Search results for query: *

  1. B

    Barracuda Turn signal indicators inop on dash cluster

    Hi, no I did not run a separate ground. Everything else is working properly just the turn signal indicators are inop on both sides. Completely baffled it seems pretty uncommon that both circuit boards would be defective. Both harness are showing let the power from the turn signals are making it...
  2. B

    Barracuda Turn signal indicators inop on dash cluster

    Well as an update I'm getting power for the turn signal indicators on the harness at the dash cluster. The left signal comes from the three pin the right signal comes from the 8 pin Yet neither one is working on the cluster. I tried switching bulbs and switching the black plastic holders. Still...
  3. B

    Turn signal indicators inop on dash cluster

    Thanks I appreciate it!
  4. B

    Turn signal indicators inop on dash cluster

    Does anyone know what color the wire would be coming out of the column that I should check? I tried looking to find the 3 pin connector on an online schematic but I actually don't see it. I know what should be the top wire on the three pin at the cluster. Trying to do it without pulling the...
  5. B

    Turn signal indicators inop on dash cluster

    I should just be able to ground a test light and then probe the top wire on that three wire plug on the back of the cluster? In theory that should be the wire that sends power to the indicators on The cluster? I certainly hope the new circuit board is not defective...
  6. B

    Turn signal indicators inop on dash cluster

    Thanks I'll check it out it just seemed weird that they were working both the front and back outside of the car... just not working on the indicators on the cluster.. I know the 3-pin is plugged in correctly on the circuit board.. I'll have to look around for the wires coming out of the column I...
  7. B

    Turn signal indicators inop on dash cluster

    Hi working on the 67 Barracuda. Just installed a new wiring harnesses and new circuit boards on the cluster and all new bulbs. Everything seems to be working with the exception of the turn signal indicators inside the car the turn signals are working correctly outside the vehicle just no...
  8. B

    8 Pin round connector on Rallye dash

    I believe it is. I'll try to get an inspection mirror behind it tomorrow maybe. I replace the circuit boards when I was out as the old one had loose pins. It's also a new wiring harness. But boy it's just seems like it's way more effort to even get it as far as it is than it should be. It...
  9. B

    8 Pin round connector on Rallye dash

    Hi trying to reinstall the dash on a 67 Barracuda. Just wondering if this gray plastic round connector is supposed to seat all the way to the circuit board? Or if this is as far as it's supposed to go? Don't want to keep pushing on it and start breaking pins off or something.
  10. B

    67 Barracuda headlight switch wiring?

    That makes sense, thanks for the info!
  11. B

    67 Barracuda headlight switch wiring?

    Thanks very much for the help... I appreciate it everyone!
  12. B

    67 Barracuda headlight switch wiring?

    Okay thanks you reply so it's just kind of optional at this point? I'm not the one that disconnected it so it always adds to the challenge of figuring it back out.. thanks again
  13. B

    67 Barracuda headlight switch wiring?

    Okay I don't see any kind of a wire for it? A quick look at the diagram if I'm reading it correctly I don't even see it on here?
  14. B

    67 Barracuda headlight switch wiring?

    A picture of the plug but not sure what that bottom terminal is for?
  15. B

    67 Barracuda headlight switch wiring?

    I'm going to reinstall an M&H harness in my 67 Barracuda, on the bottom of the terminal there looks like there's a single Spade connection but I don't see anything for it? Am I missing a wire somewhere or have I lost my mind? Or possibly both? Lol thanks for any help I appreciate it!
  16. B

    Loose heater box?

    Thanks very much for the information and the picture. I will be very happy to get to a different section on the car instead of the heater box!
  17. B

    Loose heater box?

    I believe so I have to get some of those to try to hold everything together. Still trying to figure out where that ground wire goes that comes from the passenger side kick panel area up towards the blower motor.. I will be very happy to be done with heater box time...lol
  18. B

    Loose heater box?

    Trying to get that rod attached that's in between the heater core pipes. The picture I found on here the bracket is somewhat different mine feels like it's just straight in and out without a Bend so the bracket keeps falling out? Different than the picture that I found that I'll attach.. did...
  19. B

    Loose heater box?

    I found some pictures in another thread of that rod in between the two heater core Inlet and Outlets... just not sure on that ground wire? Thanks again
  20. B

    Loose heater box?

    So would anything go on up at the heater controls though it seems like the cable would just pop off if not? Also the one rod that comes up between the heater core Inlet and return does that look like it's in the right spot the rod feels extremely loose? Not sure what kind of damage this guy...
  21. B

    Loose heater box?

    Thinking this is the third Cable location?
  22. B

    Loose heater box?

    Also good call on the J hook being the problem for the loose heater box. Thanks gang. On the three heater control cable hookup is it right that one of the cables goes to an arm on a heater box that's in between the tubes coming from the heater core I believe? Also on the fresh air door I took...
  23. B

    Loose heater box?

    Quick picture of the heater control you can see the cable just laying loose on the white plastic piece there are two hooked up like that the third cable is on metal.
  24. B

    Loose heater box?

    Right, that's what I was thinking not sure what they're called or where to order some of those little push tab things? You are correct if there was a problem and they would just pop off.
  25. B

    Loose heater box?

    I'll take a picture of it tomorrow it's just on the heater control switch or the cable end slides onto it.. there are two white tabs and one metal tab for the three cables
  26. B

    Loose heater box?

    Thanks I've seen the clips that hold the housing of the metal cable on. Does anybody have a picture of what kind of clip is supposed to go on the white little plastic part on the heater control? Apparently I'll be on the hunt for some of those..
  27. B

    Looking for a good price on upholstery.

    Have you tried looking on legendary Interiors website? Everyone seems to Rave about the quality that I have heard.
  28. B

    Loose heater box?

    Thanks I can feel a bolt up there or a rod that feels loose? I'll have to go out there in the morning and see what I can see.. does it tighten up somehow or does it just hook on?
Back
Top