Search results for query: *

74 dodge dart 7 1/4" rear end with 10 drum brakes with hangers and brake hardware with a sway bar also. It spun an axle from what the rear end shop told me, so I switched to an 8 1/4". located in Northern California , Santa Rosa Ca No shipping $175 takes it all

So I have a 318 that has about 25000 miles on it and runs good but I noticed the last few times I drove it seemed to have a miss and popped out the carb when I jump on it, only a few times. Now I noticed when in gear {automatic} stopped the alter gauge drops when the miss hit's. You can feel...

So I did a v8 swap a few years back and the 74 dart 318 I installed in my 69 dart had a/c so I have been running the car with the a/cc belts running thru the pump. I have issues with the belts squealing a bit at higher rpms. I need to find out what parts I'll need to get rid of the a/c pump...

Had my work van in to have the injectors replaced and got a call that there is a crack in the cylinder wall. It looks like I need a whole motor. It's a 98 votec 350 chevy , it's a Grummans panel van 3/4 ton so I would say I need a 4 bolt main truck motor. I looked at Summits and ebay. any...

I'm looking for a 70's 7 1/4 axle with 4.5 BBP with 10" brakes. The axle I have you can slide the bearing on by hand so I'm trying to find an axle replacement. It has to be the BBP axle because it has the larger bearing than the SBP axles. PM me with your offers. I'm in California 95407...

If I was going to put a sure grip in an 8 1/4 what are the best ones, not used but the better one to use and what ones are junk? I was told the dakota ones are not any good, the clutch style. Thanks

I'm having an issue with my 7 1/4 BBP rear end and need a drivers side axle. The bearing you can slide on by hand and wanted to find a replacement. I'm kicking around the idea of installing the 8 1/4 I already have on the side of my house. any thoughts? This might give me a reason to install...

So here is my issue, I have a 69 dart that I swapped out the /6 904 and 71/4 SBP for a 74 dart 318/ 904/ 7 1/4 BBP . I did the swap about two years ago and have had a little tire rub on the passengers side rear tire only if I hit a sharp right hand corner to fast. Very minimal issue. Last night...

Here is an article about California license plates being made again. The yellow ones black one and blue ones. For those of you who want and old color plate again. http://roadwarrior.blogs.pressdemocrat.com/15857/now-you-again-may-get-a-vintage-license-plate/

Hey Does anyone know how to prime the foot pump for a windshield washer . Mine is a 69 dart style. When I did the V8 swap I took the lines off for the squirters to pain the motor compartment. ever since I put it back together I can only get a little sprits of water to come out with pumping the...

Here I am showing off my new Norvorca carbon fiber Greenland paddle!

Just ran across this add for a 63 valiant , kind of pricy but a nice car. http://sfbay.craigslist.org/eby/cto/2752366103.html

Can anyone tell me why my foot pump washer doesn't work? It worked fine till I changed the engine and painted the engine compartment. Do I have to reprime the system to get it to work after three months ? It worked fine when I removed it? If I remove the water line off the tank and blow into...

Last month I had to change the distributor in my 318, I dropped it in right at the same point where it was when I removed the old one. Set the timing at 2 d before tdc and the car was gutless, set it again at like 6 D before TDC and it runs great has great performance but my gas mileage seems...

For some reason all the threads are posted backwards when I read them, meaning the last post on the thread shows first so I have to scroll down to the bottom to read the first post even sometimes the last page to read the first post. This problem just happened about two weeks ago? Thanks Ted

I'm working for a customer with his new house and noticed a car on the property and asked him about it and he told me it has a 440 big block motor. He said the car was loosing power and found the a/c unit was seized up so he started to pull it and ended up pulling the motor and didn't find...

So I bought a test light pulled the negative battery cable and started pulling fuses to see what the draw was. I had figured out last year my stereo was the draw so I bought a new one installed it and the same problem arose? Any stereo guy's out there ? I went back and checked to see that the...

What do I set the timing at for a 318 1974 how many degree's before tdc. Thanks Ted

I found this on facebook a friend had posted cool story about cars found in a barn, I could only imagine. I didn't see any A body's. http://www.stumbleupon.com/su/2uzUOr/dalesdesigns.net/barncars.htm

Well I have had a couple of issues lately with my 318 not starting up after I have driven for a half an hour, then turn the motor off unload the kayak and gear and go to park and it just turns over and is real touchy about flooding it. So the other day I was checking the idle speed and noticed...

Here I have a set of new chrome valve covers for a 383 440 engine. Located in Santa Rosa ca 95407 I won them at a local mopar car show and they won't do me and good with my 318. $30 + shipping cost . Thanks

I have a 69 dart and just bought a new replacement vinle top. Has anyone done this and have and tips on how to #1 get the chrome off { special tool} window chrome also. #2 prep for install and getting the old off. #3 what adhesive worked the best and where to get it. #4 installation { glue...

I have a two door hard top I'm looking for a new vynle top. Does anyone know where to get one online /quality/ price? Thanks Black in color, anyone ever install one themselves?

Here I have a pair of new chrome valve covers I won at a mopar car show. They are for a 383-440 short V/C . They are RPC valve covers{ Race power company} There are two black rubber grommets that come with them in the box. I'm not going to need them with my 318 . $30 bucks + shipping to your...

Here's the deal, I had a slant 6 non electronic ignition, swapped out for a 74 318 with electronic ignition. I put the electronic ignition into the 69 dart with the 74 ballast resister and voltage regulator. The car runs great but I have gone through three batteries, thinking that there was a...

Went to the show this year and took some photo's and thought I'd share .

Any thoughts on why my ballast resistors getting hot?

The turn signals all work on the out side but the left turn signal does not light up in the dash cluster. I have tried to switch the bulbs and switch the plastic plugs the bulbs go into. I also tried fine sand paper on the contact where the bulb twists into. The car is a 69 dart . I hate...

I'm looking to buy a 340 block from the 70's with X heads. What can I expect to pay or what have other members paid for a long block 340 motor. Thanks

http://growingbolder.com/media/technology/vehicles/rachel-veitch-international-575909.html#content_tabs