Separate names with a comma.
Everybody falls and hits the head on occasion.
I'm sure the Chrysler engineers didn't have a clue.[ATTACH]
And this is how the great Holley Edelbrock debate started. :)
Blah Blah Blah
Let me know when you want to line your 2 tenths up.
That's what happens when you never make it past 6th grade.
Yes and No.If the kd rod along the firewall has an adjuster, ( which I believe I can see on the posters car)you do not need the rod at the carb...
The rod you have in your pic is not the same one in my pic.
I tried helping you with a pic, the correct rod to get, and my experience, but you...
The adjustable kd rod along the firewall to the 904 trans is all stock 318 linkage. Throttle cable bracket is a 340 4bbl bracket. The non...
Little 411 for you.
The kd rod at the carburetor, does not need to be adjustable.
As long as the rod along the firewall is adjustable, you are...
Ah-Ha.... I see.
I agree, the factory SB position of the fuel filter isn't the best place in my opinion, it gets a lot of heat off the motor. I like...
I don't see where or the word Hate was used in this discussion towards you ? Nobody hates you or your opinion. I just disagree with your opinion....
$15 for general admission ? Hopefully the club wont be asking for that if the show ever gets back to Woodley.
The fuel filter does not have zip ties, it has factory fuel line clamps. The pcv valve and hose are in the factory position.
Even the throttle...
I just like the name "Heather Storm". Perfect adult entertainment name. :rolleyes:
The Street Avenger is one of the worst carbs Holley ever built. Google flaking zinc coating. I would look for something different.
Good luck !
Following the sheep with a mask.
Google 340 throttle return spring.
Good God, Can you stop with my motor already ?
All the correct parts are available for less than $100.
Why go through all the trouble and money to stroke out a motor, only to...
Welcome to hot-rodding. If you are going to count your penny's, get out while you are alive. If you want to save some money, don't buy retail....
That, and its Free !!!!!!
Nothing to lose here. Lol
Depends who you ask. I'm not a fan of Pertronix. I consider it a bubble gum ignition. I like the Chrysler electronic ignition.
Millions of miles...
At this rate...1 million dollars.
Bad timing on my part to start this 800 thread.
I have so much stuff going on, time is scarce. On top of that, 110deg days in Cali, make for...
Mopar "H" bolts for me.[ATTACH]Get Real Get Mopar !!!!
Steele Rubber or Soff Seal.
I haven't fine tuned the 800. To this point the actual best carb for my car is the Ede 650, like I stated earlier in my thread.