Search results for query: *

Purchased these for a project but going another route. All 4 are 14x6, someone painted the centers. What you see is what I have, they do not come with center caps. Price is $300obo Located near Bedford, IN and wouldn't like to ship at this time.

Those with DC spoilers, have you found a good way to mount them without them cracking over time? Last two were put on with normal rivets and eventually would crack around the tabs. I thought about using plastic ones like they originally came with or a rivet nut and bolt with a rubber washer and...

Decent pair of manifolds with a 7/73 casting date Price is $250 Located near Bedford, Indiana (47264) Ideally don't want to ship them at this time but I can bring them along to the Indy cylinder head swap meet in Indy coming up.

Looking to purchase both to convert a later car, ideally in Southern Indiana or able to ship. Can also pick up at the Indy swap meet coming up. Photo is for reference

Looking to purchase a good useable top off of a Duster, Demon or Dart Sport around Southern, IN.

Some probably recall this car, we bought it some time back. In 2016 it ended up being rolled over, decided to finally pull it out and fix the body on it. Once getting the carpet out found out the floors were pretty much gone.

Looking to see if someone close to Southern IN may have a AMD floor pan for a Duster sitting around from an abandoned project before I order one.

As the title states looking to purchase a set of 1.6 rockers for an LA head small block, ideally Crane/Mopar performance but would consider others. If you're near Indiana (47264) even better so I could just pick them up. Thanks. Photo for reference.

I do not own this but it is for sale locally and I have the contact info for serious buyers. Most know this car, Tony's '67 has come up for sale. Factory slant car but now has a 360 (.060" over), auto and 8 3/4 rear. Black with Red interior ('67 pattern but '69 color). Here is the resto...

Looking to purchase a GTS/Swinger 340 hood in/around Indiana to try and save on shipping costs. I don't need the call outs or trim. Photo for reference

Prefer a 4 door but will take a 2 door at this point. I don't need an engine/trans or most of the interior. Rust doesn't matter either. Within a couple hours of 47264 ideally.

I've done some searching but nothing has gave me much of an answer on this. What would be the correct black paint to use for this panel? I would assume organisol like other tail light panels but I've been wrong before. I figure it's probably the same for the black on the grill as well?

Went ahead and attached pics of his most known/posted cars. He bought the Duster new in '71 and has had the '68 Barracuda for 20 years or so. Charles "Charlie" Alvin Banister - View Obituary & Service Information

New in box Comp Cams CL20-671-4, nostalgia plus hydraulic flat tappet. It was purchased for another project just changed directions. specs can be found here Nostalgia Plus 239/246 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360 Price is $250 Located in Southern, Indiana 47264. Prefer...

I recall seeing posts from time to time on people looking for stencil kits (mostly '70 swinger), came across these while hunting something else. They also have Duster, Demon, Dart Sport, Barracuda and some '68-'69 Dart ones as well. 1970 thru 1972 Dodge Dart Bumble Bee Stripe - Stencils And...

Location is Norman, IN 47264. Prefer not to ship since it'd probably be expensive. Price is $350obo Front is 15x7 with 4.25” bs Rear is 15x8 with 4.625” bs. They come with ‘72+ caps They have some rust but has always been there since I bought them. They are best suited for a driver car.

‘71 Duster roller. Factory 198/3-speed car. FY1 yellow with black interior. Have trim, wiring, bumpers, seats etc. No title, $900. Located in Norman, IN 47264.

With my Scamp nearing completion I decided to pick up a Duster. It started life July 6, 1971 as a FY1 Lemon Twist with a black interior Slant 6 car backed by a floor shifted 3-speed. Needs some metal work but not bad for an Indiana car.

After nearly 4 years I can call this thing nearly done. After a long vacation from the site I'm back, not as regular as before but oh well.

Located in Norman, IN 47264 Price is $11,500 All numbers match. Engine- 318 STD bore, fresh rebuild. 600cfm Slayer a top an Edelbrock Performer RPM intake, small cam. Trans- 904, 400 miles on stock rebuild. Rear end- 8.25 with 2.45s. Suspension- stock suspension with new shocks. Wheels-...

I was running an edelbrock and my stock throttle set up bolted right on and worked ('74 Scamp 318 2bbl car). I went to a QuickFuel 600cfm and nothing will reach, I was wondering what everyone else done to solve the issue? I buddy said to go to a lokar set up but can't find one for a SB.

Is it possible to run a stock non-o/d hurst shifter with a truck o/d? I picked one up with a shifter but wanted to use my A-body handle.

I was driving the duster home tonight and made a right hand turn (same side I smashed in the roll) and heard a loud pop that went all through the front suspension and now it acts like it has no power steering. Nothing seemed loose, power steering is full and belt is still on. Maybe something is...

I was driving home tonight and rolled the Duster 2-3 times into a creek. It looks like I can save it but morning will tell. I always considered the site my extended family so I thought I'd let everyone know. I'll start on it once my Scamp is done.

Found these for $300 if anyone is needing a set, http://phoenix.craigslist.org/nph/pts/5358223123.html NOT MINE

Anyone have a set of Rallye mirrors that are paintable? Shipping would be to 47264.

Sending to the scrap yard in a few weeks, anyone need anything? Already pulled the slant and BBP parts.

Anyone been successful at pulling drip rail trim off and putting it back on? I looked at mine and can't figure out a good way to remove it for paint. Thanks

I looked all over and couldn't really find pics of what I'm wanting. Anyone that is running D453s have a pic of the k-frame straight on showing how much they hang down? I'm thinking of getting a set but don't want something I'll be beating off of roads, railroad tracks, speed bumps ect. I know...

Teenage girl flew into a parking spot and then proceeded to throw it into Reverse and take out the fender/bumper and possibly hood. Fresh paint and stripes back in January.