Search results for query: *

$100 + shipping (free pickup in the Detroit area) One original set of 4 wheel opening trim pieces. All four have nice ends, 2 are pretty decent and 2 are getting kind of rough....but all are very usable as is or could be restored....just never made it back on my Duster before I sold it. I...

$100 + shipping (free pickup in the Detroit area) Bought for my 1972 Duster...that I no longer own. Been hanging on my garage wall for a number of years now. Used one Summer before switching to an aluminum radiator, which had no mounting tabs. My fan did hit the shroud a couple times because...

$100 + shipping (free pickup in the Detroit area) I bought this here in FABO but I sold my Duster before using it. Never used...includes instructions. I am pretty sure most everyone has seen these kits on FABO from "crackedback", but here is the link: Plug and play - Headlight Relay Kits

$20,000 OBO (I have always regretted selling my grandfather's 66 Belvedere II, so I will consider a trade on a 1966 Belvedere/Satellite or 1967 Belvedere/Satellite/GTX) 1972 Plymouth Duster 92,*** miles on rust-free body 1200 (approximately) miles on engine Located in a northwest suburb of...

Like the title says...I am looking for a nice black front arm rest for my 72 Duster. I believe all A-Bodies maybe from 1968 to 1972 all used the same arm rests. I would prefer to send a money order since my Paypal account is out of money. A picture and how much $$$ would be great. Thanks, Paul

$325 includes shipping. New Mopar A-Body CALTRAC Traction Bar System Brand new unused bought new, just sitting in my basement gathering dust. I bought them for my Plymouth Duster and have decided not to use them All parts are still wrapped up in the box they came in, I opened the the box to...

$125 Shipped to your door. Finish is still pretty decent, could use a little clean-up. It has a manual choke set-up. I believe the carb to be stock as far as jets and the rods go. It came on my Duster when I bought it and I used it on and off for maybe 1000 miles or so. I installed a...

Upgraded to a Big Bolt Pattern set-up last Spring and just finally had a chance to snap a couple shots after the Baker's of Milford Sunday Car Cruise. Now she is a lean and mean street fighting machine. Paul

MECHANICAL ITEMS All Items $11.00 each plus the shipping costs • electric cooling fan (used - good working condition - I don't know what CFM?) • SOLD front leaf spring bushings (new - AC Delco part #45G17012 SOLD • SOLD shackle bushings (new) SOLD • upper ball joints...

INTERIOR ITEMS All Items $11.00 each plus the shipping costs • SOLD Stainless steel accelerator bezel (new - 1971-1972 A/B/C/E body) SOLD • SOLD Black arm rest (used) SOLD • SOLD dash cluster bezel (used - pretty nice chrome for original) SOLD • glove box door...

$125 plus shipping Located in Northville, Michigan 48167 These came off a running, driving and stopping 72 Duster. Stock style bearings are of unknown age but work fine. Each axle has three of the original studs and two studs that were replaced at some point in time. Paul

$125 plus shipping. Located in Northville, Michigan 48167 Nice rust-free drums off of a running, driving and stopping 72 Duster. They came off of a western car so they are still really nice, you can even still see the Chrysler Pentastar stamped in them. Paul

$60 plus shipping. Located in Northville, Michigan 48167 A pair of backing plates for an 8-3/4" B-body rear end. These are for the wider brake pads, and can be used with Dr. Diff Axles when converting your A-body to a Big Bolt Pattern. They are rust-free (painted Satin Black?), I bought them...

$60 plus shipping. Located in Northville, Michigan 48167 A pair of backing plates for an 8-3/4" A-body rear end. They are rust-free (painted Satin Black) and came off a running and driving 72 Duster. Paul

$125 plus shipping Located in Northville, Michigan 48167 Used small bolt hubs that were cleaned up. These are for use with Kelsey-Hayes 4 piston calipers. I bought the rotors and studs new, they now have 1,000 or so miles on them. You will need to supply the bearings. Paul

$60 plus shipping. Located in Northville, Michigan 48167 Small bolt pattern spare from my 72 Duster. No rust and original paint on the wheel. Brand new 185/75R14 tire that has never been used. Will work great as a spare in your trunk. I picked that size tire to minimize how much the spare...

