Search results for query: *

My uncle is restoring a 1972 Dodge Demon with a full vinyl top, and he needs the trim for the A and C pillars. Should be a total of six pieces.

I got a fiberglass hood insulation pad from REM for my 65 Dart. First, the instructions say to mount it "with skin side toward the hood". But the instructions are generic and not specific to my car or even to Mopar. Anyone tried mounting one of these things the other way? Thoughts or...

My experience with 7.25 rear ends is limited to a 1965 I worked on for my Dart. On that rear end,preload and backlash was adjusted using shims per the factory service manual. Today I learned that there are 7.25 axles that use threaded adjusters to set preload and backlash. 1. Does anyone...

I'm looking for a dual groove air conditioning compressor pulley for a 1965 Dart with factory air. Here are some pictures of what I'm looking for:

Need a flywheel for my 1965 273 4-speed. I'm in SoCal.

1. Will Signatures come back, or should we re-create them? 2. How do we find our old Posts and Threads? 3. Will it be necessary from now on to click to view each picture in a thread? Maybe you could start a thread on the progress of the upgrade and remaining tasks so we know the game plan...

I'm looking for one nice Dart GT emblem for my 65 Dart. It's the rectangular black and chrome badge that was used on early Dart GT's. It snaps into the round holes on the interior of the door just below the vent window. I'm looking for something either NOS or good used condition, not pitted...

This is not my car. Found the ad on Craigslist and thought I would share it here. http://orangecounty.craigslist.org/cto/5466452613.html

I have a pair of aluminum fender trim pieces for a Dart GT that run the length of the front fenders along the top. They are too short to fit my 1965. The ones that fit my car are approx. 43 1/2 inches long. These are approx. 42 1/4" inches long. I'm guessing they are from a 1966 but not...

Just like the title says. Looking for a clean un-cut harness for inside the trunk lid. All it does is run the tail lights. I imagine 66 would be the same.

I just discovered that Classic Industries now has 1965 Dart Candy Canes. At 469.99 a pair they are more expensive than Layson's, but if you get them during a 30% off sale they would only be 329. "Only" Not sure when that changed, but when I got mine, Layson's was the only source...

I'm looking for 2 spare aluminum fins (or one valve cover with 2 fins attached). If they are rashed up it's OK, because I plan to restore them. Need the early style that was used in 1965 and I think 1966 also.

Is it possible to replace the entire floor of a 65 Barracuda in one piece? If so, how does it go in, through the side door/qtr window, or through the back window? The car also needs a new cross member because somebody cut the cross member for some unknown reason. I have a solid floor in a...

I recently acquired a 65 Barracuda. The fender tag says it's a factory 4 speed car, and the hump in the tunnel looks factory original from inside the car. The factory seam sealer is still intact and the paint looks totally believable. But when I look under the car, the cuts that were made...

I recently fired my 273 for the first time. The engine is difficult to start but starts best with the distributor set at approximately 60 degrees advance all in. Once running above idle speed, I can time it back to around 35-40 all in and it will keep running. But when it quits it's hard to...

I'm restoring my air conditioning and heater boxes and I have a mystery to solve. I've located schematics for 66 and 67 AC and I understand the schematics pretty well. They both show something called a "Air Conditioning and Heater Resistor Bypass Switch". The purpose seems to be increase...

I'm looking for the body plugs for the inner fenders where the headlight wires pass through on an Early A-Body. I have one that is serviceable so I really only need one, but if you have two nice ones I'd take them both. Here is a picture of what they look like.

I'm all set to pull the trigger on tires, but before I make a mistake, I'm hoping to find someone who has run these sizes on an early A-body and can confirm they don't rub. Car: 65 Dart Convertible, 7 1/4 Rear, Stock springs & shackles. Wheels: Cragar SS Front: 14x6 rim, 3.375 BS, 215/60R14...

I seem to have misplaced a part of my car that I need to install the steering column. It's the larger plate that bolts to the firewall where the steering column goes through. The smaller plate (which I do have) then bolts to the larger plate and holds the seal around the steering column...

I'm looking for a bumper jack for a 1965 Dart. I think it looks like this: Here are some part numbers I found in the 1965 Passenger Car Parts Catalog: Jack: 2461103 Hook: 2461110 Bar & Base: 2275450 Handle: 2201009

I tried to clean the numbers on my odometer and accidently wiped off a number 3. Since I don't want to watch the blank space go by every 10 miles, I'm looking for an odometer. 1965 Darts have black numbers on white background. I would also look at complete instrument clusters as the clear...

I tried to clean the numbers on my odometer and accidently wiped off a number 3. Since I don't want to watch the blank space go by every 10 miles, I'm looking for an odometer. 1965 Darts have black numbers on white background. I would also look at complete instrument clusters as the clear...

I have the skinny one on the left. I need the fat one on the right.

I'm doing a fairly correct resto on my 1965 Dart with 273 4bbl, but I just couldn't bear to install the original fuel line/filter setup. The combination of hard and rubber lines and all the clamps just looks messy to me. So I set out to come up with a hard line setup that looked somewhat...

I've got a 1984 904 transmission out of a 318 Fifth Avenue that's going into my 1965 Dart with a 273. Before I put it in, I want to change the seals and adjust the bands. Does anyone have the band adjustment procedure for this transmission. I'm finding lot's of conflicting info for...

Just like the title says. I need the alternator adjusting strap that was used on 1965 273 V8 with factory AC. I have the alternator bracket, which is cast iron. Here's more info on my setup: http://www.forabodiesonly.com/mopar/showthread.php?p=1970456802#post1970456802 What I need...

I need a double groove AC Compressor pulley for my 65 Dart. According to the 65 Passenger Car Part Catalog, it should be 6 1/2" outside diameter. Part Number would be 2521654. But I'll look at anything with two grooves. I would also be interested in the whole compressor if it had the right...

I ordered the Gates 42553 water pump listed on Rock Auto for my 65 Dart 273 with AC. But when I compared it to the old pump I noticed a problem. It has an extra 1/2 NPT inlet on the top left. This inlet creates a bulge in the water pump casting between the two bolt holes where the AC...

I got this driveshaft from a 1966 Dart. It's the kind with rubber inside. I didn't pay attention when I removed the yoke and now I don't remember which end is the front.

I have a 1984 transmission (998 I believe) out of a Chrysler Fifth Avenue. I want to put it into my 1965 Dart. Does anyone know what speedometer cable to use for this application?