Search results for query: *

Well its been a long time since I've even visited the forum guys sorry about that! I still have my 66 Cuda, and I am planning on finishing the mechanical restoration soon. I will be needing some help I'm sure. Thanks in advance!

Ok i swapped an 8 1/4 rear end into my 66 Barracuda. The car was originally a slant car so it has the original driveshaft. I know it will have to be shortened but the shop i took it to has informed me it cannot be shortened because of the rubber sleeve that is inside. Are they full of Bs?

Does summit make mount s that will work for 360 in an early a?

The car has been sitting for a few years and I know nothing about it except its a /6 new mexico car. Its got some cancer on the driver quarter. Interior its complete but needs restoration. The car its real straight. My ? Is what its worth our what should I offer ?

Will this transmission be a worth while swap for my 66 cuda? I have an 86 model 360 engine that had a manual transmission behind it in the truck I got it from. I would be getting everything shifter and all.

I recently put this rear end in. my 66 cuda. I would like to find a shaft that has already been cut to the right length. I live in a rural area so...

A buddy of mine had some vandalism on his car recently. They busted out the passenger side rear hardtop quarter window. If you have one that will fit please answer this add with price and location. He really needs it before the rains start thanks!

Ok I have been fitting tires on a pair of 15x7 cop wheels on my 66 barracuda. I have replaced the stock rear with an 8 1/4 out of a 74 dart. I put a 225/60/15 tire on the driver side rear to try out. I have less than 1/2 an inch clearance between the quarter panel and tire. it doEs not rub...

Does anybody know the 14 inch width and backspace options for a crager keystone wheel? I have had these wheels for over 20 years I forgot what they are. Thanks I had the width measured at the tire shop. They are 6" width. The backspace looks about 3". What size tire can I fit on a 66 cuda...

ok im on my way to the tire shop tomorrow. I need some tires for the rear on my 66 cuda. I have recently installed an 8 1/4 rear out of a 74 dart. I have stock leafs. I have a set of 4 16X8 inch billet specialty wheels with 4 inch backspace. My question is what size tire should I have them mount...

Not mine but Here it is hes willing to trade too...http://albuquerque.craigslist.org/cto/4289340585.html

Ok I have just about completed my brake disc swap on my 66 cuda. I had a 74 swinger parts car which is no longer available mind you. I have brand new brakes on the spindles ready to put tie rod ends on and the ends on the original suspension will not fit in the hole on the 74 disc spindles? They...

Will 1970 340 heads fit on a 1985 360 block?

I need some dog dish type hubcapts that will fit a stock 15 inch wheel. Please post pictures if you have um thanks!

I just found out these are not gonna fit my 66 cuda. :sad: I have a set of 4 Billet Specialties 16" x8 alluminum wheels they are 5 on 4.5 bolt pattern with 4 inch backspace . They have two different size tires Faulken p195/50r16 for the front and Faulken p235/70/r16 for the back. The tires and...

Have a brand new set of Scarebird brackets for 61-72 9" drum to disc brake conversion. I decided to go with stock 73 and up setup. $100 + shipping in a medium flat rate box from New Mexico. Stock photo

Found some wheels and tires. They are 16x8 5 on 4.5 with 4" backspace. Tires are 195/50R16 on front and 235/70R16 on the back. My 66 cuda is all stock will they fit? I am doing a LBP conversion on the car disc brakes in front and 8 1/4 rear.

I need to know if a 73 abody 8 1/4 will bolt up directly in my 66 cuda? Thanks

Found some wheels and tires. They are 16x8 5 on 4.5 with 4" backspace. Tires are 195/50R16 on front and 235/70R16 on the back. My 66 cuda is all stock will they fit? I know i would have to use adapters to go to LBP.

Hey guys its been a a long time since i have posted, but i am just getting back into this car now. I need a conversion for my 66 cuda to disc brakes on the front. I also have a question on how to keep my brakes in the back and convert to big bolt wheels? Thanks

I start up the car and it idles kinda rough. I let it warm up and then put it into gear and it dies. It will idle all day long but will die when put in gear. The only way i can keep it running is give it a lot of gas and peel out when i put it drive. The engine still sputters even then. I...

Heres a nice car i found not mine. http://albuquerque.craigslist.org/cto/2329463970.html

I have started driving my 66 Cuda now just cruising. I still have lots of work to get it "Road worthy" My question is when i am cruising about 40 or 50 Mph hit a bump or dip in the road creates a floating feeling almost fish tail. I figure its bad leaf springs. When i park my car on a level...

Are they the KH brakes? They are SBP. I am pretty sure they will bolt right on to my car? 66 cuda. Do i have to change the spindles? ball joints? thanks

I have an opportunity to get a 1984 Nissan Stanza for nothing. The car has a blown motor. I was wondering if the disk brakes on the stanza will work with a scarebird setup on my 66 cuda? Is there anything else i could use off the car? Just wondering might be a really stupid question Thanks

my 66 cuda has a serious lean to the driver side in the rear. Its noticeable even just park.ed on a level concrete floor. I am pretty sure the leaf spring is shot? My real question is to remedy the situation temporarly should i put some air shocks or those monroe sensatrack load leveling...

I have the radiator out of my 66 cuda that is in pretty good shape. It does hold water under pressure. I had my 360 hooked up to it for a bit but decided to go with aluminum. I is probably just a good one for recore or something but could be used as is. Also have the original cap with it...

I have one that came out of my 66 Cuda. The lines will need to be replaced. I do not know if the assembly works but the fan does work. It was off a /6 so dont have the brackets for a V8. $50 plus shipping OBO. Willing to sell without compressor also its heavy. Not pictured is the evaporator...

Out of my 66 cuda. I went to a 360 not need for it. Anybody that needs it PM me so we can work out a deal free u just pay shipping. Im in New Mexico Thanks

I bought this a while back thinking it would work for my 66 cuda. I decided i am going with an after market cable since my intake is not stock. Pretty sure its for a 67 or later abody. I actually have 2 of these assemblies. This one has the zbar with it the other does not. $30 plus shipping...