Search results for query: *

Brand new Rev-n-nator ignition control box with built-in adjustable rev limiter along with all of the original paperwork. Per the manufacturer: "The REV-N-NATOR is a true plug and bolt-in factory-appearing I.C.M. (aka Brain Box) that has been completely re-engineered with digital technology. It...

1973 Dodge Dart Swinger. Fully restored (not numbers matching), ready to drive. Less than 3,000 miles on it since the restoration. Here is a video I took (as the car sits now): Originally a slant-6, I installed a rebuilt 340 (1971 block, best year) with an A833 4-speed transmission (non-OD)...

1973 Dodge Dart Swinger. Fully restored (not numbers matching), ready to drive. Less than 2,500 miles on it since the restoration. Here is a video I took recently: Originally a slant-6, I installed a rebuilt 340 (1971 block, best year) with an A833 4-speed transmission (non-OD). The engine...

Listing my rear end parts for sale. I purchased these all separately to go in my Dodge Dart, but didn't end up doing the conversion. The parts are as follows: -8-3/4" rear end housing from a 1968 Roadrunner. Will fit perfect in a similar vintage B-body or a later style A-Body with deeper...

Hello all. To make a long story short, I'm losing my garage space for my Dart sometime over the next few months and I have a newborn son and not enough time on my hands, so I'm trying to make the responsible choice. Up for sale is my 1973 Dart Swinger. It's freshly painted in B5 blue and is...

Hello all. To make a long story short, I'm losing my garage space for my Dart sometime over the next year or so and I have a son on the way, so I'm trying to make the responsible choice. Up for sale is my 1973 Dart Swinger. It's freshly painted in B5 blue and is painted semi-gloss black...

Hello all. I've been trying to diagnose a drivetrain vibration that I've had and I think I've narrowed it down to the pinion angle. The vibration only occurs >50-55 mph and gets worse with increased speed, so I know it's not RPM dependent. I took it to a local tire shop and they test drove it...

Hey all. Went to look at a truck last weekend and wanted to get some input here, since I know you're all Mopar nuts and a fair few of you have owned a mighty Cummins pickup. The truck is a White 2002 Dodge Ram 2500 4x4 with the 5.9L Diesel and an automatic transmission. I confirmed that he has...

I have a used set of J-heads that came off of a low compression '73 340. They have 73cc combustion chambers (checked them myself with a medical syringe), but they have had the larger 2.02" intake valves installed, and the stock size 1.60" exhaust valves. They also have aftermarket springs with...

Hi all. This isn't A-body specific, but it is Mopar. I have a 1972 Roadrunner and I'm looking for some advice on a rebuild. And I could use to vent. My Dad and I restored the car when I was younger and it's been on the road about 8 years now. It has a 400c.i. HP motor, fairly stock, 0.030...

Looking to buy an antenna base assembly with the bezel and the antenna cable going to the radio that will fit my 1973 Swinger. I can't seem to find the one I had, so I'm wondering if anybody has any extras sitting around. I would need the part shipped to North Smithfield, RI (02896). Thanks...

Up for sale is my Holley model 3310-3 4160 style carb. It's a vacuum secondary carb rated at 750CFM and the choke assembly was removed by the previous owner. The carb was completely disassembled and rebuilt 8 months ago, but I didn't check the jet or power valve specs because it was on the...

I payed to have my power steering box rebuilt prior to swapping my car over to manual steering. Now it's taking up space and needs to go to a good home. The steering box came out of my '73 Swinger and I bought the kit and paid a local shop to rebuild it. All of the splines are good. I can't...

I ended up installing tubular upper control arms on my Swinger after rebuilding the ones I had, and I haven't had any issues, so I figured I'd list these for sale. They both came off my '73 Swinger. I sanded them down, sprayed some rust-converter primer on them, and shot a single coat of...

Looking to see if this makes sense to everybody else. When I was building my car, I bought a mystery 340 which turned out to be a pretty hot motor. It's got a pretty aggressive solid cam and a single plane Holley Strip Dominator intake. I have headers on it and a nice free-flowing exhaust. The...

