Search results for query: *

Car is located near Chiloquin, Oregon-97624. Price is $8000.00 cash firm Clear titled in Oregon in my name. Vin is easy to see. This is an unfinished race car / pro street project. Tubbed with a Dana 60 and 4 link. Rear is 35 spline with strange disks, 5/8” studs etc. 4.88 gears as I...

A buddy is thinking of selling me a 67 barracuda notchback. I haven't seen the car in decades. I recall it needed a fender and things were a little beat up. What body and interior parts are really hard to find? And what do they cost for used stuff? For example, used trunk lids usually go...

I am intending to do the following to my 67 Valiant. Front will be 15x4" Vision Wheels (Jegs). Rear will be 15x8" Vision Wheels from Jegs. I think they have 4.5 and 5.5 BS available. Here is the situation: I have fender well headers with a 440 (they are an unknown older brand and seem to...

I am gathering parts for a build with my kids-think typical mid-80's street and strip Mopar build-nothing fancy, the value is in the building process. The car is a 67 Valiant with a 440 and fenderwell headers etc. Attempting to do things on a budget. Looking to buy used/sitting on a shelf...

I am contemplating getting back into A bodies. Looking to do a street / strip car on a reasonable budget. Happy to buy an unfinished project. Preferably one that already is BBP and V8. Even a retired race car would be looked at. Budget is around 3k, can ad more if I must, but I would...

Hello, I used to be an active member here pretty much from the start and then in a moment of stupidity traded my car off. Got kinda discouraged and sold off all the rest of my cars and parts. I have a shoebox of mopar parts......from 9 cars.....it's horrible getting back in when you already...

I am considering trading my Bronco project for a Mopar. I really prefer Dusters with a V8. I used to be into A bodies and had about 8 at one point. In a moment of stupidity I traded my running and driving BB Dart off for a Jeep. Totally a rush thing that I have regretted for five years. I...

I have a small shop and no need for this stuff. The header flanges/gaskets/ carb adaptor are new, the water outlet parts are used. Here is a link the carb adaptor: http://www.cliffordperformance.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=32-C&Category_Code=C250 The...

I have a nice pair of lower control arms off of a 73 Dart. The car had disc brakes and NO sway bar. Price: $60 Shipping: Yes, at buyer's expense. In the CONUSA only. PM me an email and I will get you some pics out.

This is a set of NIB headers that are the The Sanderson CAD500. These headers is designed to fit Cadillac 472-500 engines in a wide range of street rods and customs. Price: $210 Payment: USPS Money Order's strongly preferred. Shipping will be via USPS or UPS at buyer's expense...

I have had this transmission for years. It was a working transmission probably 10 years ago when I parted the car out. It is out of an 85 Diplomat. I have the torque convertor that has been stored inside my shop for quite awhile. Location: Klamath County, Oregon Price: $60 Note...

I have a K frame from a 1976 Dart. It is a /6 225 engine K. It has the factory sway bar and lower control arms as well as the frame. No other parts are attached to it. If I don't get rid of it when I go to Portland next week, I am happy to discuss selling parts off of it. $75 firm in cash...

This is a factory cast iron intake manifold that came off of a 1976 or so Dodge truck. It is not a spreadbore but a square bore style carb flange. It is 4-barrel intake and OEM. Likely delivery to Portland next week, most likely on the 30th or so. PM me your email me for pics and more...

I have a nice pair of manifolds off of a 2-barrel, 1973 318 A body. They are in nice condition with the heatshield still attached and the choke stove still turns. Price: $110 Shipping: Yes, at buyer's expense Location: Rural Klamath County, Oregon I can possibly deliver to...

I have three sets of heads. All will needs some TLC; I would call them good cores. I am willing to combine the parts and sell for less. 452 castings. Need cleaned up because they have been sitting. $60 346 castings. Same as above. $50 516 castings. These have been sitting for years and...

Hello, I am looking for a carb capable performance electric fuel pump. Ideally a Holley Red pump or something similar. It is for a school project that I am building with my students so be kind in pricing if you can:D Ideally something that you know the history of etc. Happy to pay a...

Hello, I haven't been real active on the site for a year or two. I unfortunately traded off my 74 Dart Sport with a 440 shortly after getting it going. Wasn't thinking straight and I could have been enjoying it the last few summers. Anyways.....I have wondered what happened to it. It...

Getting out of Mopars, unfortunately. I have known for a long time that I should, but now it IS time. The following parts list is what I have for big blocks. I may have some extra pieces on hand, but this is what I recall. 76 400 long block with a truck pan-good builder/maybe runner...

I have the remains of two ESAB 0558003301 kits. There is quite a bit more stuff here than you get in a kit. This is a combination of two kits that I found in my stuff. PM me your email for pictures. I have the following parts: 1. Silicon Lubricant tube-unopened 2. 10 Electrodes-New 3. 1...

This truck has been sitting for awhile. It appears to be an old Weyerhauser truck used inside the mill. The Gin Pole is included for the front of the truck to winch with. Tires hold air and the truck is complete but not running. Flatbed is well made and fits properly. The $2750 price is...

I have found an old car that has been sitting for a long time. I am contemplating picking it up for a long-term / low buck project. I don't know much about them. My guess is that it would be all custom with little to zero aftermarket support. A couple of easy questions: Do they...

Hello, I am cleaning up my car parts hoarding habit. I have been keeping two axles for a few years with the idea that I may eventually build a budget straight axle Willys truck etc. Kinda a budget "rat-ish" style build. Axle # one is about a 55 F-100 truck front end. It is pretty...

Please Read: I am coming to see family next week. I will most likely be in the Portland, Oregon area during business hours on Wednesday 8-22 and again on Thursday morning. If you can meet up then I'd like to hear from you. Please reply soon if you are serious. Email for pics etc. Please note...

This came off of a mid-70's mopar, 73 is what I am thinking. The lines look useable. I do not remember specifically which car it came off of. Look the pics over and let me know if you have any questions. Price: $45 plus shipping. Shipping: I generally ship through the USPS due to my...

This is a driver quality hitch that is made by Draw-Tite. It has 1962 dodge dart stamped right on it. Price: $25 plus shipping. Shipping: I generally ship through the USPS due to my location. Payment options: USPS Money Orders (preferred) or Paypal with buyer adding 3% to the...

I am 99% sure this came off of a 73 dart. I used to hoard parts and 99% were 73-78 cars. I honestly do not recall if it worked or not. That car has been gone for a long time. I do know that it was parked with other issues. No visible damage on this part. PN# 3431739 Price: $45...

This is a small block housing. I think it is off of a 78 and the bolt is included. Price: $35 plus shipping. Shipping: I generally ship through the USPS due to my location. Payment options: USPS Money Orders (preferred) or Paypal with buyer adding 3% to the total. Location...

I traded a member here for this carb last fall / winter. It is the 8007 390 CFM model 4-barrel. It would be a nice carb for a 225 etc. It is used and I have not ran it. It looks good and it is complete. There is more play on the SECONDARIES than I would prefer, but the primaries are...

Location: Klamath County, ORegon Price: $3550 OBO 1995 Camaro z28 with the LT1, Automatic. The car is a hardtop (no T-tops to leak), It is silver with a black roof. This is a fun car that is fast, smooth and good on gas. Miles are 133k, it runs and drives fine and is just about...

I have a complete rear end out of a mid-70's truck. It has 3.55's and 11 x 2.5" brakes along with the desireable 4.5" bolt-pattern. I was keeping it to narrow for a car because it has the right bolt pattern and brake size. Sold the car, so this is not needed. There are two more housings...