Search results for query: *

Okay these are driver quality have some dents and scratches would need full resto for show car but hey the are almost 50 years old. The are listed on Ebay for 495 free shipping if some one here wants them Ill let them go for 450 free shipping ground in the USA lower states.

Hey good luck hope it run right for you.:cheers::cheers::cheers::cheers:

CalleD MAXIFUSE here is a picture of the fuse. Holder is 10 gauge wire and a nice Rubber Clam Shell bought them at Oreileys.

Oil pan of a 904 is square with one corner missing. 727 is very irregular here are the pictures of each. First is 904 Second is 727 :wav:

Okay well I removed the MSD from the car and its now running fine on the stock ECU so its off to MSD for repair or replacement. Also for the old wiring sake I in stalled 10 gauge feed from the alternator directly to the battery through its own 80 amp mega fuse. Im now using a voltage monitor...

Okay so i bought a test light and 5 blade fuses first i unplugged the alternator no change then the starter no change then all 5 bulk head connecters then I used the test light and still found draw on the blade fuse replacement for the fusible link. My MSD box that was installed in January was...

Replace it with stock rebuild 78 amp wanted the 120 but they needed to order it. My buddy said to remove the power lug from the alternator and test from the lug to a ground with the Ohm meter if its grounding from there its a dead short. So i will try that monday. With the key off and I replace...

Hey I want it if shipping is not to high... Herriman Utah 84096 let me know. Also looking for 76 gauge assembly and bezel. Make sure it has foam on both sides inside box for shipping PLZ.

Okay so driving the Feather Duster in traffic and fusable link from Pos battery to relay blows. My buddy says alternator may be the cause. Any advise on how to chase is down the short alternator was replaced a month ago so its under warenty. :banghead::banghead::banghead:

Think the numbers read 6EE 2085 or 6EE 2885

Okay here are pictures of the switch I need. The little tab that moves the switch inside broke off so for now Im just un plugging the switch when the car gets hot.

Check shipping to 90731 should be 5 buck if you use USPS\first class 40 shipped and we have a deal I really only need the blower switch but hey.

Hey I need a blower switch only not the complete controls or bezel. Would like to pay 10 bucks plus shipping. Here is a picture. Im in california 90731. So only the blower switch top picture working one would be great. Mine broke after replacing the heater core went to flip blower switch and it...

Electrical switch here is a picture.

Ill give you 30 plus shipping.

Could you take a better picture of the front right side up. Interested but.

So I scraped and washed it for an hour then I poured WD40 on it as I shifter. After considerable washing shifting and very liberal applications of WD40 it shifts like a dream. Sorry no after photos though.

Well as for the Transmission it really shifting bad so I decided to adjust the shifter. Here are the Pictures of what I found.

Under the so called repairs. Well it,s a dent about 1/2 inch deep no rust and I own a spitznegl gun so should be easy to get out I may just cut it out with thin wheel straigten it perfect then stitch back to perfect. Was a very bad bondo cover up they did not even remove paint before the bondo...

76 Feather Duster sorry for lack of info.

Where can I get a heater switch I need one bad.:oops::oops::oops:

So when i went to leave work i pulled the PCV out of the valve cover it could suck a golf ball through a garden hose. Okay lets just say very strong suction. So in the morning its getting a spark plug boot. I am still convinced the head gasket is going so leak down test saturday. Followed by the...

Okay I give leak down test on Saturday . As for the money my friend owns a machine shop he has a 225 industrial head and valve cover with head and valve cover gasket sitting in his shop 100 for them. It has been surfaced and new guides and a fresh valve job. The customer he did it up for...

Good Idea never though of that. With all the rest of the crap stuck every where on this car the carb vent is a good possibility.:D

Today once i was at work i checked the oil. A tiny bit of oily grey goop on the stick with lots of nice clean oil.. Now saturday I will pull the head and replace with a rebuilt ready to rock head and new head gasket. Yes I agree obviously the oil changes were not done often or the guy was a...

Well today after i got to work there was a tiny bite of grey water oil goop on dip stick with mostly good oil on the rest. Now Im leaning toward head gasket failing. So saturday off comes the head and on goes another rebuilt surfaced one thats all ready to go. Wish I had time to get a ARP head...

So every 3 days i have to disconnect the fuel filter and let the crude drain out. Big chunks of white crude oh well it may all be out in a few months of driving.??? Sure and the stupid Chinees sending unit reads empty when only 7 gallons have been burned.:mumum: Thats what I get for not buying...

Okay well today I installed the MSD blasterII coil from my GLHS shelby need to install new engine and tranny in the GLHS so I figuered the coil was up for grabs. Stupid coil was DOA Now my car has and Accell crome coil only one they had at the parts store at 900 pm at night. Any one...

No I still need one most have broken mounting tabs or missing ribs. I am not making a show car but want a grill thats in tack to repaint my self.

Think I will do a compression check on saturday and see in the mean time Ill try the rubber hose and clamp trick. Its very anoying to walk up to the car to go home from work and see the new oil leaks I park in a different spot most days. As for the PCV hose its new and fuel injection hose very...