Separate names with a comma.
You nailed it lots of off-shore junk also sold in the US , he could have done everything spot on and still this happened.
Factory smog era camshaft that wiped out ![ATTACH][ATTACH]
Just went thru similar ordeal on a newly purchased Dodge 886
Low miles under 40 thousand engine popped as u throttled it up
Well after removing...
Why not call [ Racer Brown ] get one made EXACTLY for what you have versus what someone has on the shelf etc !
2pm to 7 pm Jim @ 410-866-7660
It eliminated my issue on old Dual port !
Mongo very HAPPY[ATTACH]
PS - we use the material on water valves up to 48" at work with over 200 psi in some areas and yes torque setting much higher on t-head bolts but...
Very but like I said put 170 miles on mine last night ZERO leaks
PS - I guess my inch pounds t wrench is loaned out because its missing in action...
Put 170 miles on it after 11pm last night driving to NC house
No leaks ![ATTACH][ATTACH]
Good plan we have some also at work to make gaskets for flange valves for water mains etc !
I like how clean the look is also
Thank you Sir , put gasket in today and zero leaks like u said requires very littWithout a doubt the best water neck gasket I ever seen !!!...
Offy is live and well still doing it the old school way call them if you cant obtain one used .
I had one made for a 401 AMC with 4500 top and a...
Ten 4 - I have a few on the way
Heck - I will try to find one or two to hort up for future etc !
Last attempt FYI
Ran in driveway 20 mins drove up and down highway near my house atleast 15 miles then came home checked it and dry ### was like...
Such a simple process but sometimes it drives us CRAZY
Thank you very much
Spent almost $30 on Right Stuff black stuff yesterday crazy how stuff works , I also like the fact of Zero rtv on it clean...
I used some [Right Stuff] and still weeps !
Driving me crazy
Nice vintage intake thanks for the images etc !
Always good seeing some old stuff.
Keep having a small leak on newly installed Offy dual port intake with new cast alum waterneck !!!
Been buying felpro from local parts store with...
Running these intake was port matched/ I will drill additional holes to match new pattern.[ATTACH][ATTACH]
Yes I guess so
He was just showing new bolt pattern
I had a few sets of those W2 gaskets luckily I saved a set and used for template after Reg LA holes were welded up .
Thank you Sir - I hope its competitive
Super Stock class [ Southeast Gassers ] dual plane only allowed !
Believe me I wish we allowed a single plane unit also .
I didn't use this because of an article , I did because of class rules etc .
I can afford any intake made but when it comes to dual planes the [...
Thank you - Jerry is pretty talented
Direct Connection heads
Probably right !
I have another small block going in but will save me 273Yes sir
I will keep original motor
I have another...