Search results for query: *

No sir, 14x8 with a 215-70 R tire. too wide. I am going to replace with the same wheel that is on the front. Air shocks required to hold up so they dont rub.

Here's my baby. 225 single barrel

USAF, Lt Col, retired, 1972-2000, ND, NH, AL, CO, NM, VA, stateside plus Alaska (2) Germany (2) Bosnia/Kosovo, sent to Shemya instead of Vietnam. Now working for the ANG Readiness Center.

I put one in my new garage. Got it from American Automotive Equipment. 4 poster, has wheels so the lift can be moved around the garage if I want, supposed to be moveable with a car on it. Single hydralic cylindar and heavy steel cables. Was easy to put together, heavy stuff though. Only put...

Chewy believe so, factory stock on 1964 with slant 6 and 9 inch brakes. Also remembered the front wheels as 14x6, neutral, rear 14x7, deep--I have measured the offset as a good 3 1/2 or 4 inches measured from the front. Am TDY this week so if need to be measured for you will have to wait...

205 /70 14 on the front, 215 / 70 14 on the rear. front sbp neutral depth, rear deeeeep dish, too deep for me. would like to trade out or buy replacements

If I read it right I am number 300 lou

Nice pics. thanks lou

are you going to post it under paddock carpet or name it something else? I am interested for 64 Barracuda. Lou

Bill so did the Paddock go out of business? might explain why website is not working. lou

I got the carb rebuild kit through local NAPA, only have NAPA and Advance Auto here, Advance had a corresponding number but could not source the supplier or prove what carb the kit was for. Anyway, new kit in, could not order float thru local stores, but was able to weigh it at NAPA, carb kit...

Dan does the accelerator pump diaphragm come in the rebuild kit? Lou

Dan Thank you for getting me to the tech articles. Did wonders for knowing what I am looking for. I reset the float height - not really that far off, and put it all back together and tightened up. back on the car, ran fine, but the same gasoline dump when the accelerator was pushed...

thanks will take a look. Lou

The Holley 1920 carb on my 64 Barracuda is dumping gasoline out onto the intake manifold. After pulling and cleaning the exterior, there is a small hole or chip on the bottom 'cast tube' running along the bowl on the back side. It looks like it is actually a drilled hole, but I am just waiting...

congratulations. Looks like a good start lou

What else would you like, My 64 is in decent shape, with rear seat, and the push-button torqueflite. Lou

Thank you very much. tracks with current paint and interior. Lou

In the tech archives there is a great list of what is implied as fender tag and /or window sticker codes. the Fender tag on my 64 does not match up with the presented codes. There is the alphabet across the top, with single digit numbers below. A--5, H--5, M--3, R--2, T--8 then a second...

Thanks MOPAR at heart, trying to unload a couple MB -- 380 SLC, 450SLC and a Jag XJ6. All nice but want to come back to american iron. and I had a 64 Valient signet 200 in college, so this 64 cuda I just got is the first step back. Lou

when I bought my 64 Cuda it came with Crager 14 x 6 on the front with P205 70R14 and 14 x 7 with P215 70R14 on the rear with about 3 1/4 inches of back room. As you can see from the pics, front is fine, rear rubs unless the air shocks are pumped up to 100 psi. But room for more set back. I...