Search results for query: *

Looking to see if anyone has used the Wilwood Disk Brake kit. 140-2713, This is the only kit that I have found that comes close to the stock Kelsey-Hayes 1965 disk brakes. The stock rotor is 11.04 inches, this kit is 10.75 rotor, hoping it will not hit the a 14inch wheel Barracuda wheel...

1963-1966 Dart Valiant Station Wagon Bumper Brackets must be station wagon all other models are to short. Thanks Rick

Hey gang, just got a 63 Dart Wagon starting to get it going. Need a Carburator Kit for a Holly 1920 12R-4328-B. Can't seem to find the 4328 model anywhere. Any suitable subs? It has the flat shaft accelerator pump. Anyone Running that new Daytona Carb? Thanks in advance.

ISO 1963 Dodge Dart exterior trim 270 model. Both rear tail light lens' rear cargo area trim (all pieces that cover the c pillar to headliner) Also any and all parts that someone may have for these cars (your parts maybe better than mine) Roof Rack

Welcome to Mopar Madness 2020 Mopar Madness November 8, 2020 8am to 3pm We hope to have a great show this year at our new location at Hall Chrysler Dodge RAM Jeep in Chesapeake just off of Interstate-664 on Bridge Rd, map and locations below. This will be a partipant Judged show with two...

Anyone ever install a headliner in an early A-Body with the glass in it? or are there other options?

Who is going and where are your coming from? Leaving Thursday 0500, SE Virginia.

No not wench! So my driveway has a slight grade to it. As I am getting ready to do alot of dirty work on my 65 Valiant I thought I would like to get it outside. So I picked up a 3500 Badlands winch, mounted it to a steel plate, put in 3/8 3inch long "redhead" fastners in the concrete, and out...

All, Well I am at my wits end with Imperial Services! Its been 5 years and I have been waiting for my 65 Shifter adapter to 66 and up transmission. I actually had some contact with him 2 months ago and was hopeful but now its gone again. Does anyone have a converted shifter that I could get...

Does anyone have any pictures of how a 66 automatic steering column is routed or connected? I have a 66 Dart service manual so that is not an issue, but pictures would be great. Thanks in advance Rick

DO NOT USE IMPERIAL SERVICES!!!! For all my Mopar Friends that have an impending order with Imperial Services I have come to the conclusion that they are out of business. I have contacted PayPal and I have gone over there 6 month policy on refunds, (only because Imperial said it would take 6...

Ok folks here are the results of the RAM MAN disk brake conversion on a 1964 Plymouth Barracuda. Car started out with Power Brakes 9 inch drums. 14 inch 5.5 rims What you get in the kit is everything needs to complete the conversion. Everything is from a 76 Dodge Dart system (brand new)...

Fellow Early A Members, I am building a 65 Signet. Later model drive train 73ish, I want to put a 66 Barracuda console in it as I put in a 66 dash, however they are hard to come by. But 67-9 are not that hard, does anyone know if 7-9 will work? The bell crank and shifter rods look very...

Anybody ever use later model hood hinges on an early car? My 65 has a slight bent torsion rod so the hood sits and closes all messed up. Can't really find it, car was hit before I got it and Hood was bent up.....

Ok folks I just did the brake conversion on my car here is the outcome. Started with, 1964 Plymouth Barracuda, all stock 9 inch drums single master. Ordered from RAMMAN Early A Body kit. 76 Dodge Dart Sliding Caliper. Removed as a complete unit the drum assembly, remain upper and lower...

Ok guys, if you have an early A I just did something I should have done 30 years ago. So I have had some issues with the old style kick down linkage clips popping off the bell crank that connects the rods. See picture. Well coming home from Carlisle the car didn't shift quite right and I had...

Ok gang here is my issue. I have a 65 Signet it was in an accident hit in front, sheet metal replaced, frame is straight. However the torsion bars have been tweeked for the hood. So I was thinking can I get 67 hinges to work if I weld in a support for it? Anyone know anything if I can do...

Anyone have a spare Formula S Disk Brake master cylinder and proportioning valve? Looking to make my disk brake conversion authentic. Also if you have a Kelsey-Hayes set up and don't have this master, how are your brakes? Curious about the extended reservoir if its really needed or not.

Anyone have an early disk brake master? Looking for the extender.

I will convert transistor radios to AM/FM 180watts RMS 4 channel. My background is Aviation Avionics US Navy 24 years. I was getting tired of having two radios in my car, last Carlisle I saw a converted radio and thought it was pretty easy. I have one in my own car and love it. I used a...

I am starting my own Business Converting transistor radios to AM/FM 180watts RMS 4 channel. My background is Aviation Avionics US Navy 24 years. I was getting tired of having two radios in my car, last Carlisle I saw a converted radio and thought it was pretty easy. So I became an Aurora...

Need some help guys; 1964 Barracuda 273 Auto. Ok my original gear box was leaking all over for a while, classic industries has them so I picked one up. My problem is after I finished I followed all of the directions, filled up the resviour undid the coil wire, took the return line off the...

All, Just got my originial knee knocker A/C system back from Classic Auto Air, they did a great job. The only issue is they sent it back all stock instead of converting the Compressor over to 134, I have been told I need to remove the EPR Valve so it will flow better. I have been told two...

All, Just got my originial knee knocker A/C system back from Classic Auto Air, they did a great job. The only issue is they sent it back all stock instead of converting the Compressor over to 134, I have been told I need to remove the EPR Valve so it will flow better. I have been told two...

Well another good weekend at the Redneck Garage, working on the 64 Barracuda, I was able to remove the old power steering gearbox and install the new one. I took the boat anchor starter out and have a mini-torque to go in. I managed to take out the shifter cable on the first shot! HERE IS...

Anyone of my car buddies use Imperial Services for shifter cables?

Anyone have any part numbers or what type of brake proportioning valve and location for disk brakes with dual reservoir master cylinder? Building a 65 Signet, the valve was up on the fender well when I got it, moved it down on the rail but it looks kind of tight down there.

Anyone know of any early Mopar yard in south Florida?

Just picked up a set of seals and gaskets for my 64 push button transmission. Any one have and hints tips and pitfalls?

I to have a discharging problem when anything like the lights, blower, wipers are turned on. I have read some of the posts so here is my story; 1964 Barracuda 273, 2bbl. A/C, P/S, P/B, Intermittent wiper, radio. Readings so far, key on, motor off; Battery 14.1 Alternator B=14.2...