Search results for query: *

  1. B

    1968 Barracuda Tail Panel

    Those appear to be where the 68 trim attaches.
  2. B

    1968 Barracuda Tail Panel

    Thanks for the replies guys….I would like to keep the 68 tail panel considering the tail lights. I think the stripe might just be the way to go. This is the first early barracuda I’ve owned. I bought it about 2 months ago and keep finding stuff the seller misrepresented. I trusted him more...
  3. B

    1968 Barracuda Tail Panel

    Hey guys, I picked up this 68 barracuda a couple months ago and the tail panel trim was not installed. It came with the 68 trim as well as a 69 trim panel. My question is regarding what seems to be an excessive amount of holes in the middle portion of the panel (see photos). Is there some kind...
  4. B

    [FOR SALE] 1972 duster with magnum swap

    This was a car my buddies and I built two years ago for the Roadkill Zip Tie Drags in Tucson, AZ. We road tripped it almost 1,500 plus miles without incident. My son has been driving it back and forth to school since then and its been dead nuts reliable. I'll get the bad out of the way first; it...
  5. B

    5x4" to 5x4.5" dr. diff kit, Questions.

    Yeah, I was just referring to the fact that sometimes the difference between Ford and Mopar wheels is that the load on one rides on the lugs and the other on the hub. I don't remember which is which as it was something I looked into a long time ago. Maybe just do some research into it as if it...
  6. B

    5x4" to 5x4.5" dr. diff kit, Questions.

    Agreed....Just be careful of the whole "lug centric vs. hub centric thing"
  7. B

    6BTM or locked out timing?

    https://www.theturboforums.com/threads/72-valiant-more-door-stock-318-twin-turbo-running-02-24-12.359972/ Here is a link to the SUPER low buck turbo valiant I build years ago. Definitely down and dirty. Junkyard turbos, boost referenced mechanical pump etc. Wish I still had it but it ended up...
  8. B

    6BTM or locked out timing?

    It’s an MSD box that has a boost reference line. You can adjust a dial to remove X degrees of timing per pound of boost. That way it drives completely normal when you’re not into the boost. I used mine with my stock electronic Mopar distributor in the 318. Don’t see why it wouldn’t work with a...
  9. B

    6BTM or locked out timing?

    The msd btm is well worth it for street driving. I used one on my turbo 4 door build.
  10. B

    GIVING IT AWAY

    It took a few trips of driving the duster on his own before my son really got what it meant. I think it was no fun when I was in the passenger seat telling him what to do. Once he got out on his own....he came back with a smile on his face and a respect for the power of it. LOL. Nice car BTW
  11. B

    [FOR SALE] 1972 Duster

    You can also check out all the build photos on instagram @revenanthouse
  12. B

    [FOR SALE] 1972 Duster

    This was a car my buddies and I built last year for the Roadkill Zip Tie Drags in Tucson, AZ. We road tripped it almost 1,500 plus miles without incident. My son has been driving it back and forth to school since then and its been dead nuts reliable. I'll get the bad out of the way first; it...
  13. B

    Oil consumption and ticking after cam swap?

    Thanks for the real world info Bobzilla. Could be some clearance issues there then. I didn't check anything as I was assembling it at 3:00am and we had to leave at 5:30am :) I'm glad I did the magnum swap however I'm finding the budget/power deal only goes so far. Even EQ heads are pretty...
  14. B

    Oil consumption and ticking after cam swap?

    I assumed the shape of the bottom side of the retainer is different.
  15. B

    Oil consumption and ticking after cam swap?

    Carbed....Performer RPM with 650 DP.
  16. B

    Oil consumption and ticking after cam swap?

    Good point. It doesn’t seem to run like it has a vacuum leak but definitely a possibility I suppose. I guess I should’ve mentioned I got the matching springs and retainers from Hughes. I was told this setup would be good go as far as coil bind and piston to valve on a stock short block.
  17. B

    Oil consumption and ticking after cam swap?

    My son and I installed a junkyard 5.9 magnum into a 72 duster last year for the Roadkill 3k hooptie challenge. It was out of a 2001 durango with unknown miles (rear end collision). We finished the install and took off on a 1500 mile road trip the same day. We made it with no issues and the...
  18. B

    Trans shift points?

    This will only affect your part throttle shifts. To change WOT shift points you will need to change or modify the governor weights. A&A trans sells weight kits for different RPMs.
  19. B

    Oil capacity for magnum with LA pan

    Thanks for the good input guys. I will give it a shot. I like the idea of shortening the dipstick from the handle side.
  20. B

    Oil capacity for magnum with LA pan

    Ok. How much oil is this thing actually supposed to take. I used the summit 5.9 magnum with 360 oil pan. Shorter style oil filter. The dipstick is pretty much useless since it’s matched to the original magnum pan (I’m using magnum accessories).
  21. B

    How many are running factory efi on your magnum swap?

    Wow..That is a nice setup! 525 ft lbs to the wheel is insane. Thanks for the info.
  22. B

    How many are running factory efi on your magnum swap?

    Curious for those that are, what harness and engine management are you using? Stock stuff? Mega squirt? How much power are you making? I did the carb deal originally but considering tossing the stock efi on.
  23. B

    5.9l oil pan

    I used the magnum gasket with the magnum timing cover. Right stuff in the corners. No leaks. 6k miles or so.
  24. B

    [SOLD] New Enginequest Magnum Head

    Never mind. I posted before the replies loaded. Lol.
  25. B

    Radiator cooling fan

    my fan is from a Durango. I’m using the stock radiator in my duster still. I actually had it touching the upper hose so I had to move the radiator up on the core support slightly.
  26. B

    5.9 magnum header bolts

    I would be afraid of clearance from the bolt head to the pipe more than anything. Most 3/8 bolts will probably have at least a 7/16 head. It gets tight on a couple of tubes.
  27. B

    72 steering box

    I don’t know if these help or not . The pitman arm stud is a lot father from the starter than it appears in the photo Mini starter though...and power steering box
  28. B

    72 steering box

    i’ll Check. What was changed? Is this a fresh build or just a steering box swap?
  29. B

    72 steering box

    Have you double checked that the drag link isn't installed upside down/backward?.....don't ask ;)
Back
Top