Search results for query: *

Regarding the kickdown and low/reverse band adjustments...can you gauge how much life/material is left in a band by the amount of threads left on the adjuster screws (after performing proper adjustments)? What's considered good / what's considered "worn"? I'm not really having any issues, but...

Hey Everyone, I pulled apart the valve body from my 727 to install the TF2 Shift Kit and I came across a couple of concerns while cleaning it. Since I'm not too familiar with VB's I'm hoping some of you can give some advice. I'm also planning on having a trans shop put it through their parts...

Looking for a output shaft bearing cover for a 727 transmission in a 72 Dart. This is the small rectangular piece that bolts to the bottom of the extension housing, hiding the output shaft bearing/snap ring. Let me know what you have and how much shipped to 92626 - thanks!

Hey guys, Have a 727 with a leaky low/reverse band pin o-ring and have some questions on replacing it in car. I think I have the process understood from searching the site (Remove trans mount/tailshaft. remove pan, remove valve body, loosen low/reverse band, and push pin out far enough to...

For Sale: 120 amp 1V HO Denso style alternator with less than 50 miles on it This is a popular upgrade from the mopar style alternators to a Toyota/Denso style alternator that was originally made for 89-92 Toyota 4Runner (2.4L). More info available from the Ebay Listing I purchased it from...

I had some issues with my 60 amp denso alternator with being able to put out enough power when my electric fan was running, especially at idle. The fan was pretty loud and you could hear the rpms drop at stop, similar to the common issue of headlights dimming at idle. Idle @ ~900 RPM (mild cam)...

I’ve noticed some fluid build up around the hex nut that secures the speedo cable to the speedo gear adaptor housing. Thinking the inner seal on the adaptor housing was the culprit I ended replaced both the inner seal and o-ring. Cleaned everything off, went for a drive and noticed fluid in...

Hi - I'm looking for a copper horn contact ring that fits into the steering wheel/steering wheel adaptor. This is for a 72 Dodge Demon I've attached a picture for clarity. Let me know what you have and how much with shipping to Foothill Ranch, CA 92610 - thanks!

I finally decided to investigate why the horn on my 72 demon wasn't working and I discovered that the connector tab on the horn contact ring for the switch's ground wire was broken off. Probably unrelated but the plastic insulator that is sandwiched between the copper ring and adapter looks...

Pulling into my garage the other day, I came in a "bit" too close to the garage door opening and scraped the rear RH 1/4 panel. Fortunately there was really no damage to the paint a little buffing can't fix, but I did manage to scrape off the Rear RH Wheel Well opening chrome trim. In looking...

Looking for a Holley 650cfm 4bbl square bore carburetor, preferably with Vacuum secondaries & electric choke. Please provide the following info when responding: What is the list number on the carb? What is the current condition of it? How much shipped to 92618? Pictures are nice too! Thanks!

For those that are using a MSD Blaster SS ignition coil; how/where are you mounting it? I bought the AR Engineering bracket from Mancini to be used on my small block/edelbrock air gap intake manifold, however after attempting to install it, I've come to find out that the vacuum advance canister...

Holley 4160 750fm/vac secondaries w/metering plate List # 80508-1 Pulling apart my holley 4160 carb on the secondary side and I noticed that the holley gasket was actually blocking off an open hole on the carb's main body. Can anyone tell me what the purpose of this hole is and if it should be...

Need to get some vibration issues sorted out in my 72 Demon, can anyone recommend a driveline shop in the Orange County area?

72 Dodge Demon/360 5.9l Magnum/727 trans/Mallory Electronic Ignition/ Developed an interesting no-start condition after driving somewhat short distances (~5 miles) After short trips, running errands etc; my car does not start up right away, meaning I will turn the key and nothing happens...

The "DODGE" emblem fell off my 72 demon last week while I was watching it and I was wondering what type of adhesive/tape I should use to reinstall it. Thoughts?

Hi guys, I'm looking for (1) front parking lamp pigtail/socket/connector for a 1972 Dodge Demon. Let me know what you have and if pictures are available. Let me know how much+shipping to Newport Beach, CA 92663, thanks.

Looking for an intake manifold (carb'd) that will fit a 5.9 magnum engine. Would prefer an edelbrock air gap intake but let me know what you've got. Thanks.

I have a 72 Dodge Demon with a "GY4" interior paint code on my fender tag, however the seats, headliner, panels, etc... are a different color than the dash is. I believe that the dash color is indeed GY4 (gold), but since the seats and door panels are clearly a different color. How would I...

Does anybody happen to know what size bolt is used on this steering column (see red box in picture)? Its a 71 floor shift column and you are looking at the bearing housing. Thanks.

Does anyone have an exploded diagram of a power steering gearbox for a 73+ a body?

I'm looking for that little radio mount bracket for a 72 dodge demon, anyone have one lying around they dont need? zip code is 92663 thanks

I've installed a standard 1" DIN aftermarket CD player in my 72 Demon (cut the dash to fit), but I'm not quite sure on what the best way to secure it is. For those that have done this already, how did you secure the headunit so that it doesn't move around? If you have pictures that would...

I recently moved from Illinois to California and need to re-register my 72 demon which is currently registered with Illinois Antique Vehicle (emissions exempt) plates. Ive been told that since my car is a 72 that it will be exempt in California too, is that correct? The reason I ask is...

Need a working cigarette lighter assembly and wiring for a 72 demon...how much plus shipping to 92663

I have a 72 Demon that to my knowledge did not come with a cigarette lighter. There is a hole in the ashtray for where I can only assume that it would have gone, but no lighter. Even though it doesn't look like it had one from the factory, would the wiring still be there? I remember seeing...

I've got 2 Weld center caps for sale. I think they are for draglites but I'm sure they would probably fit other style Welds as well. They are in okay shape, have scratches. Would be great for a driver as you really can't tell unless your face is right in front of them. I'm asking...

I have a 5.9l magnum in my 72 demon that I swapped out the efi stuff for a air gap intake and holley 750 carb and I'm having a problem with the intake manifold gaskets blowing out. Its got a stock bottom end, stock heads with 1.6 roller rockers, hughes 1110 valvesprings, and I think its a comp...

I thought I've read somewhere that you can use LA headgaskets on a magnum engine, can anybody confirm this or elaborate? I ask because I'm thinking of buying new heads for my 98 5.9L, the EQ heads in particular, and wanted to know if I'll be able to use them with the new heads. Comments...

Fits 318-340-360 small blocks. Not sure if it fits magnum engines or not. Brand new, comes with tray and hardware. Has a little bit of surface rust but nothing that won't clean up with a wire wheel or whatever $65+shipping