Search results for query: *

valvoline global is having a bogo 50% sale plus 10% off first order. 2 5qt jugs of 20w-50 comes out to $50 w/free shipping Top Quality Motor Oil | Valvoline

What glue/ adhesive are you guys using to secure the well liner to the rear seat support? 67 barracuda if that matters. thanks, Gary

Does anyone have dimensions or a drawing for the location of the side marker lights on a 68 Barracuda? Thanks.

Just a fyi for anyone interested

Why are ads showing up again at the bottom of the page.. I have adguard but they started showing up again yesterday

Driving home yesterday as I went to pass a slow moving truck I went for 2nd gear and nothing, coasted to the side of the road. Put it in 2nd and car would not budge, no 3rd or 4th, only 1st. Drove home (about 5 miles) in 1st ugh. When I got home I had reverse and first, parked it to cool off...

67 Barracuda center console, seems to me I remember there being a spring to hold the lid in the open position, my current one has no spring. Does anyone have any pics of the spring and how it goes on, nothing in the service manual or catalogs I could find.. thanks.

Engines: 416 (340, .030 over, 4” stoke) eddy heads w/minor bowl work & gasket matched, 10.5:1, Howards solid 254/260 @ .050 .550/.555 on 108. 340 .020 over, iron heads 2.02/1.60 valves gasket matched, 10.4:1 mp 296/557 solid cam, hooker 1 3/4 super comps. Auto w/4.30 gear In 73 challenger...

67 Barracuda conv., currently ‘77 360/4bbl. 68 exhaust manifolds w/ 2 1/2” exhaust, 4spd 3.23 sure grip. Basically just a street cruiser but just want to bump it up a bit. I have the motor out to refresh the engine comp. and regasket the motor. While out I’m going to install a six pack and...

What’s your preferred routing when using 90*s on the distributor end of your plug wires? A Or B

Has anyone tried this combination. Currently I have a 24:1 manual w/ fast arm but it’s still too slow. I’ll have a 16:1 flaming river box available soon and thinking of trying it. I,m running skinny’s on the front so effort shouldn't be too bad.

looking at pitman arms for my 67 barracuda noticed they list a different one for 383 equipped cars. just wondering what the diff. is. thanks, Gary

Had an engine kick back on the run stand and it jammed my new mini starter and broke the noise piece. Is that part available anywhere?? Thanks

has anyone tried the Holley/Earl's set-up?. Revamp Your Old Six Pack Setup! - Holley Blog not sure I like the swivel fitting for the center and rear carb. I think i'd prefer the ability to disconnect at the fuel bowls with removing the large fitting. Opinions? anyone have one in use ? thanks Gary

Looking to put the lower side stripe on my barracuda. I have the stripe i just need locating dimensions, any help is appreciated thanks, Gary .

Sanity check here. Recently swapped from a HFT to SFT cam, the engine(340) had been sitting for a while but was running good when pulled. Swapped to a solid cam, had the heads gone over, valve job new spring and retainers. Cam break-in on the run stand went well, oil pressure right around 80psi...

doing a refresh on my 416 after my 2nd set or 1008's gave up. had the heads (edlebrock) and block resurfaced. so I'm going with cometics this time my question is the felpros have a bore size of 4.125 the cometic's come in various bore sizes. I'm at .030 os which is 4.070. the cometics come in...

2 15x8 and 2 15x7 small bolt pattern Rallye wheels complete. some curb rash on one trim ring. tires not included. prefer local pick-up. $300. 48062

Swapping from 4" to 4.5" axles and b-body 10" brakes. can the a-body parking brake strut be used in the b-body 10x2.5" brake assy? I looked at the classic catalog and they do list different #'s for A vs B/E but will the A-body struts fit/work? oh yea this is on a 67 Barracuda w/ 8.75. Thanks...

wiper motor, linkage and switch out of my 64 Dart. $25 plus shipping from 48062

Complete 225 & PB 904 pulled from my 64 dart. runs and shifts great. need the room. come and get it. Local only not interested in shipping. comes with chrome air cleaner and chrome oil breather. 48062. Thanks.

complete 225 carb to pan and 904 pb trans pulled fro my 64 dart. ran good and shifted fine. local pick-up $75. also have exhaust pipe, muffler and tail pipe, $25. richmond, mi.

pspringtime good for 15% off today till 10 pm est. also try prettyday for 20% Gary

Has anyone used this tool with any success? and how exactly does it work,No install pics? Mancini Racing Lower Control Arm Pivot Remover Thanks, Gary

In my challenger I have a Sport comp Playback tach which also has a intergrated shift lite. They don't make that model anymore. For the Dart I'm building I have a standard sport comp tach, AutoMeter Sport-Comp Series Tachometers 3780 Autometer makes a Shift lite controller w/ rpm playback...

Guys I'm working on a 64 Dart(currently /6) that I'm putting in a 340 with a 6pack. I'm wondering if the stock T/A air cleaner will fit in the car. It looks like the hood torsion bars might inerfer. Does anyone have the setup in an early A? Or can you give me a dimension from the rear carb stud...

All right guys what's the secret to removing the windshield wiper arms. this is on a 64 dart. I removed the nut on the end but the arms won't budge. Sprayed a little wd-40 and tried prying upward with a 3/8" open end wrench but no luck. Am I missing something or do I just cut them off? Help...

Guys that have gone from power to manual steering did you change you alignment or did you stay with the specs you had? I know we all shoot for as much + caster as we can get with stock parts but the spec for manual steering call for 0 to -1* caster. Thanks, Gary

For guys that have swapped out your cast iron master cylinder for the lightweight aluminum, did you have to add a residual valve inline for the rear drum brakes? (front disc's/rear drum) Gary

MP 8 3/4 adjustable pinion snubber $35 + shpg from 48062 paypal or Postal MO.