Separate names with a comma.
Kim, that's twice this month! You gota thing going on with a nurse?
And here's what you do with the left over stock low compression 340 Mopar pistons; bore the 352 out .040, hone the 352 con rod bushing an...
The stock piston choices can be a real mixed bag too! Stock pistons will have what a person would think is the cubic inch of the engine cast on...
The valve spring that was used has an inner dampener on it, that dampener is chewing the groove, why, see post 2,3 and 4.
What is the crank? Cast or steel?
Just me being curious, the thread pitch looks like it's for 20 / INCH as opposed to 13/ inch, am I seeing things or what?
First pic drivers side, second pass side, third 318 in frame BUT that's a '75 frame. [ATTACH] [ATTACH] [ATTACH]
There is multiple mount holes in the actual frame that will accept different engine positions! I can take a photo in the morning of a bare freshly...
I don't think I'll be running out and snapping up more equipment that's going to sit in a corner, for the few applications that it would...
Depends on your meaning of "converting". That is a replacement bushing for a rod which originally was prepped to have a bushing, Unless you intend...
Hellrats, it has nothing to do with weight correction, follow toolmanmike's lead!
Pink insulation maybe?
Well there you have it! Zoom in on the part #'s of engintechs top gear and it's got both the "S402", this fits an LA and it's also stamped "S296"...
What were you sold as a gear set? IF the top gear is for a POLY engine they are market exactly 1 tooth off, in comparison to an LA! This could...
Mopar Performance Camshaft installation sheet, printed in 03 21 2011 says 110 intake center line.
Set it back in an engine block with #1,3 and 5 main bearing and try and dial indicate it that way.
360 ,(Non magnum), 19.79 inch/ ounce, 383, 400 440 cast crank 12.9 inch/ ounce, 440 heavy rod 6.5 inch/ ounce and the 340 cast crank is 4.22 inch/...
What diameters of cutters did you make?
Another version of the balancer-less industrial offerings, 1968 318.
I like them too! but.. this I won't fix ,pic 1, and yes some can be fixed. A hard seat will be installed after the surgery on the survivor!...
Late last night a "Newbi" responded to the post, I'll call it "post 72 and a half", some of uzzz saw it! Obviously now it's missing, gone, erased,...
I've seen 1, 2 and 3 but not all 8, We have a winner there!
Interesting to see what was involved to make a 2.02 fit.
Click on the blue arrow, read these posts.
That one on the right is NOT a cam plug, what year of a block do you have?
Helped a shop clean out their shed, place was for sale, this and more was destined to be scrap, I have a sea can, so it's all saved. Anyone local...
These guys offer stuff too.
And the head bolt holes are also canted, It is correct.
Do you need the big end and small end weight or just the total weight?
Total rod weights of stuff hanging on the rack : 745.4g, onward up to 759.5g
There it is! the one on the bottom. A pecker head!