Search results for query: *

hi all, It's been a long time since ive been on here and finally cleaning my garage. I discovered I have a few leftovers from my 67 dart GT project when I had picked up a 76 Swinger parts car. I have the following: - unbroken OEM rear glass from the 76 swinger - front and rear bumpers...

any offers? please let me know if my pricing is way out in left field. just going by what i have in and what i can expect it needs. thanks everyone!

thanks Adam - sorry if i put the wrong info. and i do like mustangs but need either cashola or a truck!! but thanks for the offers! - jason

asking 5700 or best offer. Just outside Boston mass zip 01867. lots of pics here: http://www.cyclehaul.com/forsale/dartindex.html 2nd kid is coming and i need to sort out the toys and priorities. I love the car but at this time in my life i think i need to cut back some things and i need...

hi all, ill get some pics this weekend. the seats are black and from the 76 swinger. very good shape. from the 67 i just have the stock k frame and spindles, original 4 bolt wheels and a set of aftermarket 4 bolt pattern wheels. also have the /6 drivtrain and driveshaft, torsion bars, etc...

hey all i know its been a while well i acquired a 55 buick w/ a 364 nailhead last fall so i need to free up some space and some cash. not looking to make a ton and truthfully most of this will go to the scrappers if i cant get rid of it. i hate to do that but i am out of space. i am trying to...

nope wasnt - BUT if i do keep her silver IS the color i am going with lol!

finally found a running 322 nailhead for that after months and months of searching!! it's a 55 special 4 door. has a never mounted original full size spare and 2 extra dynaflows. it isn't the prettiest thing right now but i hope to get it on the road for spring unless it finds a new home. ive...

thanks cudamark. i guess this is the learning process as i am not sure why someone would want antiquated stuff like extremely sagged leaf springs and a broken power steering box just to preserve originality? not being sarcastic at all. my theory has salways been if i cant use something, i...

thanks badlilred - if the dakota was a 49 i'd do it!

thanks all and no offense taken at the "less optimistic" values. i am a realist and understand that i am most likely not going to get all the cash back. esp amongst those who know their MOPARS - and i am not into trying to swindle anyone. May i ask what appears to not be original? My intent...

sorry duh - i didnt list what i'd done: mildly warmed-up 318 with edelbrock carb and intake, summit headers. also have the original complete /6 drivetrain that is in perfect working order. i swapped the drivetrain last summer for a more muscle car style and kept the /6 setup in a clean and dry...

well i just dont know what to do. i like the Dart and am proud of my work with it. because i only got into cars about 5 or so years ago and so i never had a single car that i HAD to have. but since then i have been leaning towards a mid 50's-early 60's pickup but i can't have both. i have...

well got the gas tank back in, redid the exhaust, now finally getting to installing the new leaf springs this week. once done i'll finally post some pics. i cant drive it the way it is as its just too low for our roads. suspension is gone in the back so just bit the bullet and got the old...

got the tank fitted i had the car up on 1 jack stand and i think the gas wasnt near the outlet. dropped the car down and she fired up. saved myself 60 bucks!

to start the car? i idiotically routed my exhaust too close to the gas stank and burned holes in the tank. i dropped the tank and realized i had a tank from a 76. i got it to fit in there and put the filler neck on, reconnected the sending unit wire. added 1 gallon (it was completely...

heh sorry all - i ended up being a moron and put the damn pipe too close to the gas tank. now the tank has 3 holes due to the pipes heating it and then bashing it on out crappy roads. so now i need to pull the tank and get it sealed. ugh. anyway i used the stock 210$ kit from summit. no...

what a difference!! with my brother in law's help and a new air compressor and impact wrench, took just over 2 hours to install the complete setup from summit. with shipping etc the total cost was about 250 for the kit. may be a bit subdued sound for some folks but i wanted to get quieter...

thanks Dan - are those summit kits fairly straight to bolt -in or do you assume that they are "just the basics" and a lot of fab will need to be done? I ask because if i am just paying for the mufflers and the rest will need to be fabbed, i may just buy the pieces seperately. if the kit gets...

well as some of you may recall my 67 dart had a "creaking" sound anytime i hit a bump. well turned out part of the issue was a loose caliper on the drivers wheel. well i was still getting a weird creaking/grinding sound from the drivers side when i hit a bump and it freaked me out. i didnt...

thanks everyone!! i fully boxed the torsion bar area so i cant see it coming undone but i am ordering some leaf springs anyway so while i am under there i'll look everything over again. thanks all!

GOT IT FIXED!!!!!!!!!!!!!!!!!!!!!!!! my mechanic - andy at superior auto in reading, ma - and i went for a quick ride. come back and he says -" did you notice it wasnt as loud on the way back? i noticed that when i applied the brake, the noise stopped". so we put it up on his lift and pulled...

lol yeah - i had another thread going about it. basically there is an awful crunching sound going over any bump - coming from the drivers side right beneath the floorboard. i boxed in the rotted torsion bar support and it didnt make a single bit of difference - cept now i swear i feel the...

i HOPE and PRAY i dont have a cracked frame!!!!

i am about to add some gasoline to the car and toss a match at it. i just finished boxing in the tosion bar area and it made ZERO difference. if anything the crunching sound is worse. put the wheels up and tried to shake them to see if i had any bearing movement. they seem fine to me and...

thanks all - will have another go at it! stinks to not drive it but i am learning a lot and having fun welding. tho i wont be on monster garage anytime soon with my welds!

i didnt remove the torsion bar during this process. also the noise started maybe 2 months ago out of nowhere. i can see that the exhaust can rub on the frame at times so to test things i removed the exhaust from the header back (so no way for exhaust to hit the frame) and went for a short...

hey guys well after ffrying my starter relay while welding in some support plates at the torsion bar on drivers side, i took the car for a test drive, the crunching when hitting a bump is marginally better but still very prevalent. i only boxed 2 /3 rds of the torsion bar area so i will do the...

fixed it!!! got the new starter relay in, redid the wiring to/from the starter, dbl checked all grounds and tightened things up a bit. turned the key and she fred right up! fortunately was only a $13 fix but a VERY valuable lesson learned!! oh and it would have been an hour or 2 to get the...

well turns out the starter is fine - ugh 3 plus hours wasted, but oh well time is "free" right lol! ordered up a new starter relay for 12 bucks. will be here today and try that. sheesh all cos i didnt undo the battery. that drives me nuts - simple preventative measures can save...