Search results for query: *

Some pictures of recent winter boredom mod I did . Not for everybody , but figured I would post . Slanted radiator mount with ducting going through the hood

Ok so it’s been like 2+ years since I worked on my car .I feel like I forgot everything . Car has a 360 , 30 over , small cam , aluminum heads , No vacuum advance distributor , nothing special . I’m confused about timing my car . This might sound so stupid to you all ! But here it goes...

hey guys wondering if anybody can help me out ? Does anybody know the sizes of tthe brake line fittings that go into the distribution block . I pretty much just need the sizes of fittings that run from the master cylinder to the distribution block ! It seems that they are bigger Don't mind...

Probably a stupid question haha . So I've welded on a ton of cars before mostly modern ones . Always remove the ecu before welding . I've welded on my dart and didint remove anything . But now thinking about it ,should the mopar orange box be removed before welding on a old mopar ? Doing some...

Hey guys , so I put in a new motor in my dart . It's 1978 360 with Mopar aluminum heads , about 9to 1 compression , comp cam Extreme energy 256 intake 268 exhsust . Stock ignition with orange box and msd coil , hooker comp headers and a holley street avenger carb . I need to time it because it's...

Hey guys quick question . Could I run the pcv of the back port on my intake manifold instead of the carb ???

hey guys, i know some of you did this mod. I wanna reinforce my k member and also , cut it up and be able to fit bigger oil pans in and gain some clearance. So now my motor is out and my k member i still in the car . Do you think this mod would be done better when the k member is in the car or...

Hey guys , so finally I'm buying a 360 for my car . Going to pick it up tomorrow . This engine comes out of a 1979 ramcharger . I'm gonna put it in my 1973 Dodge Dart . My questions are? 1. Do I need a new oil pan because this motor is out of a truck ? 2. Will the motor mounts out of the...

Hey guys does anybody have the fast ratio Pittman and idler arm on their small block a body ? And does any body know what headers/ manifolds they work with ? ???? . Any info would be greatly appreciated ? Thank you Peter

Hey guys . So I got the firm feel stage 3 box in my car and the federal power steering pump . I'm not liking the pump it feels way over boosted . I'm wondering which ps pump to buy , I've seen people with jeep pumps , circle track pumps , saginawa type 2 pumps etc..... I have no idea what box...

Hey guys , so I'm gonna be putting a fuel cell with AN fittings and AN hose in my dart . I had a quick questin thou . The cell has -8 AN return fittings . So now my question I should I run a -8AN line and fittings or should I go smaller like -6 AN fittings and line ???? This is probably a stupid...

Hey guys , question to all the painters/body work guys . I know that the lighter the color paint job the less imperfections it will show . But how about flat or semi gloss paints . Do they hide imperfections better ? So for example a light gray gloss paint job, and a flat light gray paint job ...

So I pulled my Trans out , so I could install a cope full manual valve body and the billet servo . Instead of me doing it I Decided to drop it of at my Trans guy . Today I finished putting everything in , connecting all the lines etc... Everything got put back and bolted into place. So...

Hey guys , just seeing if anybody has any kind of info, websites , build threads etc.... on the 67 18 dodge dart. That raced trans am back in the day . I'm really curious how his suspension was set up , that's why I'm asking and I'm really not finding much. Thanks .

Hey guys just wondering if anybody is going or participating this weekend ?

Hey guys so ive been trying to figure out all the kinks in my car to get it road worthy, and the last thing left is my brakes. Wondering if somebody could help. Car is a 1973 dodge dart, manual brakes and it used to be a full drum car till i changed it to this. I have .Willwood four...

he guys . just seeing if anybody is running a ps pump cooler on their car? Just wondering how you guys have it running in your cars. I was just wondering if it goes like this? ps pump high pressure hose to cooler , then from the cooler to the gear box right? And the return hose stays plugged in...

Ok so I'm super frustrated now :banghead:, ready to beat something with a hammer . I'm trying to get my ps box out of my car 1973 dodge dart sport . 318 ci hooker headers. I seriously removed everything . Torsion bar , ps pump , center link, steering column.the header is unbolted , exhaust is...

Hey guys , found a rear end on Craigslist . 8 3/4 741 case posi with 3.54 gear in it that I wanna pick up . The guy wants 450$ for it , supposedly it's got 1000 miles on it . I was wondering if that's a fair price and what do I need to look at when I go to check it out , so I don't buy a busted...

hey guys i have a 1973 dodge dart sport. My power steering box had so much slop in it it was scary driving it. I just puchased the firm feel power steering box. But they asked me what sector spine shaft i had , i was not sure. I think its the large one but not sure. Does any body know if its...

Hey guys , just wondering if anybody knows of a company that makes quick disconnect that will work on a Mopar steering column spline ? I really don't wanna cut the spline off and weld a new one on . Just wondering if there is company's out there or you could use like a chevy/ ford or whatever...

Hey guys just wondering if anybody on here installed a full manual valve body in their torqueflight and could let me know if it's something you could do in a garage or you have to take it to a Trans shop . Any info , write ups would be appreciated . Thanks

Hi guys, so i know there is always been a heated debate over the green bearings and stock adjustable ones. Im doing a rear disk brake conversion on my 8 3/4 and i needed to get the green bearings for my axles. I called a machine shop to press them in and they are asking me for instructions for...

hi i have a major issue with my torsion bars wondering if there is someone on here that is a mopar suspension master. Well when i purchased my car i started doing a suspension overhaul. i put tubular lower and upper control arms in , drop spindles bigger torsion bars etc.. . Basically my problem...

hey guys im just wondering if 1971 dodge demon doors will work on a 1973 dodge dart sport? Probably a stupid question, cause they look identical but figured i would ask. Thanks

he everybody, just wondering if anybody has any glass for a dodge dart sport 1973 or it could be for any other year dart or duster that will fit. Im looking for door glass, side glass and also the rear glass. Would like to find something thats in pretty good shape. Very interested. Pm me if you...

So I am putting a four point cage plus two door bars in my Dart currently thought i would put some pictures up or anybody who wants some ideas for a cage or wants to get work done in the northern Illinois area. All work was done by my friend Eric at E-fab motorsports in Lake Zurich, IL...

Hey guys had a question , I've been thinking about buying a 360 for my dart , got a 318 in there now . I found a 360 that's from 85 dodge , some guy selling it in my area running , still in car . I was wondering if there is any difference in a 85 360 or like a 73 360 ? They both la blocks .

Hey guys I recently pulled my Trans out and go it rebuilt cause it was busted. Also when I did pull it I noticed that my kick down linkage was messed up . I bought a new kick down cable from lokar and instaled the trans. I'm wondering if anybody knows how to properly adjust the kick down on a...

Hey guys. I'm having issues with my 727 . Wondering if anybody knows of any good , reialable trans shops in the north suburbs area of Il that would be able to check it out for me or rebuild it or whatever. Thanks Peter