Search results for query: *

i got my dart weighed. it weighed in at 2915 and with me in it it was 3092.im not done i still need to get a fibergass hood abd bumpers.can you guys tell me how much weight the fiberglass hood and bumpers will cut on weight?thanks

who has used the b&m starshifter? what are your thoughts on this shifter.i had a brand new one given to me. i dont want to put it in and find out it dont work for crap.

how can i tell what torsion bars are in my dart?

ok guys how would you set up a suspension for a strip/street dart?i am going to be getting a set of mono leafs.calvert told me i need 5" a travel in the front suspension.i dont know what springs to get stock or 1" over.i am going to run 275/60/15 tires.

i tried to fit my black magis electric fan on my dart tonite and it will not fit.the water pump sticks out to far.what i need to know is how far does the csr electric water pump stick out? the stock water pump sticks out 6".i need one that sticks out 5" to5.5".any help would be great thanks

ok i need a new dip stick tube.what kind would you guys run and where do i get them?thanks

how muck side to side play should there be in my rockers?

what size header should i run on my 340? block Work done: O-ringed, tubed for roller cam, oil gallies enlarged, bored to 4.07(.030 over) and honed with deck plates by Herb McCandless. 340 steel crank Prepared by Lunati, stroked .110 to 3.42 stroke and balanced to 8000 rpms 340 steel...

i am thinking about buying a 1995 dodge ram 2500 v-10.can you guys give me the pros and cons of thev-10? i dont care about mpg of gass.thanks

how much weight will a 12 point roll bar/cage add to my 72 dart.the cage is mild steel tubing.thanks

what is the tallest tire i can run on my 72 dart? it is not tubed.

has anyone had problems with over heating with electric fans?this will be a street/strip car.thanks

i am having someone come and look at my dart to put in a roll cage.im looking at a ballpark gess at what this will cost. thanks

So I read over on Moparts.com that when you remove the inner fenders that you must brace the shock towers? I have a 72 dart, original /6 car, now with a 340.when i got the car someone cut a hole out of the fenders and they cut some of the shock tower out. i am worried the fram will flex in. So...

i am putting caltracks on my dart and i need to lower and get 5" of play in the frontend of my dart.so my question is how do i lower and get the 5" of play in my front end? thanks and i hope this is not to dumb of a question.

what gear should i run in my dart? Work done: O-ringed, tubed for roller cam, oil gallies enlarged, bored to 4.07 (.030 over) and honed with deck plates by Herb McCandless. 340 steel crank Prepared by Lunati, stroked .110 to 3.42 stroke and balanced to 8000 rpm's.im planning on shifting at...

why do you need to be honed with deck plates? i wont to rebuild my 340,there is nothing wrong with it as far as i know.i have never ran it but it has bean sitting for over 2 years.i planed on putting it in when in got it but **** happens like i had a mild heart attack and then thay find a spot...

why do you need to be honed with deck plates? i wont to rebuild my 340,there is nothing wrong with it as far as i know.i have never ran it but it has bean sitting for over 2 years.i planed on putting it in when in got it but **** happens like i had a mild heart attack and then thay find a spot...

how much hp will a 727 handle? this is going behind my 340 with about 495 to 525 hp.i have a 4800 stall conv.

i need help picking what ride hight mono -leafs to order.if you guys have any pics of your swingers with 1 inch over and stock hight monos that would help.when i called to order them thay said thay need to know what my swinger weighs.i dont have a clue what thay weigh and i cant take it to a...

what size gas lines and pump do i need? 1972 340 block Work done: O-ringed, tubed for roller cam, oil gallies enlarged, bored to 4.07(.030 over) and honed with deck plates by Herb McCandless. 340 steel crank Prepared by Lunati, stroked .110 to 3.42 stroke and balanced. 340 steel rods...

hello everyone. i need a torque converter for my 340.what brand converter do you guys run and what stall do you guys think i need? the engine is a 340 Work done: O-ringed, tubed for roller cam, oil gallies enlarged, bored to 4.07 (.030 over) and honed with deck plates by Herb McCandless...

hello. where can i buy a engine plate? thanks everyone

hello everyone.what do you guys think my dart will run in the 1/4 mile? it is a 72 dart swinger with a 8 3/4 rear with 4.88, frame connectors,cal tracks with there springs.727 trany with a 4200 stall converter the engine is a 340 Work done: O-ringed, tubed for roller cam, oil gallies enlarged...

What size carb will i need? I plan on shifting at 7200 rpm's.The specs on my engine is 1972 340 block Work done: O-ringed, tubed for roller cam, oil gallies enlarged, bored to 4.07 (.030 over) and honed with deck plates by Herb McCandless. 340 steel crank Prepared by Lunati, stroked .110...

hello. im getting ready to buy a carb and i saw the proform. my question is are the proform carbs any good.i dont wont to buy a carb and have nothing but a pain in the a$$. thanks

how long should the bar be on the cal tracks? mine are 16 5/16" thay are going on a 72 dart swinger.i did a mock up and thay seem to long.thanks

this is a 340 block o-ringed with copper head gaskets 4.07 bore,ported x-heads w/2.08int 1.60ext,crane gold 1.5 roller rockers with crome moly shafts,cam motion roller cam 269 275 @.050 .661 .665 lift,venolia flattop pistons cut for .031 dykes rings 11.3 comp,lunati race steel crank stroked to...

hello.i have the tire an the drivers side rubing the outer fenderwell and the tire on the passenger side rubing the inner fenderwell.the tires are 275/60 15. any ideas on what the problem is or how to fix the problem? the springs where moved in but the car still has stock fenderwells.

how much HP will it take to get a 72 dart swinger into the high 11's? IM going to build a 408 smallblock its going to be a street/strip car.If you guys can give a recipe for the 408 that would be great.thanks