Separate names with a comma.
The top picture looks like a vacuum secondary Holley carb. Not that there is anything wrong with that but you need to know what you are working...
Are the rollers turning when you hit the trigger?
Maybe you have to adjust the tension?
I have both sets. I am thinking that the one on the right/bottom is the correct one.
[ATTACH] Which float is correct?
I just found out that some were made upside down and then discovered that I have both.
I am guessing that it passed?
How much to ship to Guelph Ontario CA. ?
Weld appears to be for the coolant passage? Sounds like this intake hasn't been used since the repair?...
Mine is a GT?
I still have the fiber board.
I see why this stuff is missing!
Such a pain in the ass to reassemble!
Thank you for the diagrams!!!
How do I save it for a file?
Thank you for the quick response!
Can anyone tell me the order of the hook and base plate and tire orientation for a 67 dart.
I have the jack and tire iron on the right side with...
I hear you on how the money adds up in a big hurry!
How much for a junkyard engine?
I know that in some places they are worth a small fortune...
How much money is it to bore a hole out your way?
I am just think that you are spending too much on the small things and that you need to...
2200 stall with 3:55 gears.
It was a slug off the line.
Stock 68 block .030 over 71 J heads with 2.02 valves. Wouldn't make good power until 2500 rpm then it came in .
I didn't like it as I want a...
Just got through reading this thread.
Alot of great information. I had the xe268 in my "stock "340 and didn't like the soft bottom end. After...
Can you post a picture of the top of the carb ?
Is it possible that it is missing?
I have worked on that type of carb, the secondary air valve just kinda "sits in there "
Seems odd to me?
I believe that you need the secondary weighted butterfly valve, I have never seen one before that does not have them .
That would explain your...
Your welcome! I have had a lot of help from this forum, it is nice to be able to help someone else.
The sensor go's between the two front intake bolts left side of your picture.
It seems that everything comes in three's.
Might want to wait before the restoration.
I think that you could push start with a rear pump. ?
Not sure about rare, but desirable.
It has all the options that people look for.
Do you know how old the battery is?
Up here in Canada, I don't trust them after 5 year's.
But I have seen some go for 8 years.
Just a thought.
I will. Probably won't be able to for a few days .
My thought is that if I can make it better while I am at this stage, why not.
Thank you sir.
I think that is what I am going to do seems that it is accessible now .
I haven't put the timing set on yet .
So it would be easy to drill a hole in the plate.
How big of a hole would you recommend?