Search results for query: *

Looking for the frame that holds the gauges, speedometer, etc against the plastic bezel and screws to the main dash frame. I don't need anything else (like gauges speedo, circuit board etc), just the metal frame. I'm doing a custom gauge set so paint wear is ok. Prefer intact, unbroken and not...

I know some folks here part cars so I figured I'd ask for my Dad. He has a 1966 Coronet 500 missing the ash tray (since the mid 80's when we got it) and all the hardware to attach it to the dash. Color doesn't matter as he is painting the dash. Thanks!

New, unused and never installed New Holley Quick Fuel Brawler 670 CFM Carburetor. I bought this in the Spring of 22' and never used it, went EFI. $420 OBO. Only out of the box twice, one to verify its what I ordered and second for pictures below. Comes with unoppended bag with gasket, manual...

For all you 273 and Valiant guys. It's interesting what gets dug up from time to time. Unearthed: 1967 Plymouth Valiant 273 Commando 4-Speed

All prices are OBO plus shipping. PM with any questions. Will not ship to Canada, sorry to much customs BS. Tips off my 69 Dart GTS, these are re-pops in Stainless. I cut the ends off but will include them if you want to weld them back on. See pictures. $SOLD 18" Summit racing flex fan part...

Hello All, so I finally got my GTS on the road and I'm now able to tune it. Been reading and playing with the carb (Quick Fuel 650 SS, Mech Secondary) and had a really bad lean stumble just coming off the clutch. The slower the leaner then it would catch up (I have a wide band o2). Installed 67...

FYI. Center load design for older cars and to limit tunnel mods. The New TREMEC TKX - American Powertrain

Hello, looking for a set or one side. I think they use 6 or 8 per side. They look like below. FYI these are not the clips that hold the bows or to help hold the headliner. These clip the trim in that runs from the back seat to the front windshield. 67 to 70 might interchange. Newer ones seem...

Yay! Since most of these panels are bent, dented, trashed around the key hole, twisted and expensive to get a fair one and pricey to restore you now have an option. Hopefully its a quality piece. Not sure who else sells these, I happened upon this one...

I bought this one by mistake. New and never installed. I figured I'd sell it instead of hassle with returning it. Hoffman Winners Circle is the MFG. $180 shipped FedEx ground in the US. 2785614 or 2785 614

FOUND!!! Hello all, I'm tired of using wood blocks so I'm installing my parking brake lever. I'm missing the two parts circled in red below (clamp and Pin), if you have the nut and bolt is yellow that would be great too. Hell, I'd take a nice grommet if you had it too. Shoot me a PM with what...

Getting ready to fire the 340, threw some new antifreeze in and after several days sitting (no run time at all) I have a leak at one of the two lower most bolts on the drivers side of the timing cover. I have not take in apart yet but looking at pictures it looks like the very bottom one by the...

Out of my 69' Dart. Standard ratio, clean (dusty from sitting), repainted black (some is coming off). Comes with correct mounting bolts and pitman arm. $100 shipped within the USA. Thanks, Dan

New Gates 5.7 Hemi water pump Part number 43543. Still in box and bagged with gasket. Bought this for my Magnum R/T several years ago, sadly the car was rear ended and totaled. $30 plus shipping.

I have a very Clean used Holley 650 CFM Double Pumper 4777-5. All stock and not modified as far as I can tell. I bought this and decided to run a Quick Fuel 650 instead. I have not ran it but took the bowels off and all the jets are box stock and very clean inside. Looks to have been used very...

New NOS Cloys Street True Roller for LA SB circa 1997, Part number 9-1103. Has very light surface rust from sitting on my shelf in the garage. Chain is really clean, most surface rust is on the sprockets, no pitting. $40 plus shipping. Images are of what you will receive. From Summit "Cloyes...

Hello, I have a set of Polished Holley Finned Aluminum valve covers for SB LA engines., I bought new circa 1996. These are factory polished not black wrinkle ones that were polished. Polishing needs brought back out but otherwise sound, no cracks. No Baffles or grommets. $100 plus shipping.

Circled in the picture below is a "Typical All" detail showing a seat belt bolt and washer and no seat belt. What is this trying to say? Is that a metal washer or anti-vibration washer? Does it go between the bolt head and the belt or the belt and the body? This is what I'd call a "All detail...

Hello All, I'm looking for a Saginaw pulley with the key way for 70-up LA Engines (not the newer press on type, I have one of those). I just need the PS pulley, I have the correct crank pulley. PM me with what you have and shipping to 97080. Can pay with Paypal. Thanks, Dan

Hello all, I need some seat belt bolts, 2 of each marked C10 and C11. Will buy complete set if need be. Prefer rust free and good threads. PM me what you got and how much shipped to 97080. Thanks! Dan

So I have my interior out right now and would like to run speaker wire to the rear. Can I run a pair down the passenger side or do I need to split them passenger and driver? I'm also going to get kick panel speakers. My deck is a RetroSound Redondo and is 4 channel. Any suggestions for rear...

Hello, I have a set of Polished Holley Finned Aluminum valve covers for SB LA engines., I bought new circa 1996. These are factory polished not black wrinkle ones that were polished. Polishing needs brought back out but otherwise sound. No Baffles or grommets. Will post pictures later. $100 plus...

Hello, I have a Black floor shift column out of my 69' GTS and manual box. Everything works great, converted to Power and a Tilt column. $300 plus shipping (would prefer not to ship to Canada). I will upload pictures soon or PM me your email and I can send them to you. You get: Column with...

1969 Black A-body floor shift steering column for manual steering, comes with coupler and rebuilt kit for it and new turn signal cam. Had had a wiring repair but everything worked fine on my car. repainted black, come with floor plate but not the clamp to the dash. Shaft is not collapsed and...

All prices are without shipping. I do take PayPal. Pics on request, I plan to upload some soon. Manual Steering box standard ratio, pitman arm and bolts $100 Power steering shaft and coupler for steering column. Pins are not sheared $50 11-3/4" disk brake conversion, ready to bolt on...

Regardless of what I use (still TBD) I'd like to coat my front inner fenders wells. I'm at least going to coat the inner shield(s) that seals the fender as they were stripped and painted. From what little driving I've done I see a lot of rock chips so I 'd like to protect this area. Do the inner...

So I 'm installing a set of QA1 adjustable on my 69. I understand what their job is and have no binds but.... Install step 4 says " Cycle the control arm though its full motion to insure there is not any binding in the front mount or the rod end and adjust the front mount as necessary. Once...

Anyone use or sat in TMI Pro-Series Seats especially if your over 6' and have a 40+ waste.

OK, so I got my Hughes rockers and stuff and I'm cleaning the insides of the shafts (yes I read the directions...) and they are filthy inside. Right know I'm using a brass 12 gauge bore brush and Simple Green. Seems to be cleaning OK but I though someone might have a better solution? Steel bore...

Rebuilt with Energy Suspension bushings and very low mile ball joints (under 30 miles, yes thirty) and new Energy Suspension ball joint boots. Ball joints are still very tight and made in the USA. I consider these ready to install and grease. They were sand blasted and paint black but some of...