Search results for query: *

Well there were 10 cars (Most of any Class) in E/SA this last weekend and they were the fastest field I have ever seen in this Class. In the final we faced a early 70s Z28 LT-1 former built and owned by Jon's friend and Multiple World Champion Justin Lamb. It is now owned by K an N who is a...

Jon beat the Number 1 Qualifier in a nail biter first round and steals his 2nd bye run by to advance to 3rd round in stock. He also won in Superstock and advances to 2nd round. I won in stock putting up an .02 light to advance to 2nd round. I turned on the red in Superstock against former...

First round I drew former Division Champion Ryan Mangus. I was holding .035 on the tree and went down and took a .004 strip on his hard closing Nova with the 318 Aspen Wagon. Second round I had the misfortune to draw the former to Champion and current Division Champion Jody Lang. I put up a...

Despite all the Rain/Wrecks/Oildown, we had a blast at MATS. Thanks to the Painter Family! Jon went to the finals in his Valiant in footbrake and broke out .002 I went to the finals in Modern Muscle ( Surprised several Hellcats along the way). I will see if Jon can post pictures later!

A couple rounds into the Race, Jon faced off against Former World Champion (And Family Friend) "Bad Brad" Burton. This was a rematch of the finals at Arizona Finals a couple years ago where Brad beat Jon in a very tight race. Jon held a tiny advantage on the start with a .007 light but Brad...

I raced former World Champion Ryan Mc Lannahan I put up a .022 light to his .020 light I dialed 11.08 and ran 11.086 (Dumped at 1275 Ft). He dialed 8.51 and ran 8.504 Next round my Hood latch broke against Troy Vetter who won the whole deal. Anyone have an extra Demon Hood latch 71/72 or...

I was out of the country, but my boy took his 68 small block street Valiant out to practice for next week at LVMS Saturday. He won Pro (Although he was Foot Braking) and got to Semis in Sportman. He is hoping to improve on his Stock/Superstock runner up in the finals of $10,000 to win race...

I acquired a fresh case of Summit 10% Discount Coupon from my friends at Summit Racing! These expire 12/31/2024. PM me for coupon codes.

Want set of eight EAGLE SIR rods new or good used.

I hurt the 318 Superstock engine in my Aspen and need a couple three Manley "Cascar" rods. I will buy a whole set it need to get a couple.

Last day to use Summit 10% discount Coupon Codes. I just used then this afternoon in additional to my Pro Shop Discount on my Phone Order. My Good friends (DeFrank Family) and some of the best Superstock and Stock Racers of the last 50 years own California Car Cover Company. I believe their car...

I still have a hundred plus coupon in a bucket in the shop. Next year they will be Wallpaper! As the expire in a couple weeks 12/31/2023. PM me and I will send you several if you might use them. Merry Christmas. Our Savior is Born!! Hallowed be his Righteous Name!!

I Had a matching pair of 915 J heads off the same engine. Both have the "J" down by the spart plug holes but one has no casting number on it either on the top or bottom of the head. I was never cast into the head but the area where the casting would be is blank and never had a casting number in...

Looking for 72 up .143/.147/149 factory jets that are not redrilled but stock size. I have been drilling mine out for 50 years and I would like to try some undrilled ones as I can only drill but can not change the approach angle which might make a difference. I will pay a good price.

I am looking for an affordable Small Block roller camshaft with no bad lobes. I am have a bunch of large ones - 700/800 plus lifts I am looking for a small one 550 to 600 lift at 1.5 Ratio and 245 to 260 Duration @ Also would buy a Solid Lifter with similar specs. I am going to test...

I usually drill my jets. However, I am looking for undrilled original jets for comparison. I will pay anything within reason.

Well second round Jon face Bo Butner in Super Stock. It did not go Jon's way as Jon slipped all the way to a .06 to Bo's .03. To add insult to injury, I was beaten by his wife Randy Lynn Butner (Shipp) in Stock Eliminator. We both had nearly identical .02 lights and Randy legged it out to the...

I scored a case of several hundred Summit Discount Coupons from my buddies at Summit at the Vegas Nationals. 10% of on most of their items. The are good until the start of next year! PM me on this site and let me know if you need a couple.

Here is a great 413 Industrial Block out of the Oil fields of So Cal. Never overheated and low hours run only on Propane. Still standard and nice Hot Tanked/Magged/Pressure Tested I bought six industrial Blocks in the late 1970's AND this particular block Sonic tested the very best of them...

Saturday they ran a Wally Class race in the Stock Classes for the only time this year in our Division out here in the West. My boy Jon entered D/SA which is a class that is generally dominated by Big Block early muscle cars. There were 8 entries in this class which was one of the most popular...

These are good until 12/31/23. I have a couple dozen left after I sent them to my friends on this forum that wanted them They gave me the 10% discount on my entire purchase on top of my regular Pro Shop Discount! Happy to send you a picture of coupon with unique number on each one when I get...

LVMS has not had a test and tune or a Bracket Race for about 5 months! They decided to have their annual Wally race at the last bracket series of the year. My boy got to the Semi and had a .002 Red light after a couple rounds of Double 00s We were up early thrashing on cars that had not been...

These are the original part # L2406 Powerforged Pistons I believe I have had them on the shelf for the best part of 50 years. I very much prefer them to the supecede number TRWs from the newer years. I believe the tolerances and metallurgy to be superior to the Chinese forged "finished in USA"...

I need Thermoquad Jets: 72 up 143 147 149 71 only 125 128 131 136 I have been carefully precisely drill jet when I cannot find them but I really prefer the factory jets when I can find them, I worry about the approach angles and a couple other thing that probably make very little...

Here are three very nice sets of Crane Roller Rockers. These have been in the shop since the last century. The are the best American Old School that Crane ever Built and the metallurgy and quality is better than the 1,500/2000 priced rocker you find today. These were never driven on the street...

Here is the nicest A Body 71 Duster that I have ever seen or been around!! It is a Original Sassy-Grass (J6) V8 Duster (G Code) The body and paint are Silk Smooth on a very nice low mile car that was someone's 20 year build with the absolute best of everything!! The paint and finish detail are...

My very close friend and the man who has prepared most of my cylinder heads for all my race cars has been sadly forced to close his shop due to Health challenges! Here is a trailer load of his selected Mopar heads that he has collected to prepare as ordered by racers. All have been Hot...

Here are a bunch of Torqueflite Transmissions 2892031 67/68 383 HP (I think out of a 67 Cuda Form S) Sold 3515846 71 383 HP $295.00 3515852 71 318 $275.00 SOLD Hard to find: 2801541 1967 Dodge RT 440HP (Correct for 67/68 RTs and GTXs) $375.00 904 Slant 6 / 904 $250.00 I will deliver for...

Brand New and Never out of the Box!! This in my opinion is the best ger drive that I have ever used. I received it in 2001 when they were American Made with America Steel and Machine Work! I much prefer it to the new Chinese Milodon Junk or anything else that is currently available on the...

I was looking on the Harlan Sharp Rocker Descriptions and it has a special Rocker that only fits RPM and Trick Flow Big Block heads and nothing else. I have always just run a regular roller rocker for standard Mopar big block heads with no issue. The Geometry and fit looks fine and I have made...