Search results for query: *

Hey, can someone tell me if I'm putting this thing in the correct direction? I have the crossmember mounted with the open side to the back, but now the bolt holes to the transmission is too far forward (it seems the trans it too far back?) let me know your guys thoughts!

I have a 318 with a 340 crank in it.Since the 340 crank is internally balanced, would a 318 harmonic balancer work? Or is that a bad idea?

Hey guys, I'm looking at a 340 4 speed Dart swinger. It's all factory with numbers matching engine and transmission. I dont have pics (SORRY) But it runs and drives with only one repaint. What do you guys think its worth?

Well, I was driving my Dart last year and started to notice the passenger side was sitting low. Then I noticed the whole front was kind of low now. I crawled under the car and the drivers side is .25" from the bump stop and the passenger side it just sitting on it. Passenger side has the...

I am listing for a friend, send me a PM if interested. 69 GTX 440 auto. Has 440, Not original engine, and no trans. Yes it has a lot of sport satellite stuff on it, but it's a real GTX. Had a Dash fire at some point in its life, but comes with a replacement, see pics below. 1970 Road Runner...

Hey guy, I have a buddy who found a spool mount transmission crossmember in his stash of parts. But thing is, he normally deals in E and B body stuff. How can I be sure it's for an A body and not E or B?

Hey guys, I have a friend with a 1970 Charger R/T. He says if his battery is hooked up his wiper arms will sit there and kind of twitch repetitively. I said it's a bad switch, but I want to know what you guys all think? Thoughts?! I appreciate it!!

I'm listing for a friend, PM and I can give you his phone #. :) 1969 Dodge Dart GTS. It was originally a 340 car, now has a 400 big block and a 727 transmission and an 8 3/4 rear end. The engine and transmission have been rebuilt and are ready to run. The body work has been completed and is very...

I am selling these for a friend, 1970 Automatic 340 six pack complete setup. All carbs and intake are OEM correct. $4,000 1970 340 4 speed aluminum bellhousing. $500 1970 Automatic 440 six pack complete setup . All carbs and intake are OEM correct, even still has the stop idle solenoid! $3,500...

I have for sale a set of PRW stainless steel roller rocker arms. They are for 273-360. They are used, but are in good working condition. They are missing the mounting caps, but I see no reason why stock mounting caps wouldn't work. I have more shims than shown in pics. Asking $375 plus...

So I picked up this air cleaner earlier this year and now I'm thinking about selling it. I cant find anything on the internet on gold Holley air cleaners, ebay shows nothing, google image search show nothing. It's the small one, NOS. Never been installed, and the cleaner is just absolutely...

I saw this the other day. Messaged and found out the price is $500 for the car with clean title. Top works and moves with motor. He said frame rails would need some work and would send me better pictures of that. No clue on the engine though... A lot of work.... Is it worth taking on?

Can someone reccomend a transmission mount for a 72 dart? I bought one from oriellys and it was taller by about 3/8 or better. I figured my old one was compressed a lot (even though it didnt look it) so now I hear some harmonic noises from the engine and would assume the transmission is pushed...

I'm trying to help a friend locate a 71 340 engine block, short block or long block. Is there anyone on here near southwest Missouri who has one they want to part with for a decent price? I appreciate it! Thanks!

Hey, someone I know has a 318 from a cop car. They said this 318 was a hot moter in anything they put it in. Said it has more power than the 360s they had been using. I took pics of the heads, anything special about these? Wasnt able to pull valve covers, didnt know if the letter /number mean...

So I bought this at a flea market for $10, after a little google image search i was pretty sure it was a late 90s high torque starter. Can someone tell me for certain if it is? (And I didnt waste $10) Thanks guys!

I had someone tell me that the M1 dual plane intake was about the best performer on a small block Chrysler. What's y'alls thoughts? They dont make this intake anymore from what I understand, and they are pretty pricey used. Thanks guys!

Hey guys, I've been running my dart without a hood to cowl seal. Noticed the other day the hood was rubbing some paint, so I ordered the hood to cowl seal. This thing shows up with some small metal clips. Does anybody know how to install those with the weather strip? Thanks guys!

Has anybody installed one of these on an Abody? Says 8" depth, which I assume to be the height. Sounds like it might be too tall for an a body. Let me know what yall think! Crosswind Mopar Dual Plane Carburetor Intake LA & Magnum -Satin

I put a square bore carb(carter AFB) on a mid 80s dual plain spread bore. I had someone tell me putting a square bore carb on a spread bore intake would hurt performance, and just generally would not work as well. Is it okay to put a square bore on a spread bore intake?

Does anyone have a windshield lock strip for a 72 dart they would part with for a reasonable price? Thanks!

Is it possible to install a new master cylinder without bleeding the whole brake system again? Just curious, thanks!

Seriously folks, hop on FABO and you can sell, buy, trade, ask questions about anything and I have yet to find someone who isnt willing to go more than a little out of the way to help a fellow mopar guy! It just can't get better, best place to hang out on the internet! Does anybody else love...

Okay, so this topic has been discussed a ton. But I have stock rallye wheels on a 72 dart. I was young and dumb when it came to tires and I bought 205/60R14s for this car. Just sits the car way too low. So, can I fit 225/70R14 on the car? They seem to be the right height. But will the front...

Okie dokie, So I am needing to get some funds together to purchase some parts for my dart, and I thought heck, I have several Dart parts laying in my garage, let's do a garage sale! Steering column cradle, $20 +the ride.(SOLD) Hood latch: $10 plus ride. Lower dash. (See pics for cracks) $50 (...

Okie dokie, So I am needing to get some funds together to purchase some parts for my dart, and I thought heck, I have several Dart parts laying in my garage, let's do a garage sale! 68 Dart tail light lenses, one has broken tab, can be seen in pictures, very much fixable. Asking $20 for the...

I have for sale a manual steering box and pivot arm from a 68 dart. The box feels very tight, nothing is loose. DOES need a bath, but otherwise it's ready to go. Asking $135 shipped to your door in the USA! PayPal is my preferred method. Please let me know if there are any questions! Thanks FABO!

Does anyone know where to buy cheap leaf springs for a 72 dodge dart? I think I want stock spec springs, but the idea of a stiffer rear I kind of like. I just heard people say the super stock springs will beat up your car pretty bad... any thoughts? (P.S. this is just a cruiser, maybe...

Does anyone know the torque specs for the ball joints in a 1972 Dart? I got the new ones in, but am afraid to strip out the threads over tightening... Any help would be appreciated!! Thanks FABO Family!

So i took my dart out for a spin. After parking it I kept smelling what i thought to be gear lube. I looked under the car and nothing was dripping. Came home and after it being parked for s few days gear lube had leaked out of the drums and down the inside of the tires. Is the seal that needs...