$150 plus shipping. Located in Northville, Michigan 48167 Refinished then used one Summer. There are a couple chips here and there, but still ready to bolt on to your engine and look great. Everything works as originally designed. Stripped clean, repainted Hemi Orange, new decals (the...

Hello Gang, I switched from small bolt pattern wheels to big bolt pattern wheels and will not longer need these items so I was wondering what a fair price for my SBP stuff would be. All items came off a functioning vehicle. 1) a pair of front hubs with new studs and rotors (approximately 1,000...

I need a good working driver side (left side) window regulator for my 1972 Duster. Let me know what you have and how much to ship it to me at Northville, MI 48167. I haven't tried to take my existing one out, since my window does go up and down right now I don't want to be windowless. It's...

Converting my 8.75 rear to big bolt axles from Dr Diff and I can't get them to go in all the way. They start to go in and stop with about 3/8" to go, I tried turning them a little bit and pushing (also turning them a lot)...but no luck. I can get the nuts started on the housing bolts but I...

Last year I needed a new battery. So I picked one up from O'Reilly Auto Parts. After peeling off the ugly original decal on top, I saw 6 little round plugs and that got me thinking...hmmmm Bought some vintage Mopar battery caps and a battery decal off of eBay. It was a Super Start...

Is there any website (or anyone here) who knows where i can find out how much different wheels weigh? Just the rims and not the tires. Specifically looking for the weight of Mopar Rally wheels, Cragar SS, American Racing Torq Thrust II and Weld Racing Draglite wheels. I am looking for 15 x 6...

$35 includes shipping I believe these are aftermarket repros, I couldn't find a Chrysler logo on them and I think they are too nice to be original for my 1972 Duster. They look awesome with good studs on the back side. A couple small spots where the white paint is coming off, but the chrome...

$100 plus Shipping & Paypal Fees (send me a check/money order if you want to save on the fees). I am not going to use this, I bought it from someone who bought it from the dude on ebay that sells these. He currently sells them for $150 and the cost of shipping, I just want to get my $100...

I am switching my Duster over to use large bolt pattern (lbp) wheels from the small bolt pattern (sbp). I am going to keep the Kelsey Hayes front disc brakes but use the Mustang rotors for the bolt pattern. My question switching the rear brakes...should I go with the 10" or 11" b-body drum...

1/18 Scale Diecast Cars $15 For Each Car Plus Shipping. Cash, check money order or Paypal. I don't really need to sell these, they used to be displayed in my son's bedroom but since he stopped caring about cars several years ago, they have just been sitting around boxed up in a closest. A few...

Set of four 14" Rally wheels with center caps (repro), shiny trim rings (repro & not brushed), chrome lug nuts and Firestone Firehawk Indy 500 tires. The rims are original, used and have been cleaned up on the front side and repainted. All other items were bought brand new 2 years ago. Not...

$117.50 plus shipping. --------------------------------- Bought from Phoenix Graphics (Part #CT1106). It set me back about $235. This is a complete set of WHITE stripes for a 1972 Duster with printed tornado in the side stripe (these are MORE expensive then the plain stripes). These can be...

$185 plus shipping. --------------------------------- Bought from Phoenix Graphics (Part #CT1106). It set me back about $235. This is a complete set of WHITE stripes for a 1972 Duster with printed tornado in the side stripe (these are MORE expensive then the plain stripes). Some of the...

$240 Shipped anywhere in the US of A. Came off my mild 340, went with a bigger carb when I rebuilt the engine bigger and badder last year, no longer needed. No known issues when running last Summer. When I refreshed the carb, the front float needed to be replaced so I ended up with a new...