Search results for query: *

Has anyone tried to fit the Trick flow 240 with the track heat Intake B engine under the hood on a 70-72 dart

I have a 70 dart with a new big block stroker motor i need to get dialed in ,i want to put a new Carb and valley tray also.

Looking for a good 65 dart horn button

How do you get the 7 wires from the new wiring harness down through the steering column I taped them together they are too bulky to fit through can anybody help figure out how to get the harness down and I used a wire to pull old harness up through I had to cut ends first I then attached wire...

I just purchased a new signal switch and wiring harness The New one is the first picture it has 7 wires the old harness has 8 wires , some are different colors need help don't want to take it apart more than once

I am trying to replace plastic defrost vent and tubes ,there are 3 flat nuts on the under side I cannot get a ratchet on them any ideas would be appreciated 65 dart w/air

I am looking for the rear quarter window windlace in lipstick red any help would be gratefully appreciated

I need a good heat riser for a 65 dart with 273 2 barrel Stromberg WW carb

I was wondering if there is an alternative carb maybe a newer one that would bolt on and have the same linkage or do I need to find a good rebuilt WW 65 dart 273 Auto

Can't find a good clutch fan for my 65 Dart w/273. The original part number is 2536675. This has the smaller 5 1/2" diameter body, not the 7 1/4" most after market units have. If anyone has a good used one sitting around , I'd appreciate a pm and price. Thanks

I need the outer passenger side outer tail light in good shape for a 65 dart

I need 2 stock leafspring hanger perches for a 70 dart swinger -The forward hanger perch

I need the out tail light and housing -Passenger side

I am looking for the upper trunk trim for my 65 dart 270

I am looking for a nice set of Lap Belts for a 70 Dart Bench seat car- Black

70 dart bench seat car, I purchased the new 3 point conversion seat belts they dont allow the seat to move back because the retractor blocks the seat, it sticks out about 2.5 -3" my car has the post mounts for across the shoulder that is good ,is there anybody that sells oe style 3 point...

when starting the car the starter sounds like it revs so you cant tell if the car has started it has a new starter is there a fix for this ?

I'm looking for the candy canes and hood molding for my 65 dart. Doesn't have to be show quality

I bought 2 gallons from my local paint supply store i told them i wanted W1 paint for a 1965 Dodge dart or any dodge, chrysler I think he gave me L1 I know he could not find the code , it has way too much gray in it.

I am having a problem with my wiring LOL a 69 charger on craigslist

I need to reupholster front split bench no arm rest and rear on my 65 dart 270 i looked at the 66 and they looked identical ,does anybody know ? i think io measured 52" across on mine

i bought this 65 a while back ,i was driving and it cut out ,would not run i found this fuse blown, every time i put a ne fuse it instantly blows -I am thinking this is why it wont run any ideas i put a voltage tester and its getting 24.5 volts dash voltage limiter ? maybe the regulator is there...

Can someone please post a picture of the upper windshield trim that goes across where the rear view mirror is , Mine is missing -1970 dart swinger

70 dart with the body moulding the length of the car with the black rubber insert, the rubber is starting to lift a a couple places what is the best glue for this ?

70 Dart 470 stroker with trick flow heads Street car, is there a master rebuild kit for a 727 that is better than stock , this is a column shift ,I also need a (Non manual valve body) any suggestions.

i converted the slant 6 dart to a big block with a RPM performer intake will the original slant cable work or do i need to get a special fit and if so can someone tell me what size and where ?

Looking for a good unsilenced big block air cleaner- not the chrome type

I am changing out the door locks ,Can someone please tell me if there is a trick to threading the small rod in the Lock mechanism while inserting the New lock? i think i had to do all kinds of twisting taking it off.

70 Dart 383 engine-I was wondering if a dual snorkel would fit on a Edelbrock performer intake and carb?

I am not sure what they are called there is 2 metal strips on both ends of valley pan and i am in need of them Does anyone have them used or new