Search results for query: *

My plastic operating lever in the steering column broke loose and fell into the steering column tube. Does anyone know where I can get a replacement? Sure appreciate any help. Thanks Dave

I was doing a little reading about alternators in this forum. When I restored my 67 Dart I upgraded my wireing harnesses with new wire if needed. When I installed my electronic ignition system, I also upgraded my alternator to 78 amps-I purchased one for a 85 Dodge Pickup D100. It fit with out...

In 2005 I put in a mini starter from Advance Auto Parts in My 67 273 Dart. I purchsed a starter for a 1992 Dodge Dakota 318 ci. Have had no problems. It fit right in. Dave

Wilbanks, Any word yet. Thanks Dave Davis

Wilbanks, I forgot to ask about cost. Thanks Dave

Lee, I am only looking for the RT and LT lens, thanks though. Wilbanks, I am interested. Do you have both RT and LF and pics. Are they in good shape? Thanks Dave

I am looking for 67 Dart Front turn signal lenses. Any help will be appreciated. Thanks. Dave Davis

Has anyone mounted a tach on the steering column or some place else without drilling holes. Thanks Dave

I used rtv on the ends. The guy said that if it became necessary he would replace the heads. Sometimes the simplest things can stop a train. After I installed the intake I put he carb on the, first the gasket and then the 1/6" plate. What I failed to do was put another gasket on between...

RedFish, I think that you are correct about the calculations being are flawed. I will take your suggestion. I just don't want to take everything apart again. I am going to request that the guy get me new heads. If need be I might retain an attorney. My wife pays $7 a month for attorney...

The heads were originally milled .050. I never had the 340 Intake milled. The new intake was milled .080 sides, .090 ends. I used the Edelbrock composit intake gasket (.060) the second time I installed the Edelbrock intake. I am still getting a leak on the right side. I used carb cleaner and...

It sure is a lot of $$$$. It's really something I need to think about. USPS probably isn't much less. Thanks for the info. Dave

Cuda, Are the 920 castings 273 heads or the 318 can"t remember. Let me know cost and shipping to 32043, Green Cove Springs Florida. daveandleigh@att.net Thanks Dave

My third time-still a leaking problem on the sides, even with the composit gasket and rtv. I have tightned and re-tightned. I need to talk to the guy that did the machining and see what his other solutions may be. I guess the only logical thing to do is put on other heads. It's trying to...

Another problem I have run into is-trying to torque 3 bolts. I have ft lbs and inch lbs. The 3/8x3/8 socket fits but there is no room for a flex extension or the wrench. I am using edelbrock bolts, 3/8 12 point. The first time I used a 3/8 wrench and guestimated 25 ft lbs and gave it an extra...

Thanks 73. I got the edelbrock composit intake gasket. My thermostat did seal ok. Dave

The machine shop did my engine work in 2006. Bore, valves, cam. He milled sides and ends. The engine is in the Dart. There probably should have not been any milling done at all, but he did it to raise the compression to 9.7:1. Dave

Thanks again RedFish. Thanks for helping an old guy out. I will take your advice. Dave

RedFish, What is your recommendation for sealing-do I use Ultra Black and put it on both sides of the gasket same as I did on the metal gasket? Did leave anything out. Thanks again. Some times growing old is a real pain-but I still am very active. l climb trees and run with my grand...

Thanks RedFish. Your always very helpful. I found 2 at advance auto parts, pn 1205composit with printoseal bead and 1206 same-however 1206 shows for my specific engine. I need to double check cause I don't trust the people at the auto parts stores. Dave

Do you have a fel-pro or other part number I should be using. Thanks Dave

Why the compsoite? Is that because the heads and intake are milled? Thanks dave

A few day ago I installed a new Edelbrock 2176 Intake. The first day I drove it it was fine. I went to take it out yesterday and noticed that coolent was comming from the overflow hose and then I noticed bubbles and coolent comming from a couple bolt holes and along the intake. I put in a new...

Thanks Demon. Mine start with a KY--one of them is a 257713-back seat. The other appears to be KY2677525. Dave

HI Crazy Dave in Jacksonville Florida. I live in green Cove Springs Florida. They were originally attached to the front and back seats. When I restored the Dart I kept them in a plastic zip lock bag. What do the numbers mean. I have not been able to locate any information on the tags...

I have thin aluminum Tags, one under front seat and one under back seat, is there any significants to the tag or the numbers on them? Thanks for any help. Dave Davis

Thanks Ron. I grew up in Southern California-Temple City to be exact. Lived there until the age of 36 and then moved to Norther California. In 1995 My job with the government took me to Florida. Dave

I know where the cable attaches from the heat and vac switch on the dash-- but does it run between the heater and ac where they attach or on the top of the heater and a/c box. I know that it make a difference. My maintenance manual does not indicate where it runs just where the cable ends...

I am running a 71 340 intake (spread bore) on my 273 with an edelbrack 600 cfm performer. Problem, It requires a spacer (1") which causes to hood to hit the insulation. I hav not been able to get the hood to sit exactly right. Has anyone ever modified the secondary intake ports, tapered them...

I am running Valvoline 10W-30 VR1 Racing oil. Has everything you need for flat tappet. Dave