrel carb.[ATTACH]
Andy, I went through all my photos looking just for that, but none of the trans end of the crank were taken.
Thanks Max! This was a motor out of a C-body with an automatic trans, when I had the trans rebuilt, the shop sent me a neutral balanced converter,...
Searching the forums here and found this photo in which it talks about 383-400-440 cast crank motors, which this
motor has a cast crank.[ATTACH]...
OK, here is what's confusing, the block has casting numbers of a 71' 383, Was there ever an externally balanced 383?[ATTACH]
Is this harmonic balancer for a externally balanced crank?[ATTACH]
This used be a major cruise back in the day here in Independence, MO., but got shut down by the city in the late 80's early 90's. Now it's been...
Get a wooden dowel rod and place one end to your ear and the other end in various locations on the engine to try and narrow down where the source is.
So am I the kit can be wired to a gps receiver!
I just put in an intellitronix 6 guage unversal kit in my 71' Dart and love it.[ATTACH]