Search results for query: *

In need of about 24-30 inches of the front half of a clean A-body right side (passenger) rocker for a '69 Cuda project I'm working on. Needs to be pretty clean original or left over AMD section. No rotted or smashed stuff please. Could also use the dual exhaust notches from the rear valance of...

Searching for the original 6bbl 727 from my 1970 Sport Fury GT VIN# 0F144031 Last know location was northwest Pennsylvania so good chance its somewhere in the NY/PA/OH area. Would also be interested in any other PK3410672 coded 1970 6bbl 727 transmission with a VIN sequence of 0Fxxxxxx ...

Searching for the original 340 & 727 from my 1972 Demon 340 VIN# 2B443447 Probably somewhere in the northeast NY/PA/NJ area. Thank you, Charles

Searching for the original 340 & 727 from my 1969 A56 Cuda VIN # 9B432942. The car was in South Jersey about 12-15 years ago but I have no other history prior. Thank you, Charles

Searching for a couple Mopar Performance M1 LA small block dual plane intake part #p4532059. Looking for two of them. Any condition as long as the head surfaces havent been milled. Will consider other variations of the small block M1 dual plane. Thanks!

Searching for a Strange Engineering aluminum 8.75 35 spline spool. Part # D1566. Only interested in the spool itself. Good used is fine. Thanks, Charles

For a 416+ cube stroker making 500hp +/- 50 Which is better from a performance stand point? The dual opening, snorkeless '71 unit? Or does the trap door '72 unit flow more?

Looking for an RB M1 dual plane intake manifold part # P4532063 / P4529118 to finish buttoning up my '70 SFGTs 440. Nothing damaged please. Thanks, Charles

Looking for one of the Mopar Performance P4876445 aluminum center section. Bare housing or ideally with 3.91s-4.30s gears and 35 spline spool. Thanks!

Looking for late A-body 340 ('71-'73) exhaust manifold cores to port. Date codes not important, just the correct casting numbers: #3418623 (passenger) #3614368 (driver) Cheaper the better. Can meet up within 2hrs of lower NY/NJ/PA/CT area or meet at Carlisle in July.

Looking for good stock '70-'72 915 J-head cores to play around with and modify. 1.88s (preferred) or 2.02 valves is fine. Closer to the NY/NJ/PA/CT area the better (within 3-4hrs of NYC), but can also meet up at Carlisle this summer. Thanks, Charles

Searching for the original 340 block & 4 speed for my fathers Swinger 340 vin: LM23H0R290499 / 0R290499 Thanks!

Building my '72 Demon 340 to run in the FAST series racing. Looking for the following parts: Carb: Thermoquad #6139S {Automatic Transmission} Intake: #3614025 Exhaust: #3418623 (passenger) #3614368 (driver) Thank you, Charles

Looking for a complete set of the old DC/MP porting templates for big block iron heads. Going to be cleaning up the original 906 heads to my SFGT. I know the PDF file is out there but I'd prefer to have the original. Thanks, Charles

lmfao!!!!!!! https://www.youtube.com/watch?feature=player_embedded&v=-e5w64ueVKM

I was changing the thermostat in our '70 Newport 383 cause it has a slight overheating problem and the head of the one bolt under the A/C compressor snapped right off :oops: I got the thermostat off but now I have the broken bolt to deal with. Any got any suggestion as to how to remove it...

Well I would have post this sooner but I did't want to post without pictures.... So back in June-July my father and I were driving through a neighboring town when we spotted this little (sarcastically speaking lol :toothy10: ) jewel. A '71 Newport 4 door hardtop. After dreaming about the car...

Well its been a long 12 years in scouts but last night I finally earned the rank of an Eagle :cheers::cheers::cheers: They say I'm 1 in 100. My project was to build a 160ft fence for the kindergarden class at my church. It came out great! I'm a 17 year old senior in high school and have been...

I have the chance to buy a 472 Stroker cank fresh from the machine shop for $250. Is this a good price??? I was told he has $400-$500 into the machine work alone. Thanks

I have the chance to buy a 472 Stroker cank fresh from the machine shop for $250. Is this a good price??? I was told he has $400-$500 into the machine work alone. Thanks

I plan on eventually mini tubbing my Valiant but then how do you route the exhaust. Will it clear or????? Does anyone have a picture of what they did? Thanks

Which side would the leaf spring with 6 leafs be on, drivers or passenger ](*,)

I crackedback recently informed me this is for a 318 A-body. Kinda bummed that its not a 340 manifold. :-| Any ways it'll fit 273, 318, 340, and 360 engines. Looks to be in nice shape as theirs no cracks or chunks out of it. How's $40 plus shipping sound? Located in Orange County, N.Y.

I'm replacing the battery terminals on the '70 Newport and the Barracuda. I just finished doing the Newport and started on the Barracuda when I noticed that there is only one ground wire to the engine. I looked and both our Newport's have two ground wires, one big one to the engine and one...

Will the leaf springs for a '69 Dart fit a '65 Barracuda? (Later A springs in an Early A) Thanks

Are '73-'76 drum brake upper control arms large ball joints? Thanks

Have a nice drivers side manifold thats correct for an A-body '71 '72 '73 340. Will work with other years and other small blocks. No cracks that I can see. Bolt holes are fine. The numbers on it are 3614395 N2 D<N E2 72. Casting date is May 2, 1972. Price is $130 plus shipping from Orange County...

Looking to buy a clutch kit for the 9 1/2" flywheel used in early A-body cars for a 273. I think its the same clutch for a /6. It can't be a used one and needs to include clutch, pressure plate, throwout bearing, and alinement tool. Just want to get our Barracuda drivable as the clutch slips a...

Are the stock starters the same for all engines? example /6 starter bolt to a big block? Thanks.

Well lets see who's the youngest member on FABO. I'll go first. I'm turning 17 in August and September I'm goig to be a senior in high school. :mrgreen: