Search results for query: *

I have an issue with low oil pressure during cold starts like you can see and hear in the video. It's ok when warm. It's a stock 318 within unknown history from craigslist. The engine is pretty clean inside, but I have no idea if it has been rebuilt. New oil pump, pickup, lifters, pushrods and...

The park lock cable in my '65 Barracuda with console shifter snapped and I'm looking for a good used one. Does anyone have one for sale?

I have a Lokar kickdown cable in my '65 Barracuda, 318 w/ Edelbrock 1406 carb, cable shifted A904. It's never been adjusted correctly, I used to just leave a bit loose/ longer at the carb side, so it would shift when I wanted it to. Now I want to fix that and I read somewhere here that I might...

I have a pretty bad transmission fluid leak in my '65 Barracuda with a small block and the correct 1965 cable shifted A904. I'm pretty sure later years are different and probably easier to fix. The transmission was fully rebuilt last year with all new gaskets (by someone else). I started the...

I'm looking for a small block 904 dipstick tube for my '65 Barracuda. I guess any small block 904 tube should work though they are often listed as 67-75?! Let me know, if you have one! Thank you!

So I bought the CVF racing a/c bracket to mount my Sanden compressor on my small block with '70-up timing cover/ water pump. Their instructions are not very detailed and when I asked customer support a question, they sent me this photo. I have a stock alternator bracket, no power steering, but I...

I'm looking for an Early A-body 90 degree oil filter adapter - like the on the left in the photo. Part number should be 2463661. I can trade you you one with part number 2780998, which doesn't fit in my '65 Barracuda.

I'm having difficulty getting the oil filter to fit between the frame rail and TTi dual exhaust in my '65 Barracuda. The engine is a '69 318 and the oil filter position should be identical to the '65 273, right? I have checked the engine position like the TTi instructions ask for and it's...

I'm looking for a A904 transmission dipstick for my 1965 Barracuda. I have two dipsticks already, but they are both too long. One came from the slant 6 I just pulled out of the car, but the slant 6 tube is too long and the exhaust manifold is in the way. The other dipstick I bought on ebay is...

I had a '65 cable shifted V8 A904 rebuilt for my '65 Barracuda, but it was missing the park lock cable housing. So I was planning on using the one from the '65 cable shifted slant 6 A904 that was in the car. I had no issues getting the cable out per instructions from the FSM, but housing/ cover...

I finally swapped the 318 into my '65 Barracuda. I have an Edelbrock 1406 carb that I have taken apart and cleaned and blew air through everything. I have rebuilt Carter BBDs before, but never changed anything on them and my knowledge of carbs is very limited. Before I put it back together I...

I'm about to put a '69 318 in my '65 Barracuda. I'm having a 1965 V8 A904 rebuilt with a later, larger input shaft. The car has a sure grip 7-1/4" rear with 2.76 gears (I think). It's my daily driver and I won't be racing it, so what's a good torque converter? I'm really just looking for best...

Unfortunately someone crashed into my '65 Barracuda and luckily it's really mostly the fender, but the bumper is bent as well. The chrome on it wasn't great to start with, so I've been looking for a new one for a while. There is currently one on ebay for $650 plus shipping... I don't want to...

I want to invest in a compressor and a paint gun etc. I have to repaint the hood, the deck lid and some other areas, but in the end I want a setup that will allow me to paint an entire car, so I don't have to upgrade at a later time. What are y'alls recommendations? CFM, HP, gallons? Models...

I'm looking for a 1965 A904 transmission for small block V8/ 273 in Southern California for my '65 Barracuda. I have a console that I want to keep and so I'm looking for 1965 (and possibly 1964) 904s. It's for my daily driver and I want to avoid to have to mess around with anything to be able to...

(2) 14"x7" Cragar S/S 5x4" small bolt pattern, $240 They are in great shape with no curb rash. The tires are junk due to bad alignment, but hold air and will work as rollers. In the photo of the Barracuda they are the fronts. I only replaced them because I went up to 15" like the rears. Local...

I'm looking for a 1965 Valiant or Barracuda heater delete bezel like the one in the photo: I installed an aftermarket A/C with built-in heater and defrost, so the factory heater controls are useless. Pleas let me know what you have. As far as I know most of them were delivered in Florida and...

I've had this Barracuda for about 6 years and it's been my daily driver ever since. Originally it had a V8, but when I bought the car, it came with a hydraulic lifter 2-barrel slant 6. I've done a bunch of work to keep her running. About a year ago I had it blasted thinking I could get it ready...

Yesterday the driver side strut rod broke on my 65 Barracuda. My question is: Are all A-body strut rods interchangeable or which one will fit on my Barracuda? Please let me know! Also, if someone here has one that fits and he wants to part with, let me know as well Steve

I'm looking for a front bumper for a 64 / 65 Plymouth Barracuda / Valiant . Doesn't have to have perfect chrome; it's just for a daily driver, not for a show car. Please offer what you have! Thanks, Steve