Search results for query: *

Does anyone know if the seal on the back edge of the door glass is available aftermarket? It’s where the door glass meets the quarter window. I circled where it goes in the picture. I tried looking but can’t find anyone that is selling it.

I'm not sure if this has been posted before but after watching the video I found it quit impressive and this build uses the Dutra duals which is what I used. WILD SLANT SIX - 225 Chrysler Build and Dyno | Iconic Engine Series - YouTube

Could someone post some pics of the door end seals on an early A Cuda or a early A body. I took my car apart over 5 years ago and even with the notes and pictures I took I can't figure out what screws hold what pieces in place. I have posted some pics for the parts of the car I need help with...

I found the correct hood bumpers for the early A cars. Part number metro HF 19-G at rock auto for 2.92 each. These are not like the wrong ones supplied by mega parts. My original one is on the far left and the Metro HF 19-G is the middle one and the one supplied by Mega parts is on the right...

Has anyone on here tried the Masterpro power steer Box, 1969 Vailiant w 318 is what I'm thinking of putting it in. It's priced really right at 109 remanufactured and it shows it can replace the Mopar PS box. Shows it's slightly smaller in size but not as small as the borgenson box. I'm wondering...

@65 Dartman Don send me some Spear clips for my 65 Barracuda and he shipped them for postage only and received them yesterday. Exactly what I needed. Perfectly wrapped and I want to say a Big Thanks to Don!

Does anyone know where to get some 64 or 65 barracuda spear clips? I need the end clip which has a speed nut on it and 4 of the clip in ones. Or anything that can work in the original clips place. I’ve looked at reproduction clips but doesn’t look like anyone remakes them.

Does anyone know were to purchase the 2 stud early A trans mount? I've looked at a few parts places and they all show the later style mount. :thankyou:

Does any one know where to buy the new recall guide for the 5.7. Dam I tried to google it and all I can find is guides with chain included and all I want is the new aluminum guide as I have a new chain with the all plastic guide. Thanks

Anyone know what happened to the early A-body forum? I know a lot of the people that are on there are also on FABO. This was the link. http://www.earlyabodyforum.com

Here is a link that you look at old brochures of Most American cars back to the early 1900 With Dodge, Plymouth and Chrysler. Lots of others too. http://www.lov2xlr8.no/broch1.html

Watch and enjoy. https://www.youtube.com/watch?x-yt-ts=1421914688&v=6AixopQt1y8&x-yt-cl=84503534#t=15

Anybody on here install the Dillinger lower rad support. Mine is for an early A but I'm sure the kit fits the same for early and late. Pictures of removing the old and installing the new rad support would be great. I'm just wondering how much to remove and what the 2 odd shape plates are for...

awesome article, but over 13 - 1 comp with efi http://www.moparmusclemagazine.com/techarticles/mopp_0602_chrysler_slant_six_engine/viewall.html

I was wondering if there are any decent forums for the LX cars. I have a 300 SRT8 and was wondering about tire fitment. The 300 came with 245 45R20's and was thinking about going to a 265 40 20. I don't think there would be any trouble stepping up a bit wider, but I have made that mistake...

Can any one on here recommend a ODB tool to retrieve fault codes from a 2005 Chrysler 300C My brother bough a 300 that was in a front accident and we have the car repaired, but the esp light is on and I have 2 different scanners and neither one can scan this car for esp faults. I have a...

You FABO guys that have ordered from Harbour freight from Canada, how did you order? I tried to order over the phone and the lady told me all international orders have to be emailed in, so I did. Now just over a week has gone buy and still havn't heard anything. I ordered on Feb 20th. :wack...

I'm looking at having the radio in the Demon converted to am/fm with 180 watts. Maybe there are some kits out there to buy and install it yourself. Has anybody on here had it done and are they happy with it? I'd like to find a place in Canada if possible, just to save shipping it across...

I just saw in Mopar Muscle that TTI now makes a 1 7/8 tube size A body small block header. This will be good for the large cube small block guys.

Dam I just read this on allpar, All I can say is I hope this isn't true. According to Reuters, Arthur Gonzalez, one of the nation’s most experienced bankruptcy judges, will oversee the bankruptcy proceedings for Chrysler. He handled both Enron and WorldCom’s bankruptcies simultaneously...

I just tried a 265 40R17 on my 65 Cuda, and it fits in the stock wheel well with no rubbing, however I havn't driven the car. I jacked it up on all angles and put a ton of weight in the trunk to get them to make contact with the body but no way. The wheel wells are all stock with the springs...

Here is the new Chrysler for you Cuda guys.

Here is the count down to the Challenger. http://www.dodgechallengercountdown.com

Any one here know what happened to the http://www.earlyabodyforum.com its been down for a week or more! :shaking2:

Is anyone here using a sway bar on an A body that has the springs moved in via a spring relocation kit. I would like to use a 1 inch bar that is about 31 or 32 inches wide. The sway bar that is made for the Car is 34 inches wide and bottoms out on the frame. This sway bar that I have now is 34...

When you guys installed your Yukon Axle's in a 8 3/4 rear, did you have to remove the centering peice in the carrier. (The peice that floats around that lets you set the axle end play) I went to put the axles with new green bearings in today and its like I can't quite get the axles pushed in far...

Here is alink I found that you can write to Dodge and let them know you want a Challenger. Lets get writing...

Hello all, Just joined and what a Great site, Good to see a all A bodies Forum. But if its a MOPAR I Love it! From Calgary AB Canada. www.moparmagic.net