Search results for query: *

Vent is not plugged,and outside seal is fine.I haven't worked on too many axles to remember if that large of a gap is normal or not?

All good

Yes,that is what I'm talking about.That is normal...?? I'm surprised because I had the leak and the seal looked fine,but I replaced it anyway.

Stock axles,the 1/8th gap you can see in the pic.....is that normal? Replaced the inner seal and foam gasket.

I noticed gear oil on my breaks,so I took it apart and replaced the seal.When putting it back together I got the end play correct,but there is an 8th of an inch gap! I have a 489 case,the Thrust block I could was still there, and moving side to side like it's supposed to .Could it be the bearing...

I got the single adjustable QA1 rear shocks,they came with a packet of sleeves with them.I installed the correct two that fit inside the black outer bushings,of the top and bottom of the shock. The width of the sleeves, is the same as the outer edge the the black rubber bushing that are on the...

Did you install a Hold off Valve for your rear drums? I had the same problem as you!! It stumped me for a long time,the only way I could get the rear brake to bleed was to do a gravity bleed one at a time.

So will it fit a 69 A Body?

I'm having trouble finding a Master Cylinder for my 69 Dart. I had 10in Drums,but now swapped to OEM KH Callipers. No power booster,does anyone know where to get a disc brake non-power Master Cylinder? Thanks

I'm a little confused as to how the pads slide back and forth on the 4 piston setup? With the pad retaining clips in place that are on top of the caliper-it seems as though the pads are locked in place with the pressure of the clips. Am I missing something here? Any help would be greatly...

Will old mustang Calipers fit a 69 Dart with 14in Rallys? :-D http://cgi.ebay.com/ebaymotors/Loaded-Kelsey-Hayes-KH-Caliper-Set-Mustang-Hoses-Pads-_W0QQcmdZViewItemQQhashZitem563a6c685dQQitemZ370347370589QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I have the Stage 2 and it is great !

Hi,does anyone know if the tuff Stuff Chrome Brake Boosters will work on a 69 Dart ? This is a link to a couple of them with the Master attached. http://www.tuffstuffperformance.com/products/part.asp?partid=233 http://www.tuffstuffperformance.com/products/part.asp?partid=182 Any help...

I put in the Firm Feel Stage II a few years back!!! I just wish I did it 20 years ago,what a difference than the stock piece of @#%& !! :thumbup:

Thanks Guys !

Thinking about getting the SSBC conversion,or the Wilwood for my 69 Dart,does anyone know if it will clear my stock 14in Rally Rims... Small Bolt pattern? I want to keep my rallys. Thanks

I'm looking to change my 10in drums small bolt, to disc small bolt,I have the spindles from a doner 69 A Body. Just wodering what other parts I will need to swap? I have read that I will need lower ball joints from a disc car.....??? But also, there is mixed opinions on if the upper control...