Search results for query: *

I brought the duster out to my parking lot and did a nice little burnout. It didn't instantly break, so that is a good sign. Now it’s time to wet sand and add more clear for a deap shine.

Working on hooking up the neutral/park lock out and the reverse lights.

Well i got the car started up today. It runs great. I have to bleed the brakes, adjust the rear suspension, and loom the harness wires. then it gets a low speed test drive in parking lot. I was able to modify the stock /6 auto shift linkage to fit the 46rh. I also included photos of the od and...

If your looking for the prndl and overdrive/lock up connectors, here is where to get them. Overdrive/ converter lock up connector EFI connection, Part #: 100-00334. PACT sells this same connector for twice the price. Camshaft Position Sensor Connector Pigtail PRNDL connector ACDelco...

I started mocking up the exhaust today, but I needed to stop until i acquire some hangers. I decided to ditch the 3 bolt header flanges and use V-bands. I am putting the mufflers at the rear, most likely using borla xs mufflers. I also installed a cheapie ebay radiator. I finished up the rear...

Yes sir, I dumped the ram airbox. I don't recommend using one on a stock firewall if your after aesthetics. I have a factory a/c box and wiring, but I couldn't find a replacement a/c firewall. I ended up installing a non a/c firewall. I plan to purchase the Classic Auto Air kit. I will create an...

I bedlined the trunk and interior. Now onto completing the electrical wiring, the fuel system, and running brake lines.

I got most the drivetrain installed. Just need to have a driveshaft made now.

I painted the rest of the body parts this last weekend.

Well finally dropped some paint on the body. I painted all the backsides of the body panels too. Next step is to color sand the paint and spray the interior of the trunk and passenger compartment.

Well after finishing a ton of other projects, I finally decided to dust (pun intended) off this project and finish it. I bought a 2 post lift to make my life easier. I decided to go back to a stock firewall and use a carburetor instead of fuel injection.

Is the wiring harness available? Thanks Kyle

Is the wiring harness available? Thanks, Kyle

Here are a few new pictures of my building.

That is the axle for my "gains train".

Here are a few recent pictures of the building. I got half the building finished. I had 400 amps of power installed. I am receiving the new trusses for the 30x36 part of the building this monday. Weather permitting i will get the trusses and decking installed. I also set up my cnc plasma.

Well it has been a while since I made an update. My wife and I sold our house in california and I quit my cushy federal employee position. We officially move up to oregon. I started repairing the building and replaced the rotten wood and roof decking. I am in the process of scheduling the...

I have been debating whether to use metal siding or make it look older with hardie board lap siding. Metal is definitely cheaper and I have just enough to cash to repair the roof, rewire, and install metal siding.

Yes it is the old Arco on the way up to the dam. It is right outside the town of Lowell. I might put on a drive in night, I would like to promote community involvement.

Andy, It definitely is off the beaten path, but I grew up there so i know the area well. Its the only road to goes up to Fall Creek Reservoir. It is a heavily traveled road for individuals going to the camp grounds, logging, and boating.

Dustin, I am still in california, but thank you. I grew up in Fall Creek. This property is out by fall creek lake in unity.

Thanks for all the support. It will be a lot of work to repair the building and get it set up the way I have planned. I plan on opening a side business providing metal fabrication. Preferably toward automotive fabrication, but I have worked in all the industries, so I will provide commercial and...

ARCO Graphite? I am only 33 years old, fill me in the with the details.

Here are a few more picture, but not very good quality.

Thank you and yes I will be getting more pictures up. The property is about 30 miles east of Eugene.

Well, last year I was thinking about my future and what I wanted to do. I decided that I wanted to open a part time shop, get a different full time job, and move back to Oregon. I currently live in the bay area. I started looking for a place and decided to contact the owners of a property I knew...

Well, I have been slowly trying to figure out how to connect the stock dodge ram steering column to my duster steering box. I ordered up a Borgeson steering coupling to go from my stock box to a 1" double d. I then used the water jet at work to cut out an adapter from the ram shaft to fit the...

Wow, this is an old thread is replied to.

The 4x8 plasma table i have at work runs a powermax45. I have cut up to a 3/8 thick plate with a pierce start. It works great and the book's specs are on point. I am buying the powermax65 for my cnc plasma at home. Head over to plasma spider for all the info you want on the powermax line.

I really liked the quality of the autoweld rails. I put them in my duster. You can put them closer to the centerline of the car if you want more room for bigger tires. They fit the contour of stock floor pan nicely. They came out perfectly lined up where they meet up to the taillight panel.