Search results for query: *

I was attaching the right angle adapter on the 273 the other week. Unfortunately, I snapped the large mounting bolt. I was able to remove the threaded portion. I ordered a mounting kit that came with gaskets and a new stronger bolt. Unfortunately, the bolt is short and won't engage the threads...

I'm in the process of putting my brothers 273 engine together. I have one rocker arm that doesn't have a very good interference fit with the adjuster. I'm looking to purchase a replacement rocker arm with proper adjuster function.

I'm building a Commando spec 1967 Commando 273. We decided to install a windage tray. I located a tray and hardware. I understand that 318 and 273 engines used washers under main bolts to add spacing for the tray. I measured the bolt length as well as the depth of the main bolt holes. Although...

I'm looking for a sway bar for an upgrade on our 1967 Barracuda. I have the control arms with tabs. Would prefer to pick up at Carlisle on Friday.

Hi Gang. I'm getting ready to start wrenching on my brother's 67 notch. When I put my duster together, I downloaded an assembly checklist off of Resto Rick's site. Unfortunately, I didn't save the download and it seems that I am not able to access any of his archived info. I'm just checking to...

I'm selling this Longacre caster/camber gauge that I purchased last year. I've used it on my Duster build and I think that it is time to sell it. Like new. $200 shipping included.

I have been battling a leaky 727 pan for about a year. I tried multiple gaskets and finally purchased the Mopar reusable gasket. Unfortunately, the pan still dripped from the front left corner. I also had a leak from the speedo pinion shaft. I decided that this was the weekend that I was going...

I have a Grant Tuff steering wheel that I purchased new last year. The wheel is in wonderful "like new" condition. Unfortunately, it has some blemishes on the satin spokes that just bug the hell out of me. I'm asking $75 plus shipping.

Hi Gang I'm looking for a replacement passenger side exhaust manifold to replace our cracked original. Thanks

Hi Gang The body shop didn't save the original header panel from my brother's '67 Barracuda. I thought that if somebody has a header panel they could make a template for me using painters tape. Thanks in advance.

Hi gang. I need a timing chain cover for a 1967 273 engine. Part number 2128896. This is the cover that does not have timing markings on the driver's side.

I am looking for a power steering reservoir for a small TRW pump

Just started to rebuild my brother's power steering pump when I noticed that the reservoir housing is crushed under the bracket. Looks like somebody used a pry bar to tension the belt. This a small TRW pump with the solid pump shaft.

I'm getting ready to rebuild a Federal style power steering pump. I suspect that the pump shaft has a wear ring at the front seal. Does anybody know if there is a Speedi-Sleeve available for a quick repair? I've had great success with these on differential pinion seal leaks.

Hi Gang We're working on my brothers '67 Barracuda notch and have decided to add the hipo exhaust with resonator. I need measurements of the size of the rectangular opening on the driver's side of the valence.

Hi Gang I'm rebuilding a 30 spline clutch-type Sure Grip from a 8 3/4 differential. One of my pinion shafts is broken. I have not been able to locate replacement parts. Doctor Diff sells a complete internal repair kit however, he out of stock. I thought that I would put this out on the FABO...

I'm getting ready for my first differential rebuild on my brother's 67 fish. I bought parts from Doctor Diff. Everything is stripped down and I have my pinion set-up bearing. When I tore everything down I noticed that there was only one carrier adjuster locking tab on the left side. I thought...

I need a left hand trunk floor extension for my brothers 1967 Barracuda restoration.

My brother purchased a used 8 3/4 diff. of of a 1969 Formula S Barracuda. I'm in the process of rebuilding the rear. The brake drums and baking plates were removed along with all the brake components. The old drums measure 10" x 2 1/4" on the inside so that's what I ordered for replacements from...

We've started working on restoring my brother's 1967 Barracuda notch. His car is a 273 2 barrel. He wants to upgrade to the Super Commando exhaust system. I was wondering if any of my FABO brothers could help us with pictures and measurements of the rectangular valence cut out for the exhaust...

My brother and I have started on restoring his 1967 Barracuda 273. He has been thinking switching over to the 273 hi-po exhaust system. The rear valence will need to be changed from the single exhaust cut-out to the rectangular hi-po cut-out. I would be obliged if someone could post pics with...

Hi gang. I've been toying with the idea of installing my late 70's Direct Connection electronic ignition in my 1970 Duster 340 restoration. My biggest issue is that I don't want to mount the ECU in my engine compartment. I'm looking for suggestions from other members on ideas on where to hide...

Bought a drill press vise several weeks back. Unfortunately, the mounting points on the vise and on my drill table really limited its application. I decided to fabricate a sliding and rotating table mount that could be removed from the drill press if I needed the press for other applications. I...

I need some help from my FABO friends regarding fine tuning the Duster 340. I decided to try optimize the tune on my car today. The 340 is a stock rebuild with a Lunati Voodoo cam, AVS carb, factory intake and exhaust manifolds. Ignition is a Prestolite dual point converted to a Pertronix. I...

Hi Gang. It looks like my original fan clutch isn't working properly. The part number is 2863 233. What are my options if I want to keep the original appearance? Do rebuild services exist? Are NOS units available? Will one of Tony's Parts work? Thanks Kevin

Hello All: I'm in need of the screw that attaches the glove box door strap to the dash frame. This screw has a shoulder to allow for motion of the metal strap when the glove box door is closed. Kevin

I've been working on final bugs in my Duster restoration when a new one just popped up.All wiring harnesses were replace with M&H harnesses during the build. All electrical components were working fine. Recently, my turn signal flasher stopped working. I purchased a new one from Auto Zone and...

I've been slowly getting my downstairs work shop cobbled together. I've never owned a drill press and I thought that I would look around for one for the shop. After searching my local Marketplace, I stumbled upon the vintage Craftsman 150 floor press about 10 miles from my home. I checked out...

I'm looking for either a NOS or very good original front license plate bracket to fit my 1970 Duster 340.

Made a pair of these today. Thought I would post my video. YouTube