Search results for query: *

I have a rust free trunk lid in California. It came from a little old lady 4 door 20 years ago, gold color.

lots of c bodies had them ‘71 and up. Try over on their site.

i have curious yellow Duster 340, 4 speed 1971 project for sale near Berkeley. Greg 510-367-1250 text is best.

Can you call Andy with your axle info, he’s doing the work on the neighbors car. 415-388-1981

She has a 1965 Dart, needs drivers side axle shaft. Thanks for the info guys.

An elderly neighbor needs a 7 1/4" axle for her car. Does anyone in the SF bay area have a parts axle from an 8 3/4 swap, or from a broken ring and pinion? I can drive local to pick up the whole rear assembly, or just the drum, and axle shaft. I think up to 1972 should work, its the...

i used it on a '64 fury 361 that had an 8" freeze crack in the side of the block. it worked, but you have to make sure there's no anti freeze left in the cooling system. Flush the block out really good after it has run.

I just thought I would put this out there. Found this 30 over 340 block at a swap meet in Sacramento Ca. FW340P31880245

Those plugs are not worth much, the same plugs are on the rear cover of all 71/4" rear axles for filling the rear axle. They are worth about $3 each at most.

I picked up a 392 last year, so in looking around on older Hemi sites, I found out some interesting things . There are lots of adapters out now, for the extended bell housing blocks. So most can be used in hot rods. Any Hemi will look good in an old open hood car, I don't know what it's worth...

She has a slant that broke a piston, i was hoping someone out there has one sitting in the corner of the garage after swapping a V8 into their project.

An older retired neighbor has a 60s dart that she has had for many years. Recently her engine lost a cylinder and it runs really rough. If anyone has done a V8 swap nearby and has a good running slant taking up space that they could sell to her for an inexpensive price please let me know. I...

I have an NOS left taillight lens. I got it in a tattered box. It has one chip on the flange where it mounts, can't be seen when installed. $80 + shipping from 94804.

From my experience I would say Stay away from the DMV office. I bought a '78 Ford F-250 4x4 just because it had a 4 speed and both front & rear Dana 60s. I asked the DMV clerk to check the status. She told me that I owed back fees to 1994, and that total was $1710. I asked if these old vehicles...

Pats-73

I just went through this with a slant '72 swinger. I bought a '75 swinger with a dead 318, and dented body panels. I used the k frame, disk brakes, drive shaft, radiator, sway bar, engine brackets, and 81/4 rear for the '72. It's so easy to make the swap when you have every nut and bolt needed...

I have a grill in Richmond. $275

i have one near Oakland.

I have a couple of slant 6 radiators you can have one for free, if you make the drive. Im near Berkeley just off of I-80.

I've got one you can have for free, if you make the drive up near Berkeley.

I sold this car last month.

pm sent

The kick down linkage for a slant is very simple its only 3 or 4 pieces. In your photo you have the shifter linkage, that piece attaches to the frame rail and a bracket on the transmission. A service manual will show you in detail how everything goes together. I have the complete kickdown for a...

At the Richmond Ca. Pick-n-pull an eighties turbo in pretty good shape was set out in the yard. It looked like it was parked for a long time the silver paint was toast..I saw it 2 months ago right after they put it out, then went back a month later and it looked the same. Nobody needs parts I...

PM sent.

Years ago I bought a '71 Newport royal for the 360 engine. The oil light flickered at idle, when I pulled the engine I found that the nylon timing gear all chewed up. Pieces of nylon blocked the pickup and then the screen failed at one side. I found pieces that went through the pump gears and...

Nice circle jerk you guys got going on, maybe you can all get a room together at the nationals. You people just love to stroke each others egos.

Ed has always been easy to deal with, if he steals your money start a thread about it. You guys just have the need to make some drama about your tiny issues. The op posts on a public forum and wants everyone to pat him on the back for saving them from the sinister, evil parts dealer. If you...

Running my mouth…HaHaHa, you're showing how much you whine, again! Like I said save this crap for people who steal your money. I don't care if the shipping takes a week or two, I have other things to do to keep me busy. I don't sit on the porch waiting for a package to show up. I would have hung...

Ed is the only reproduction parts guy i will buy from. i think you just like to complain. So you have to wait a week, like it's going to stall your restoration? These types of posts should be about people who steal your money, not someone whining about delayed shipping.