Search results for query: *

120 amp alternator removed from a running Mopar small block. It probably has 500 miles on it and was new when purchased, not remanufactured. This is the external regulator version so you can keep your factory regulator and the associated wiring. It works with factory brackets as well. Super easy...

Looking for a Dodge Ram dealership sign such as pictured below. Could be different in size or shape, but needs to have this Ram logo. I've seen these in the $200 - $400 range and they are usually 36" x 48" in size. Can pick up in Illinois, Indiana, Missouri, Iowa, Kentucky, Tennessee, or Michigan.

Brand new, open box Borgeson steering shaft for 1995 to 2002 Dodge trucks. This was used for mock-up only, then removed when the project went a different direction. There is a small tear in the rubber boot that was present when received from Borgeson. I do not think it will have any kind of...

Looking for the original 340 Six Pack block for this AAR 'Cuda that is being restored. Mainly posting here to hit up @Alaskan_TA or any stray Google searches. BS23J0B294277 0B294277 294277

Casually searching for a second generation (1998-2002) Dodge Ram V10 truck with a 5-speed transmission (NV4500). I already have a 5.9 Magnum/NV4500 and a 5.9 Cummins/NV4500, so a V10 would complete the trifecta. A project truck would be fine in the Missouri/Illinois/Indiana/Kentucky/Tennessee...

Under dash mechanical gauge set. Napa part # 501-1456. No longer available in stores. Oil pressure, amperage, water temperature. Neat vintage piece that would look great on a day 2 style build or on an engine stand. $22 plus shipping from 62450. Will ship to Canada.

Big block Mopar Mickey Thompson valve covers. Cast aluminum. Good shape, removed from a running 440 to go back to factory chrome. Complete with PCV valves, grommets, and oil fill cap. $55 plus shipping from 62450 Box is 9” x 9” x 24” and weighs 7 lbs 8 oz.

Figured this may be of some interest to the FABO-ites. As seen in Mopar Connection Magazine: Gallery: The Ultimate A-Body G3 Hemi Swap Guide with Project Orange Crush - Mopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar tech

Laser-cut 36-1 crank trigger wheel. 8-1/4" diameter, 1/8" thick steel with a 1/2" hole in the center. Eight slots for a variety of uses. Also has the Chrysler harmonic balancer bolt pattern drilled in it. This bolts on the front of your crankshaft pulley for quick and easy crank positioning that...

11" x 2-3/4” front drum brakes. Removed from a running/driving car, but could use a refresh. Includes drums, hubs, backing plates, and hardware shown. All studs are RH. Spindles not included. New hardware is available and recommended at RockAuto. Shoes and soft lines are junk and will be removed...

10" rear brake backing plates removed from a big bolt pattern 8 3/4 rear end. Most of the hardware is still present, although new hardware kits are readily available, cheap, and recommended. Check out RockAuto part numbers H7129 ($5.10), H2528 ($6.08), and H2529 ($6.89). Shoes are junk and will...

Removed from a 1970 B-body 8 3/4 rear end (big bolt pattern). They come with all the hardware shown in the pictures, although I'll probably discard the shoes before shipping. $120 shipped to the lower 48

Vintage Mr. Gasket shifter handle. Thick and heavy duty. Neat old piece. $45 shipped USPS flat rate Sold pending payment as of 5/11

Hurst Indy shifter handle. Has been straightened. Was in my '67 Satellite and worked well for the application. $28 shipped USPS flat rate

11 x 2.5" front drum brakes. Removed from a running/driving 1970 Plymouth GTX. Includes drums, hubs, backing plates, and hardware shown. All studs are RH. Spindles not included. Location: Olney, IL 62450 $130 plus shipping

Removed from a 1970 B-body 8 3/4 rear end. They come with all the hardware shown in the pictures. $145 shipped to the lower 48

Five original left hand wheel studs. Removed from a 1970 B-body 8 3/4 rear end. $20 shipped to the lower 48

VIN - 0B433633 (came from a 1970 'Cuda per the guru, Mr. Alaskan_TA) Casting date - 3/5/1970 I don't know the history of it, but it's been kept in storage with heavy grease all over the machined surfaces. It has not been magnafluxed. Looks like it's been bored 0.030" or 0.040" oversize. That's...

Checking to see if this 340 block's car is out there somewhere before I sell it. VIN - 0B433633 Casting date - 3/5/1970 Looks like it's been bored 0.030" or 0.040" oversize. No main caps.

Bellhousing (clutch cover) off of an NV4500 5-speed transmission. Will fit Dodge small block bolt pattern (5.2, 5.9, 318, 360, etc.). Good shape. Comes with transmission hardware (the 4 big bolts). $165 plus shipping from 62450

Mopar P2946186. Ships in the original box. Never been on a car. Should fit: All 340 Six Pack and 440 Six Pack cars '69 - '71 Hemi cars '69 - '71 Ramcharger/Air Grabber cars $90 plus shipping from 62450

Mopar P2946186. Ships in the original box. Never been on a car. Should fit: All 340 Six Pack and 440 Six Pack cars '69 - '71 Hemi cars '69 - '71 Ramcharger/Air Grabber cars $90 plus shipping from 62450

(7) headlight rings with (3) mounting tabs (2) headlight rings with (2) mounting tabs $30 shipped USPS flat rate for all of them

Mopar P4529965. Ships in the original box. Never been on a car. Should fit: All 340 Six Pack and 440 Six Pack cars '69 - '71 Hemi cars '69 - '71 Ramcharger/Air Grabber cars $90 plus shipping from 62450

Multiple cast iron 440 intakes for sale. All are the 2806178 casting number which is correct for '67-'69 440 engines. Date codes available: 8/10/67 8/19/68 10/28/68 11/4/68 $20 each plus shipping from 62450

6 blade flex fan, 18”. Worked fine, just replaced with a factory fan. $37 shipped to the lower 48

Triple gauge set - oil pressure, amperage, water temperature. Been sitting on a shelf for years. $27 shipped in a flat rate box

Cast iron factory alternator bracket. I believe it is for a 1967-1968 big block with air conditioning. Also comes with the lower adjustment bracket, but it's been modified (cut and welded) so I wouldn't recommend using it. Came off of a running 383 as is. $20 shipped in a USPS flat rate padded...

Used MSD ignition setup. Came off of a running car, but I did not hear it run for myself so I cannot guarantee the condition of any components. I believe everything was installed in 2015 and the car saw minimal mileage thereafter. Owner wanted to go back to a factory look with stock electronic...

Aftermarket harness for electronic ignition box. Will work on 4-pin or 5-pin boxes. 46" total length. $18 shipped via padded flat-rate envelope, PayPal fees included