Search results for query: *

Hey everyone. I bought HemiDenny's very cool low mount AC brackets for a small block and I'm just now getting around to install it. My question is what size compressor should I get that will fit in the brackets and cools the down the car quickly. Trying to decide on the Sanden H14...

I bought a Doctor Diff aluminum master cylinder some time ago and now it's getting wore out and was wondering if anyone knows of a place I could buy some new pressure seals? I emailed Doctor Diff but got no reply and tried to start a conversion with him on here but his box is full. Or...

I have a 8 1/4 axle behind my 340 with the 904 trans and it has a Detroit Locker for a differential. I am getting tired of the noise it makes going around corners and it has an annoying click it makes when taking off from a stop that can be heard outside of the car. But my 300 horse motor is...

I plan on taking out the Detroit Locker this winter and replacing it with a limited slip unit. It's an 8 1/4 carrier on a mostly stock car and I see there's two differentials available. There's a Yukon posi unit built like a GM unit. And there's a Spicer Trac Lock unit that says it's good...

Don't flame me for asking about sailboats on a car site but I have been looking for a boat in the 30' range for a while. I half assed learned how to sail in 1977 so I'm not a total newbie at it. And I would take some ground classes to learn as much as I can too. The wife says there is no way...

Ok, without getting into to much detail, what was your car you had at the time? I'll go first. I had a 1971 340 Cuda with a Slapstick and a console.

After much thought I sold her car. She is not happy about it but it was time and with used car prices up 20% we did okay. I've been shopping for a new truck that will probably last me for the rest of my driving life anyway. The prices on these things are hard to swallow! I don't know who can...

Up for sale is two aluminum billet wheel spacers that I will never use. They have a 70.50 center bore which means that there Mopar hub centric. Also have a 4.50 bolt pattern and are .311 thick. Asking price is $30.00 for both plus the cost of the ride. They'll ship from 48182. Thanks!

I have 8 Bosch WR8DP plugs for sale that were bought accidentally be me. They have no run time on them at all and are in new condition. They fit the old style LA heads and not the the newer Magnum peanut sized plug holes. DOH! I am asking $25.00 for eight of them plus the shipping cost from...

I have an extra KYB rear shock that I bought new from Rock Auto last fall for my 67. I installed all four and had rattle in the back right side and I thought it was the shock. So I just bought another one from Summit so I wouldn't have to mess with Rock Auto's return hassle. Turns out it...

Recently I had my rallye cluster out and I changed the dash lights to LED's. I swapped out the clear 914 bulbs to Zevo amber LED's. I have some before and after pictures taken with the car not running with the parking lights on. See what you think. I might add some led strip lights at some...

I have my dash out trying to get the gauges to function. My performance gauge used to work fine two years ago and last year it started to work very slowly. This year it worked even slower, so now that the dash is out I'm trying to fix it. I removed the nipple and there was some corrosion...

Hey Guys, I'm having a problem with my stock oil pressure gauge on the rallye gauge cluster on my car. This year when I got it out the needle wouldn't rise up past 1/4 on the dial and it was always at 3/4 at idle. I checked it with a mechanical gauge and it's at 75 psi at idle. So yesterday...

Just a heads up about the Sumo Citrus mandarin oranges. If you've never had one now's the time to try some. They have a short season January thru March I thing it was. There not cheap by no means as there about $2.00 a piece. But probably the best orange you'll ever taste in you life.

I have a set of four used cam bolts and the nuts that I replaced on my 1967 Barracuda, but I'm sure they would fit other A bodies. They are in good shape and functioned fine. When I rebuilt my front suspension years ago new ones came in the kit so these were replaced with everything else...

I have a SBP steel wheel for sale. It's been powder coated and it has no dents. It would make a nice rim for a spare tire for your small bolt pattern A body. I'm asking $25.00 for it and the shipping will be from 48182. The shipping cost will be on your dime.

I'm looking for the weld on strap brackets for my 67. I'm tired of the exhaust rubbing on the strap on my 67 setup. Thanks.

I have a used HV Melling oil pump for a small block. It has the Mopar pressure relief spring kit in it. It was used in my 273 for around 1000 miles so it has lots of life left. Asking 25.00 for it ad it'll ship from 48182 zip code.

Cleaning out my storage I've found some lightly used brake shoes for a 7 1/4 axle. They have a little wear on the ends on the pad but the rest of the looks as if it never touched the drum. They are 1 3/4 inch wide and fit 10 inch drums. I was going to pitch them but if someone wants to pay...

It's a dual circuit master that came off of my 67 Barracuda. It has the 1 1/16 bore for a power brake booster. I bought it as a rebuilt Mopar unit and used it for four years so it was used very little. It worked perfectly when I removed it and went to a manual aluminum master. I think it...

Here's two taillight lens I removed from my car when I bought new ones. There original and show there age. They have fading and small chipping on the face side bottom. The inside has a chip around one of the mounting holes and a cracked light diffuser. When there mounted they will look ok...

Wife and I went to see it at the IMax theater and was impressed at the engineers back then. They didn't rely on computers like we do today and did it with pencil and paper. Those people were pretty clever. Here we are 50 years later and Space X has finally launched a maned capable rocket...

I have a pair of 452 heads that came off a running engine. They were never removed till I took them off. I'm asking $80.00 for the pair and I'm going to the Nats and can bring them down with me. If shipping they'll ship from 48182 on your dime.

I have a RV 2 compressor for sale. It came off my 67 Barracuda and also includes the brackets that bolt to the intake. I replaced the front bearing with a new one and it was dissembled and had all new gaskets and seals installed. It was converted over to R134 and the clutch worked when I...

I have a pair of stock 273 heads that came off my 67 engine. They have some rust on the machined surfaces and will need to be cleaned up. They have been angled milled to a closed chamber head for a bump in compression. All the valves were bought new and there's about 2000 miles on the valve job...

I have two small block torque converters for sale. The green one is a stock stall unit that fit 67 and earlier 904's with a neutral balance. I bought it as a rebuilt unit and put about 3000 miles on it. It worked perfectly as you would expect from a stock converter. Asking $30.00 for it...

I have 4 14 inch hubcaps with the Plymouth logo on them for sale. The paint is faded and worn but these are in great shape. No big dents or scratches on any of them. They'll ship from 48182 and I'm asking $50.00 for all four pieces.

Up for sale is a left and right side exhaust manifold set off of a 273 engine . They came off my car so I know that they fit 67-69 abodies. There in great shape with no cracks or repairs. I'm asking $60.00 for the pair and the shipping is additional. They'll ship from 48182. I can deliver...

I have an Addco anti sway bar that came off my 67 Barracuda so I know it fits that year. It worked fine and I took it off as I didn't like the way it looked on my car. Its 1 1/8 diameter and has all the brackets and I have the paper instructions for installing it. It fits cars with no tab on...

I have 4 small bolt Rallyes for sale. There in good condition with no rust. There not bent or have any dents. There are no caps or trim rings for them. Two rims have tires and two don't. The 14 inch tires can come off or if you want them they can stay on. They would ship with no tires from...