Search results for query: *

Hello I know this posting is a year old, but I ran into a problem with A 360 intake.. It is not stock Chrysler but a Wieand It will not fit because of the A\C pump. has anyone done this setup, any ideas? Will a stock Crysler intake work with the A\C pump Best

Thanks for that info.. I know there is another person looking for a vacuum diagram for the 74 318, it is funny that I found a diagram for a 73 and 75, why is it that we can never find info on the car we have!! hahaha So been up since 3:30 AM and while searching I found a diagram... for a Cal...

thanks for the input... I am really looking for the Factory location of the vacuum connection. It is a California car.. No black box anywhere automatic, air, power brakes It could the vacuum is taken off the small conister on the passenger side of the air cleaner? Thanks Best

I know this has been asked and answered too many times, but can someone please tell me where to connect the distributor vacuum line to! 74 318, dodge I have a vacuum line diagram, but for some reason the distributor line is not shown Thanks

dovercrossing, could you repost the image.. on my browser it is not opening up

thanks for the info on the backing plates. good Idea on interchanging those parts. does make it a little hard to adjust and yes the self adjuster sits just fine. My point about the valve stems is just that you can still buy American. and I hope they use better material then those made in...

Hi All My 74 swinger has sat for a long time, too long and the left rear drum locked up... yes I guess I set the brake.. anyway after getting it off, (no easy task). I cleaned everything, wire wheeled the drum and painted them with ceramic silver. (had a can on hand) but what is...

I would like to install new decals and or stickers inside the engine bay on my 1974 Dart Swinger. Can anyone provide a picture or pictures showing where they go.. I'm also doing the jack instruction, but mine is still in place so I know where that one is.. I have a 318, auto, air, washer...

Since I live here in Cal, thought I'd post and see if anyone has a local place to have the original car radio repaired And to see who knows what might be a direct replacement radio, (meaning tuning and sound knobs in the correct location.. Best

Hello Again Well I asked the question, I was given an answer. "Thank You" So I'll pass on this for others On the 74 Dart, other models might be the same you need to find that out To remove the radio, start by removing the clove box Next remove the radio knobs and using a 5\8 socket...

Hello All This is a "how to" for installing defroster vents in s 1974 Dodge Dart Swinger.. My vents are completely destroyed. I bought repo's from Dante's for about $54 a pair. To remove and install you will need to remove the clove box for the passenger side vent. and remove...

My friend has a 68 dart slant 6. He said the car was running rough, not idleing as before. So he did a pressure check on the fuel line between the pump and carb. He said it was barely 1 psi.. So he replaced the fuel pump and (I was there) the car was started and the pressure was a little over...

Any thoughts on mufflers for this basic setup. OEM exhaust manifold, probably go with a 2.25" pipe, (stock is 1.6"). How far back should the muffler be placed... right in front of the rear axle, further forward?

Guess your right.... thanks

Hello all I need to replace my exhaust system ... just old leaks, falling of car. but I want to stay with the original exhaust manifold for the time. Is there anyone who makes just the "exhaust pipe" for the 318 in an A body? I've been on summit, jegs, TTI, weldon, etc: and ouch on a few...

OK all to end this conversation. there are many sites with all the tire, rim sizes with and including best size, smallest size and largest size that will or should be used. you don't put a 255 on an 8" wide rim.... After reading countless posting about tire size, and there are a few in this...

Hello all I need to replace the tempeture sending unit for my 74 318 I've looked locally no one carries it here. I had two parts numbers (standard Motor parts TS17 or BWD WT127) although on the TS17, the seller said it was not compatible... Can anyone give me a correct parts number and...

Scamp I know they tire is old, just had to throw something on the car at the moment.. interesting about the pic and cell phone 69, there is no 1" between the fender lip and tire, I was saying there is about 1" between the tire and the spring.. I am not interested in moving the springs or...

Hello All Because of a laziness on my part I was forced to install a pair of 235\70 R 15 on the rear of my 74 Dart. I have done a lot of reading on here and what size people are putting on there cars. So with that in mind, here is what I found with the above setup on a stock rear...

hello thanks for you input, I did locate a site that has the gears, just now to determine which rear axle this car has and gear ratio.

Hello All well finally put a pair of 235\70R 15 on the back of my 74 Dart the previous tire was a 205\70r 14. Now the question is what speedometer gear do I need to re-calibrate the speedometer These newer tires are 2" - + taller then 205's Thanks

Dart, Redfish.. I disconnected the seatbelt interlock a long time ago.... the item is just a buzzer. It should be for the ignition key, but it has 3 wires, 1. Red hot, 2. is a double wire, just don't know were those two wires go to... I'm just working my way through the wiring to make...

So it turns out that the 74 is a little different in wiring then the 73. I was using a 73 shop manual for better info... on the 74 they do not use the horn relay in conjunction with the buzzer. the pic is the buzzer for the seat belt , and might be for the key...

Had an idea that is what it is. I think it is for the seatbelt The key buzzer is in the same unit as the horn relay, 4 connections... My horn works so I'll need to find the relay and check it... best

Hello all Anyone know what this item is for, and is it replaceable? It's up under the dash and seems to be on the #7 fuse circuit I have been having problems with that circuit and finally I think I found the culprit bad connection at the door jam switch, only getting 3-5 volts. replaced the...

Has there been any update on switching to a blade type of fuse block my search here was last updated in 2008. It does not seem like it would be a big deal... has anyone done the switch 74 Dart Swinger Best Dave

67dart. funny I own a 56 Packard 400... thanks for everyone's input... I think tomorrow I'll find the problem.. Best and I'll let you know what the problem was.

Thanks

Hello I'm looking for a 74 Dart Glove box light switch, New, NOS, used in good condition. Or if you know of another brand that would work thanks Best

Could anyone give me the bulb number for the (Map light) It seems its the only I have not been able to find. Thanks