Search results for query: *

I put Procar seats in my 67 barracuda and then had local shop do back seat to match with material from procar . Seats are better than stock and have a back seat pocket ,recline and have safety lock . Adaptors from Procar are easy to assembly and fit great . Slight height increase but better for...

Have been buying stuff at Rock auto for at least 3 years .I go to Montana Shipping outlet at Sweetgrass about 1 hr from Lethbridge .Very reasonable receiving cost and nice people .The last 3 times with purchases of $260/180 and 140 got passed through border with a "have a nice day" and no gst...

Thanks to all who helped . Got a front set of a arms c/w balljoints from badlilred79 and have installed .Will get alignment but first priority is to get my mr heater installed in garage before cold weather comes.

Thanks - PM sent

pm sent

Looking for a passanger side upper control arm for my 67 barracuda . need the small ball joint unit . Threads must be good. Live in Lethbridge Alberta but have shipping address in MT so no shipping issues from USA.

Thanks for the warning on parts. Will pull a arm out later and try the welding . Where do you tack weld -upper area in how many spots and any precautions I should tell the shop about. will post a part wanted post in the correct forum .

Ball joint is no good -metal in unit so binding up . Threads on control arm damaged bu otherwise control arm looks ok .Welding in new ball joint would probably work but found a new upper control arm from WSDsuspension on e bay for around $80 and since I am selling the car do not want to give...

Thanks for info . a arms don't seem to have too much damage . Will remove tomorrow and clean up . May be in Nl next year visiting as my wife is from there and lots of family in st john- will possibly contact you.

Had a real suprise today when putting in new KYB shocks .Upper ball joint had popped out of upper control arm - don't know when happened but luckly caught in garage -could have been very bad if driving on road . Got ball joint apart with homemade tool (picture)and hammer but when looking for...

Can anyone recommend a brand ,supplier and part # for high brightness led replacement of 158 instrument cluster lamps for a 67 Barracuda. Have looked at many sites for replacements but I find confusing ,

Was looking to order carpet for my 67 Barracuda with floor a/t console(floor only) and see on all sites "carpet with console strips" or "carpet without console strips " but cannot find a site that tells me the difference. Anyone tell me what that means ond recommendations re carpet suppliers ...

Thanks to all who posted . Am going to wait for seat install in Jan. and take another look to see if stock has enough clearance for my legs-those 16in stock wheels are big. Looked at dash picture thread and got some idea of stock compared to aftermarket.Some members have dashes I only dream of.

Am putting in new front seats from Procar and am looking for comments as to the best looking , easy to install aftermarket steering wheel . I have ps and wondered if people have recommendations re size . Don't want to impede view of instruments . Was looking at the grants from 13.5-15 inches...

Anyone using the Procar Pro 90 series or 1400 lowback series bucket seats in a 67 Barracuda fb . Pics /advise/cautions please ???

I am now in Lethbridge since summer 2011 . Was previously from Cranbrook BC .Hope to meet up with some of the southern members in spring unless I sell my car before then. Merry " Christmas "to all .

I am in Alberta Canada so I have shipping costs to a border crossing UPS outlet , exchange ,border tax, etc . Front buckets,foam and rear seat in the nos gold colour come to approx $1.6 k plus the items mentioned above . Didn't mention that I have severe neck arm nerve problem so doing myself...

I am looking to redo my front buckets and rear bench on my fastback. Original interior seat colour is gold and very expensive from Legendary . If I use the original seats and legendary covers it will cost approx$2k. Was thinking of using Procar seats and adaptor brackets from YearOne in the tan...

I am moving to Lethbridge (West side -Stoney Place) at the end of June. Want to make contact with Southern Alberta members so I can possibly cruise with them and pick their brains as I work on my 67 barracuda fastback . Hoping to join a car club or 2 in Lethbridge . Am presently a member of...

I need a floor automatic shifter c/w reverse micro sw if possible for my 1967 Barracuda f/b . Previous car owner put 8 ball on shifter and without proper setup for my b/u lights am having trouble with my provincial safety ck. PM me if you have something . Tks

I must have strange car or someone did a aftermarket job . The reason I need is the previous owner did all the body work and paint and there are 2 holes on the passenger door where he said the mirror goes and said the holes were there when he purchased car so he left them and got car painted but...

I need a passanger side mirror for my 67 Barracuda fastback . I keep getting notifications from e bay re mirrors but they all seem to be for drivers side with remote . Anyone have a passanger side mirror or know of a place to get one . Have done a internet search but can not seem to find...

Got a car for my son. Tks to all who read and possibly looked for me . Cheers Wilf

I live in Cranbrook BC and use Montana Shipping Outlet in Eureka Montana. They also have a outlet in Sweetgrass.Do a search for Montana Shipping Outlet and you will find their site . Our car club (Rockin in The Rockies ) all use these people and find the service good and not to expensive.

This may not be the best place to post but here is the story. My son lives in Moncton and is having problems finding good employment and getting to Gagetown for his military reserve duties without a vehicle .Any members or your friends around Moncton who have a good vehicle for sale under $4K...

Thanks for info everyone .If I decided to sell you can look at the car by searching my posts . Hope not to sell but things happen. 8)QWKSLVR -We will be close neighbours as the house we have a offer on is on Cartier st Shediac . Don't know how that area survived the storms but we hope no damage.

I am planning a move from Cranbrook BC to Moncton NB in the spring . I need to ship my 67 Barracuda FB or sell it. I have heard horror stories about some car moving companies . Anyone out there have companies to recommend or stay away from? My preference is enclosed trailer over rail but costs...

Thanks for advise - Assumed valve covers would fit but was not sure if the extra holes were for something off that particular manifold and was not sure of how to seal off unused holes so no oil leakage and get a good look. The manifold seems to be a Edelbrock performer?? from comparing to...

Thanks for advise on intake.Have a fellow offering me the intake in picture +valve covers and a dist. He says for small block 318-360 but am not sure as valve are different on my 360.Mine have only one hole on each valve cover vs 2 on ones in picture. Can anyone identify this intake and valve...

I am planning to replace my stock intake and 2 brl on my 360. Engine is 72 I think and is in my 67 Barracuda (904/7 1/4). Was looking at the Summitt easy kit -Eledbrock performer with the 600 Eledbrock carb. This is a cruiser and not planning any strip use .Is this a good combo or is there...