Search results for query: *

I have a 70 duster gas pedal for sale, asking $50.00 or BO

I was wondering if anyone has a clue as to why my 1970 Duster leaks water onto the floor boards? I am positive it is not the windshield we checked that and resealed multiple times! But I noticed when I wash the car and water goes down the cowl it just pours into the car from both sides!

can anyone tell me why my Duster leaks lots of water onto the floor boards thru the vents when I wash my car?

I made a tool for installing the clip onto the door lock out of 1/2" square tubing x 18" long. you cut a slot on the end of tube with a narrow cut off wheel so that the clip will fit in the slot, then put the clip into the slot and then hammer the end of the tube down sow that it holds clip in...

I am wanting to install some ProCar Pro 90 seats in my 1970 duster! But I am not having any luck finding some adapters. does anyone have any suggestions!

I have a question! my speedometer in my dash is rectangular in shape and every cluster that I have looked at is too. Did they make a dash cluster that the speedometer was square in shape? Classic industries seems to think so! I went to order a new dash with autometer gauges and it said that it...

my question's is, did any 1970 Duster's come with the 6 pac hood and if so did they have hinge's or not? also if they did not where did my hood come from, after-market or off a different model? what?

I just ordered a set of sport mirrors for my 1970 Duster from Classic Ind. and should have them in a few days! But I noticed that my drivers side door panel does not have the hole in it for the remote cable! So, does any one have a picture of the hole location in the door panel and some...

I have a pair of exhaust manifolds for "1970 Duster for sale" that are in great shape! I paid $500.00 + shipping for them, from Stephens Performance in Anderson Al. I will eat the shipping cost but will not sell them for less than I paid for them, So do not ask! I do not want to ship them but if...

I bought this engine to put in my 1970 Duster but went with a 360 I already had built up. I was told that it was a rebuilt engine and ran great and it shows no leaks. I have never had it apart and it came out of a running 1971 Duster with four speed. I want $2600.00 for 1970 engine, $500.00 for...

I have a 1973 Gold Duster dash cluster for sale that it is in nice condition and comes with the light and wiper switch! the only thing I saw that was bad was, one of the upper 3 screw holes is broke out! I want $150.00 plus shipping!

I have a 3.55 8 3/4 rear end that I want to know if it is a one wheel peel or a posi? I can not see any clutches but I am not sure what it is!

All I really need is one Green (male) belt and bolt. I have miss placed or lost mine for a bench seat! here is a pic of the one I have. I will buy a hole set if I have to!

does any one know what I can use to clean circuit on back side of cluster and the small contacts on light bulb sockets? petty sure that is why bulb is not working, besides being blown! will Brasso work?

Looks like my car came with dual mirrors or some one put one on the passenger side, I am not sure which, and I did not get the mirrors with the car when I bought it so I am not sure what style they were either. my question is if I buy the round type mirror with remote what do I have to do to...

here are a couple of pics! can anyone tell me if this the correct way to install trunk seal? if not, do you have a picture of correct way?

I have a 1970 Duster with 360 engine with comp20-813-9 extreme energy roller cam, roller lifters and bored .040 over and this is my first Mopar. my question is what degree thermostat should I run? I am running a 195 degree at the moment but I always ran a 165 degree in my old chevys back in the day!

if I disconnect my positive cable on Battery and engine stops, does that mean my alternator is bad or could it be something else? I am on my way to have alternator check after this post! I noticed that voltage on my volts meter was going down the longer I drove car so I pulled cable and car...

well I need help with door glass up and down adjustment! I can not get my door glass to go up high enough, it is about 1 1/4" to 1 1/2" down from seal. is there an adjustment for this and how is it done? I could not find anything in my service manual that explained this!

well it appears that I put the hardware on my glass wrong because the door glass fell to the bottom of the door, I am lucky it did not break, does anyone have a picture of how the four plastic pieces with threads snap onto door glass? I am assuming that since mine fell off, that the threaded...

I got er done!

Does any body have some pics of where they mounted there Tachometer in there Duster. I have been looking at my car and I do not see a lot of options! my car has the shifter on column!

My fuel and temp gage are not working! I looked at wiring diagram in service manual and it appears that there is a "voltage limiter" that is in that circuit for both gage's! could that be bad and causing my problem, if so, how do I check it if it is? if the limiter is bad will I still have power...

my brake light on my dash is on! does any one know what sensor or sensors would cause this? my car came with out power brake! Front disc were installed before I got the car and I have installed Rear disc along with Power Brake Master Cylinder, PV and Booster! I already depressed the switch on...

I am looking for a nice Dash Cluster for my 1970 Duster, Bill

can anyone tell me if you can run a 727 with out hooking up the kick down cable or will it mess the tranny up?

I am in need of a steering column shift lever for my 1970 Duster! I bought a lever from some one in Florida only to find out that the retaining pin hole is to big (1/4") the hole in my column looks to be only 3/16" does anyone have what I need?

my question: is there suppose to be an inner fender well clamp that holds heater hose's in place or do the just lay there and if so does anyone know who sells them. I do have the two aluminum straps that go on them already! Also if a clamp is used I do not see any hole to use on top of inner fender?

I have a leak on one of my water pump bolts that hold the alternator bracket on! I read the service manual and it does not say to use RTV on bolts upon assembly. my question is should I use RTV on bolts or do I have another problem that I am not aware of that is causing this issue?

I have this V8 radiator and shroud that will not work in my 1970 Duster! I am lowering the price to $85.00 plus shipping! The core is about 25 1/2" wide. x 22" tall and 2 1/2" thick at the top the mounting holes are about 28" wide