I don't know if anybody is watching the news but no less than 3 bombs were detonated at the end of the Boston Marathon. It's really disgusting what people are capable of. I hope the friends and family of everyone here are safe. My thoughts and prayers are with the victims and their families...

Hey all. Up for grabs is my Dad's tractor. We used it mostly for mowing the lawn and moving dirt, and it works great. We're just selling so that we can buy the next model up and mount a snow blower on it lol. Becoming quite a necessity after this past winter. See the ad below and PM me with any...

Looking to thin out my extra parts here, and have not heard anything back from anyone regarding it being the motor for their car, so I'm looking to sell my extra 1973 model year 340. I have not had a machine shop inspect it due to $$$, but I did perform my own measurements with my digital...

Does anybody know where to find the clips that hold the door lock cylinders in the door panel? It's a c-clip unit about 1" or 1-1/2" in diameter. I have one and can't seem to find the other one #-o Thanks all for looking. -Mike

Does anybody have the chrome trim for the front "beak" panel above the grill for a '73 Dart Swinger? I believe the chrome trim from a '74 will fit as well, but in '75 they changed (i think). I need it to be as straight as possible, so minor pitting is acceptable, as long as it's not dented. I...

Thank you all for viewing. My cousin has a 1995 Ford F-250 pickup with the 7.3L Powerstroke Diesel motor. He bought it used, and it was previously used/maintained as a fleet vehicle. He was driving home Monday and the truck started to stumble and eventually died. He changed the fuel filter on...

Hi all. I'm looking for a chrome Driver's side remote mirror to fit my 1973 Dart Swinger. I don't need it to be perfect, but at least driver quality. Shipping would be to North Smithfield, RI (02896), but I'm sure it would fit in a $15 flat rate box (or maybe smaller). Let me know what you...

I have a glass guy coming tomorrow to put the front and rear windshields in my 73 dart swinger. I ordered the new gaskets and the new trim clips from Dante's and I'm re-using the old glass which has been cleaned and is ready to go in. This is my issue: The trim clips for the rear windshield...

I am currently working on a hydraulic clutch system for my dart. I have been crunching a lot of numbers to make sure everything works right and I had a thought. Is there any interest in creating a new forum section for technical calculators that could be used for common custom projects such as...

Hey all, Thanks for looking. I know this is non-Mopar, but this is the brightest group of people on a forum that I've ever been privy to, so I'd like to start here. Also, some guys here do run a Ford 9", so it may help them later on. So here's the story: Last night after finally getting my...

Does anybody have a 1/4", 3/8", and/or 1/2" carb-to-air cleaner spacer laying around? I believe the diameter would need to be ~5-1/8". Needs to fit a Holley 3310 series carb. My Spectre Performance drop-base air cleaner interferes with my jegs throttle linkage return springs. Yes, I know that...

Hey all. I'm getting ready to re-install the front and rear windshields in my '73 Swinger but i'm having a hard time finding consistent information online. I work days, or else I'd swing by a local windshield shop and chat them up to figure out what exactly it is that I need. I was wondering...

Im looking for a driveshaft for my '73 Dart with an 8-1/4" rear end and an A833 abody four speed. The one i have is about 3" too short. I think it came from a duster or demon with the same drivetrain. Does that make sense? Looking to buy asap. Let me know what you have. Thanks. -Mike

Hey all, I'm looking to get my car on the road ASAP and I figure now is a good time to get a new/rebuilt carb. The one I bought a year ago showed up with fuel in it, and it's been a year of sitting in a dusty garage, so I'm sure it needs a rebuild. The one I have is a Holley 3310 750CFM with...

Disclaimer- This is not an A-body, but it's a big block Mopar (72 Roadrunner with a 400/727.... close enough? Hope so. It's really bumming me out. I guess I'll start this one from the beginning. I was driving my Roadrunner one night around 10:00pm and came to a light on the highway next to my...