Search results for query: *

Let me start with I just need a running motor to put in my 62 Valiant Wagon. And I just acquired a 273 motor which has a factory replacement tag from 69. But it has the 64/65 heads. is there anything special this block / head combo

In need of a 273 Pushrod for a solid adjustable rockers. 7.5 X 5/16

Ever have one of those days / projects this rear end is kicking my butt. Anyone know where I can get one of these spider gears

Thank you in advance for any and all help. Well I was putting 8 3/4 clutch pack back together and when I was bolting the 2 half’s together one of the case bolts broke. So I need to know if anyone knows where I can get these bolts.

Looking to trade my 62 Vailant Wagon for a 1973 Dodge Dart Swinger 318 A/C car would really like to find a green car with green vinyl top and green interior. High school car. I will up load pictures of the Wagon later today. I’m in Biloxi MS and will travel for the right car.

Ok so I put a new quick fuel carb on my 67 cuda with a 318 had to work the gas pedal to get it to full throttle. Get it working good so desire to take it for a small drive, that's when all Heck happens the car goes full throttle and locks hard brake tiring to control car get off road shift to N...

I currently have a 62 Valiant Wagon with the original /6 and push button transmission. I am wanting to replace that with a V8 but keep the push button setup. My question is would it be possible to take a V8 model 904 transmission that is not a push button and swap all the parts from /6 to the V8...

Good morning, I am looking for / in need of the passenger side Barracuda Fish emblem for my 67 Barracuda. Thanks

In the middle of trying to install my transmission and can't seem to get the TC to drop all the way down. It's 904 tranny that I just had rebuilt with new TC, I have been trying to get the TC to drop into place and it just don't seem to drop any farther down then what u see in the picture

Please help I just had my 904 rebuilt and was advised to get a new TC. So how do I know which one to buy a lock up or non lockup? Don't know the year of the tranny

I know it's not an A body but it's a Dodge its a 1978 Dodge RamCharger

Well I just rebuilt my 904 transmission got it installed fired up the motor and nothing happens when I place the transmission in gear any gear. So anybody have any ideas I'm thinking I might have to take the transmission out again and check either the torque converter and or forward pump. If any...

Long story short I have a 318 in my 67 Barracuda I switched over to power steering I picked up a new pressure hose and the end that goes to the steering box won't fit the female end is too big. But the male end that goes to the pump will not fit no room behind the pump and the K frame. I have a...

Wife just told Andy Griffith past away to at 86 He was a good man and a great actor RIP

Hello all, I am in need of a couple of items to complete my 67 Barracuda restoration. 1st I am in need of a headlight button and rod, I have a new switch 2nd transmission linkage from floor shifter to the transmission have all other linkage 3rd ebrake lever pins the one that hold the lever to...

Got in my truck this morning stated it up put in reverse and the engine rev's no movement, go to drive no movenment,:banghead: place it in Nuetral popped the hood- raise the driver seat to get a rag out of the back to check my fluid level seat slams forward now it won't go back. Fluid level is...

I just installed my column and steering wheel and when I hooked up the Battery the horns goes off. I have taken off the horn button, disconnect the wire on the steering wheel and it still goes off. I finally had to remove the steering wheel to stop it from going off. This is on my 67...

I was at the dealership yesterday and they just got this truck in on trade. I wish I had the money Its a 2013 Ram 2500 Power Wagon with less then 5000 miles on it.

I am need of one K/H hub if anyone has just one they would like to sell please let me know. Thanks

As some of you know I posted my Daughters car got flooded and we are about to settle with the insurance company and she wants to buy a 2014 Dart. I would like to hear from anyone who has one and give me an honest opinion of the car.

I am in the process of rebuilding a set of K/H Brakes. I have two different hubs no real issues as far as I'm concerned but when I ordered bearing and races. I removed the races from both hubs and when I installed the new races on the one hub everything fit correctly but on the other hub the...

I just picked up a 83/4 rear end with SBP 10" drums but all the hardware for the brakes are missing. So if anyone has or know where I can get replacement parts please lie me know Thanks

Well with all the rain that fell last night in Mobile at South Alabama where my little girl goes to school and her 2013 Nissan was parked in the parking lot on campus flooded last night. Which she lost not only the new car I bought here but she also lost a laptop, school books, and other items...

I'm in need of one headliner bow clip/ pocket. I am trying to install my headliner and one of the little triangular clips that the headliner bow slides in broke. So if anyone has one please let me know. Thanks Ron

I just completed a 5K Zombie Run with my two girls it was a blast

I am in need of both the left and right side interior light assemblies for a 67-69 Fastback Barracuda. While I'm thinking of it I am also in need of both driver and passenger door flap seal (lack of a better name) that goes in the front of the door. Thanks Ron

I'm in need of the front and rear band struts / keepers When I took my tranny apart I only had one strut for the front band and I did not have one on the rear band ( not sure why or where it went ). Thanks Ron

Started my 904 trans rebuild watched the videos posted here followed up to the forward pump removal, I don't have his special tool nor do I have a a slide hammer, and have not seen anything on this site about removing the forward pump assembly. Does anyone have any helpful hints on how I can...

I have been looking for info on this but could not find any, But I saw where another member here was selling /6 TC that was bolted to a SB flex plate to install on a 318. I guess the question I have is will this work and or what if any benefit will this do? The only reason I am asking is that I...

Not mine but if I live anywhere near I would snatch this up. One bid for everything in the pictures for a 67 Barracuda for 150.00 http://www.ebay.com/itm/1967-Barracuda-misc-/161161112229?ssPageName=ADME:X:RTQ:US:1123 If I had a way to pick up I would have already pulled the trigger