Search results for query: *

Two 1970 and later style square back alternators. I have not had them tested, so consider them cores for a rebuild. $50 for the pair. Pickup in west central WI, 100 miles straight east of the Twin Cities.

Two 1969 and earlier style round back alternators. I have not had them tested, so consider them cores for a rebuild. $50 for the pair. Pickup in west central WI, 100 miles straight east of the Twin Cities.

I have 3 extra 1969 and older style oem single field alternators to sell. 1966, 1968, and 1969. These were all original 37 amp models. My rebuilder installs oem style 60 amp internals in them. Not a lot of time on them, with the 68 being the least. Bolt on and go. $225 each. Prefer local pickup...

This is a nice 2614371 balancer that came off a 1971 440 4-speed steel crank, but would be correct for other years/engines as well. 7.25" diameter and the rubber is perfect. I cleaned it up and sprayed it with Dupli-color ceramic engine primer and paint. $35 picked up in west central WI. To...

Set of 3/8" ball/cup push rods that I believe are Manley. I bought these new and ran them in a 451/Stealth heads/Harland Sharpe rockers/hft for 3000 miles. Switched to Trick Flow heads and now need longer rods. Overall lengths are between 8.302" - 8.307". Useable length looks to be 8.155" or so...

A used set of 440 Source 109-1514 12 point head bolts with washers. For factory big block, Stealth, Edelbrock, or similiar heads. I bought them new and used them for 3000 miles. Switched to Trick Flows that require different lengths. $35.00 picked up in west central WI, or they will fit in a...

440 Source heads 200-1055. I had them on my 451 for about 3000 miles. They had new valve seals put in 40 miles ago. The pushrod channels have been enlarged to fit 3/8" rods. There is absolutely nothing wrong with them. I had some extra cash laying around last fall and bought some Trick Flows to...

Looking for some with a 5.5" backspace. Must be in very nice condition. I know this is a long shot, but several years ago I sold 2 of these in like new condition at Mopars in the park when it was still in Farmington, MN. I had them made with 5.5" & 5.75" backspace. Just wondering if they...

Pair of oem axles that came out of a 1970 Plymouth Road Runner 8 3/4. Will be the same for all 68-70 B-body 8 3/4's. The one side still has left hand studs. Pick up in west central WI. $70.00.

One was taken off a 1971 440, and the other from a 1972 400. $37.00 shipping included in a USPS medium flat rate box. Friends and family only.

1971 440 block, main caps, and forged steel crank. Just had it cleaned and magnafluxed. Standard bore, no cracks. This was a manual shift transmission car, there is a pilot bushing in the crank. Located 100 miles straight east of the Twin Cities. $600.00

Set of oem valley pan intake hold downs from a 440. $5 + shipping.

3614371 balancer off a 1971 440 4-speed forged steel crank car. 7.25" diameter. I believe this was this first one to have a symmetrical bolt pattern. Rubber is very nice. I cleaned it up and painted it Hemi orange. $35 plus shipping. Friends and family only.

Pair of brackets of a 71 440. I blasted, primed, and painted them black. Not perfectly smooth, but not terrible either. Used on 66-72 B, 70-74 E, and 66-73 C bodies. $40.00 shipped in a USPS small flat rate box. Friends and family only.

I had Steer and Gear rebuild a manual box back in 2011 for my 69 Road Runner. In 2020 it started getting a bit sloppy. They told me to send it back and they would take care of it. They were extremely busy at the time and couldn't get to rebuilding mine right away, so they sent me another one...

I bought this from Don at FBO a few years ago. B engine and it has one of his limiter plates inside. 22-34-47 all in at 3250 is where it is set now. Works fine. One chip on one of the towers of the cap, but won't effect performance. This will fit in a USPS medium flat rate box at $17.05. So $70...

Set of oem rockers, shafts, hold downs, and pushrods from a 1971 440. Will need a good cleaning. $100 shipped in a USPS large flat rate box. Friends and family only, I will not accept goods and services.

3614014 4 barrel intake just removed from a 1971 440 engine. $35 picked up in west central WI, 100 miles straight east of the Twin Cities.

Cast crank that I just removed from a 1972 400 block. $25 picked up in west central WI, 100 miles straight east of the Twin Cities.

Am in the process of tearing apart a 1971 440. Just pulled these heads off and hate to throw stuff like this in the scrap pile. Free to who ever wants to come grab them. 100 miles straight east of the Twin Cities in west central WI 54727.

Several leftover pieces that I hate to throw away. 69 B-body z-bar access panel, AMD fender brace, 2 AMD rear leaf spring brackets, internal rocker brace, inner fender access plate? 62-65 B-body? not sure about this one, 1970 Duster LR side marker cutout, and 2 from a 69 B-body that I can't...

This was on my 1970 Duster 10 inch manual drum/drum car. I believe it will also work on a disc/disc setup. Worked when removed. $20 plus shipping.

440 Source 200-1152 gold irridite 6 quart "Hemi" oil pan. Fits 383, 400, 440, or 451 motors. 440 Source 127-1030 stock stroke windage tray. I was having an oil leak issue on my 451. Engine builder was pulling out his hair trying to find it. He had me order a new pan and tray, but that was...

Brand new Strange U1600 1350 Spicer with OEM style straps 29 spline. Fits Dana 60 or Strange 60. Made in the USA. These sell for $95. $70.00 plus shipping. Friends and family, Postal money order, cashiers check, or personal check. I will not accept goods and services.

3 items for sale. First is a new Strange U1600 1350 Spicer with OEM style straps 29 spline. Fits Dana 60 or Strange 60. Made in the USA. These sell for $95. $80.00 plus shipping. Second is a set of new Strange H1109H leaf spring pads. Fits 8 3/4, Dana 60, or Ford 9". $14. plus shipping...

2 - 15x8 model 61815 unilug, and 2 - 15x7 unilug model 61715. Center caps, chrome valve stems, and 20 1/2-20 lug nuts with washers. 2 - 275/60/15 tires and 2 - 225/70/15 tires. Wheels are in very good condition. Tires have a lot of tread left but are dated 2007 and 2008. $1200. Located in west...

These are for 10 inch rear drum cars. One complete set and one extra side. $70 shipped in a USPS small flat rate box paid with friends and family. I will not accept goods and services.

I have an extra pair of backing plates that I blasted, 2 coats of SPI black epoxy primer, and painted with PPG 25% gloss black paint. They are in pretty decent condition. There was some pitting on the bottom of one of them, probably from sitting in the dirt for years. Tried to show that in the...

I had this rebuilt by Steer and Gear a few years ago. There are about 1500 miles on it. Still like new with no issues. 1 1/8" sector shaft. $300. picked up in west central WI, or it will fit in a USPS large flat rate box. If shipping, payment is friends and family only, no goods and services...

Anybody know of a source for Holley or Quick Fuel 12.5" power valves? I have seen them mentioned in some articles, but can't find any for sale.